Rajan Wilcox
The Husqvarna 128LD is a trimmer/edger that requires a fuel line with the part number 530069599. This fuel line is 25 in length and fits various Husqvarna models, including the 128LD, 128 C, 128 CD, 128 L, and others. It is important to verify the compatibility of the fuel line with your specific equipment's manual and serial number to ensure a seamless fit and optimal performance. Regular maintenance of the fuel system is crucial to prevent dirt and debris from clogging the carburetor, which can lead to hard starting and reduced power output.
Explore related products
What You'll Learn
The 25-inch Husqvarna 530069599 fuel line
The Husqvarna 530069599 is a 25-inch fuel line designed for use with the Husqvarna 128LD trimmer. It is a factory replacement fuel line that can be used to replace the existing return line in your line trimmer. The kit comes with two sizes of fuel tubing, with the smaller size being 0.08x0.14 inches, which is the size required for the 142's fuel line. The kit also includes two unions.
The fuel line is easy to replace, with the hardest part being fishing the line into the tank. It is recommended to draw a diagram of the fuel line routing before removing the old lines. The pointed end of the fuel line should be pushed into the hole of the tank and then pulled through.
The Husqvarna 530069599 fuel line is a genuine OEM part that fits various Husqvarna models, including the 128 C, 128 CD, 128 L, and 128 LD. It is designed to provide a seamless fit and top-notch performance for your equipment.
The product has received positive reviews from customers, who have found it easy to repair and a good value for money. It has been described as a great replacement hose that has helped get their equipment running like new again.
Fuel Line Placement: Blower's Guide to Fuel Line Installation
You may want to see also
Explore related products
Husqvarna 128LD fuel line kit
The Husqvarna 128LD Fuel Line Kit 530069599 is a genuine and top-quality product that fits the 128 C, 128 CD, 128 L, and 128 LD models, among others. This OEM-authorized part is designed to keep your equipment in top condition and protect it from damage. It is made to perform optimally and endure the demands of your Husqvarna trimmer.
The fuel line kit is available from several online retailers, including Husqvarna Parts, Amazon, and Lowe's. However, it is currently listed as no longer available on the Husqvarna Parts website.
If you are unsure whether this fuel line kit is suitable for your equipment, you can refer to the operator's manual for your Husqvarna 128LD model, which provides detailed information about installing and replacing parts. Additionally, you can contact the lawn mower customer service group for assistance.
It is important to note that regular fuel system maintenance is crucial to prevent dirt and debris from entering your carburetor. Clogged fuel filters can lead to hard starting and low power output. Therefore, it is recommended to use genuine OEM replacement parts, like the Husqvarna 128LD Fuel Line Kit, to ensure your outdoor power equipment maintains peak performance.
In addition to the fuel line kit, you can also find other related products, such as the Husqvarna 128LD tune-up kit, carburetor, air filter, and fuel filter, to keep your equipment in optimal condition.
Suzuki DR650 Fuel Line: Will 5/8 Inch Fit?
You may want to see also
Explore related products
Husqvarna 128LD fuel tank replacement
The Husqvarna 128LD is a trimmer/edger that uses a 25" fuel line. The OEM part number for the fuel line is 530069599. The fuel line kit is no longer available from the manufacturer, although some third-party vendors may still have stock.
If you are replacing the fuel line, it is recommended to get a fuel hose as close to the size of the original fuel line's diameter as possible. Push one end down the hole in the tank and keep pushing until you have a few inches inside the tank. Reach inside the tank with a hook-like tool and pull the end out through the fuel fill neck. Place a fuel filter in the line, then drop the hose and filter back into the tank. Finally, trim the fuel line to fit properly.
If you are replacing the entire fuel tank, you can purchase a replacement fuel tank assembly with the part number 545180870. The replacement process involves removing the wire and boot from the spark plug to prevent accidental engine ignition, then using a T-25 Torx bit to remove the screws securing the muffler cover. After detaching the cover, remove the screws to release the muffler shield, then unthread the screws securing the starter housing. Finally, detach the fuel tank from the housing, noting the orientation of the fuel lines, and detach them from the carburetor.
Husqvarna offers a warranty that covers defects in material or workmanship under normal use during the warranty period. During this time, they will repair or replace defective products or parts free of charge.
Best Places to Buy Submersible Fuel Line Hose
You may want to see also
Explore related products
Husqvarna 128LD carburetor
The Husqvarna 128LD is a trimmer/edger that uses a 25" fuel line. The OEM carburetor for this model is the 545081848 C1Q-W40A, which fits several other Husqvarna products, including the 128C, 128L, 128R, and 128RJ. This carburetor is available for purchase on Amazon and from Husqvarna Parts.
Some customers have reported that the carburetor works properly without any adjustments, while others have mentioned that it requires some tuning. The general consensus is that the carburetor is easy to tune, although some have found that additional adjustments are needed to run the engine wide open.
There are a variety of carburetor kits available for the Husqvarna 128LD, including the HUZTL 128LD Carburetor Air Filter Tool Fuel Line Filter Carb Tune Up Kit, the SIMPERAC 128LD Carburetor Kit, the Kuupo 128LD Carburetor Kit, the Hipa 128LD Carburetor Kit, and the Kizut 128CD Carburetor Kit. These kits are designed to replace the Zama C1Q-W40A carburetor and are available on Amazon.
In addition to the carburetor, there are several other replacement parts available for the Husqvarna 128LD, including the fuel line, fuel tank, fuel filter, adjustment tool, trigger assembly, coil replacement, and handle assembly.
Fuel Line Options: FADS Aircrafts and Their Fuel Systems
You may want to see also
Explore related products
Husqvarna 128LD fuel filter
The Husqvarna 128LD is a trimmer/edger that runs on gas. It is important to keep your trimmer's fuel system clean to protect the engine from damage. This can be achieved by using a fuel filter, which strains out foreign particles before they reach the carburetor.
Husqvarna offers a fuel line kit, with part number 530069599, that fits the 128LD model. This kit is a genuine Husqvarna product and is designed to fit seamlessly with your equipment. It is no longer available from the manufacturer, but you may be able to find it through third-party sellers or retailers.
The fuel line kit comes in a 25-inch length and fits various Husqvarna models, including the 128 C, 128 CD, 128 L, and 128 LD. It is recommended to cross-verify the part selection with your equipment manual and serial number to ensure a correct and seamless fit.
In addition to the fuel line kit, Husqvarna also offers a fuel filter specifically for their string trimmers. This fuel filter is made of plastic and metal and can be purchased from retailers like Lowe's. It is designed to maintain a cleaner fuel system, straining out foreign particles and protecting your machine's engine from potential damage.
By using genuine Husqvarna parts, you can ensure optimal performance and endurance for your 128LD trimmer.
A Car Fuel Line: What It Looks Like and Why
You may want to see also
Frequently asked questions
The part number for the Husqvarna 128LD fuel line is 530069599.
The length of the Husqvarna 128LD fuel line is 25 inches.
The Husqvarna 128LD fuel line is made of rubber.
The Husqvarna 128LD fuel line can be purchased from authorised dealers or online stores such as Amazon, Lowe's, and specialised websites like mypartsstore.com and husqvparts.com.
Husqvarna offers a warranty that covers defects in material or workmanship under normal use during the warranty period. The specific warranty period and details may vary by region, so it is recommended to refer to Husqvarna's website or contact their customer support for more information.
