
Ski-Doo snowmobiles have dedicated forums for enthusiasts to discuss issues and share tips. One common issue is the removal of old fuel lines, with some users reporting that they are difficult to remove and recommending the use of a utility knife or razor blade to cut or split the line. Another issue is the type of fuel line used, with some users expressing a preference for clear fuel lines over coloured ones. Additionally, Ski-Doo snowmobile owners should be aware of the recommended type of fuel for their specific snowmobile, which can be found on the gap cap, and general fuelling tips such as not topping off the tank and fuelling while standing to prevent spillage.
Explore related products

Fuel line maintenance
Fuel lines are critical components that supply engines with the fuel needed to operate efficiently. Proper fuel line maintenance is essential for the reliability, performance, and safety of the engine or generator. Here are some steps to maintain your fuel line:
Shut off the fuel supply valve: Before performing any maintenance or inspection, ensure the engine or generator is turned off and completely cooled down. Shutting off the fuel supply valve prevents fuel from flowing through the lines during maintenance, reducing the risk of spills or accidents.
Visually inspect the fuel lines: Carefully examine the fuel lines for any signs of leaks, cracks, corrosion, or wear and tear. Pay close attention to connections, joints, and the entire length of the line. If you notice any issues, address them immediately by repairing or replacing the affected sections.
Remove debris and sediment: Clean the fuel line by removing any accumulated dirt, debris, or sediment that might obstruct the fuel flow. Use appropriate cleaning tools and materials recommended for fuel systems to avoid contamination.
Inspect and replace fuel filters: If your system has fuel filters, ensure they are inspected and replaced according to the recommended maintenance schedule. Clogged filters can restrict fuel flow and impact the performance of the engine or generator.
Tighten connections: Ensure all connections, fittings, and clamps along the fuel line are securely tightened. This helps prevent leaks and ensures that the connections do not loosen during operation.
Conduct regular maintenance: Fuel lines should be maintained and inspected regularly to prevent unexpected failures. This may include periodic inspections, cleaning, and replacing components as recommended by the manufacturer or based on usage. Maintaining a regular maintenance schedule helps ensure the optimal performance and longevity of your fuel line.
It is important to note that fuel lines can vary between different machines and vehicles. Always refer to the manufacturer's guidelines and seek professional assistance if you are unsure about any maintenance or repair procedures.
The Fuel Line: Where Does It Connect?
You may want to see also
Explore related products

Fuel spillage
Another potential cause of fuel spillage is a faulty or damaged fuel line. If the fuel line is old or cracked, it may leak and cause fuel to spill. In this case, it is recommended to replace the fuel line with a new one. Additionally, if the fuel pump is not working properly, it can cause too much air to be sucked into the system, leading to fuel spillage. Regular maintenance and replacement of old or worn-out parts can help prevent fuel spillage and ensure the safe and proper functioning of the snowmobile.
It is important to note that the type of fuel used can also affect the performance of the snowmobile and the risk of fuel spillage. The recommended type of fuel for a Ski-Doo snowmobile can be found on the gap cap of the vehicle. While automotive fuel of at least 87 octane and no more than 10% ethanol is generally safe to use, higher-octane, non-oxygenated fuel may be specified for optimal performance. It is important to follow the recommendations provided by the manufacturer to ensure the safe and efficient operation of the snowmobile and to minimise the risk of fuel spillage.
A Quick Fix: Temporary Fuel Line Solutions
You may want to see also
Explore related products

Fuel type
Ski-Doo snowmobiles are fuelled by gasoline. The recommended fuel type for a specific snowmobile can be found on the gas cap of each Ski-Doo snowmobile. Generally, automotive fuel with an octane rating of at least 87 and an ethanol content of no more than 10% is considered acceptable. However, E-15 and E-85 fuels should be avoided as they can damage the engine. For optimal performance, high-performance snowmobiles may require 91-octane non-oxygenated fuel. Oxygenated fuel should not be left in the machine for more than 30 days. It is recommended to use the fuel specified on the fuel cap, but occasionally using 87-octane automotive fuel is acceptable, although it may result in reduced performance.
When fuelling a Ski-Doo snowmobile, it is important to stand as the fuel tank is located under the seat. Applying pressure to the seat during fuelling can cause fuel to be pushed out of the tank and onto the rider or passenger. It is also recommended to control the fuel flow directly by hand rather than using the locking device on the fuel pump handle. Additionally, it is important to avoid overfilling the tank as fuel expands with temperature changes, and spillage can damage the finish of the machine.
Fuel Line Requirements for 800-Horsepower Vehicles
You may want to see also
Explore related products

Fuel tank filling
Filling the fuel tank of a jet ski is a straightforward process, but there are a few important considerations to keep in mind. Firstly, it is essential to know the type of jet ski you own, as different models have varying fuel requirements. For instance, a non-supercharged jet ski (under 200HP) can run on regular 87 octane fuel, while a supercharged jet ski requires higher octane (premium) gasoline. Additionally, it is recommended to avoid using fuel with a high ethanol content, as it can cause issues in watercraft.
The cost of filling a jet ski fuel tank can vary depending on the model and the current gas prices. On average, an empty jet ski fuel tank can cost between $30 and $150 to fill up. The Sea-Doo Spark, for example, has an 8-gallon gas tank, which would cost $32 to fill if gas is priced at $4 per gallon. Most jet skis, however, have an 18-gallon gas tank, which would cost approximately $72 to fill at the same gas price.
When refuelling your jet ski, it is crucial to ensure that you are in a well-ventilated area to prevent the buildup of fuel vapors, which can be dangerous. After refuelling, it is essential to vent your jet ski to release any vapors that may have escaped into the engine compartment. This can be done by removing the seats or opening an access port to allow fresh air to circulate.
In terms of the refueling process itself, there are a few options available. Many marinas offer refueling services for jet skis, but this can be more expensive than refueling at a gas station. If you choose to refuel at a gas station, you will need a truck and a trailer to transport your jet ski. Additionally, you can use a fuel transfer pump to make the process more convenient and mess-free.
Lastly, it is worth noting that jet skis do not require any special fuel beyond the considerations mentioned above. They use the same gasoline as cars, which can be easily sourced from gas stations. By following these guidelines, you can ensure that your jet ski's fuel tank is filled safely and efficiently.
Understanding the Basics of SAE 30R7 Fuel Line
You may want to see also
Explore related products

Fuel line replacement
Firstly, you will need to carefully remove the old fuel lines. If they are still the original lines, they may have become hard to remove. You can use a utility knife or razor blade to cut or split the line, then use a small screwdriver to peel the line off the carb or fuel tank. Be careful not to damage anything other than the old fuel line.
You will also need to replace the clamps with stainless steel worm clamps. The factory clamps cannot be reused. If you are unsure about the quality of your fuel lines, it is best to replace them. It is not a big project and will save you from potential issues down the line.
When choosing new fuel lines, you may want to opt for a coloured fuel line that is more resistant to gas and remains pliable in the cold. Tygon is a popular choice and comes in clear and yellow. You can also buy clear tubing from Princess Auto for a cheaper option, but the quality is uncertain. For the best quality, the original BRP line is recommended, though it is very expensive.
Using Vise Grips to Pinch Fuel Lines Safely
You may want to see also
Frequently asked questions
You can check if your Ski-Doo fuel line is on by looking at the fuel tank. If the fuel tank is full, the fuel line is on. If there is no fuel in the tank, the fuel line is off.
Leaving the fuel line on can be dangerous if the fuel tank is overfilled. This is because fuel expands as it warms up, so if the tank is full and left in a warm place, it could cause an over-spill. Ski-Doo snowmobiles have a safety airspace to allow for this expansion, but it is still best to avoid spillages.
Using the locking device on the fuel pump handle can cause fuel to be pushed out of the tank and spill. This is because it adds stress to the filler nozzle and neck of the gas tank. It is best to control the fuel filling with your hand directly and add fuel slowly.
There are a few signs that your fuel line may need replacing. If your Ski-Doo is running roughly and dying at idle, or you notice air bubbles in the main fuel line, this could indicate that your fuel line or carb is clogged and needs replacing.











































