Replacing The Fuel Rod In Your Starbase: A Step-By-Step Guide

In the Sci-Fi MMO game Starbase, fuel rods are essential for powering ships and other machinery. They contain exorium fuel, which is converted into power by generators. When a fuel rod is empty, it needs to be replaced, and this process involves several steps. Firstly, locate the fuel rod behind your seat, then find the replacement fuel rods at the back of your ship. Remove the old rod by pressing 'E' and discard it, then insert the new rod, ensuring it is aligned correctly by pressing 'C' to enable snapping. This guide will help players understand the process of replacing fuel rods in Starbase and ensure their ships can continue functioning.

How to Replace Fuel Rods in Starbase

Locate the fuel rod

To locate the fuel rod, start by identifying the seat of your ship. The fuel rod is located right behind it. The fuel rod is an essential component of the ship's generator, which converts exorium fuel into power. It is a container for the raw fuel that the fuel chamber processes to generate energy.

The fuel rod has a meter that indicates the quantity of stored fuel and the active drain. It must be snapped into place in the fuel chamber to function. Tier one (T1) fuel chambers use Nhurgite Fuel Rods, while tier two (T2) and tier three (T3) fuel chambers require Exorium Fuel Rods.

When replacing an empty fuel rod, you can find the replacement fuel rods at the back of your ship, in the wings. There are two on each side, giving you a total of four spare rods. If you expend all the spare rods, you will need to craft new ones.

It is important to note that the game does not currently provide clear directions to the different parts of your ship. However, the fuel rod is typically located right behind your seat.

Find replacement rods

To find replacement fuel rods for your ship in Starbase, you need to locate them. The replacement fuel rods are located at the back of your ship in the wings, with two on each side, giving you a total of four spare rods. Once you have located the replacement fuel rods, you can follow the steps to remove the old fuel rod and insert the new one.

If you have used up all four of the spare rods, you will need to craft new ones. The process of crafting new fuel rods is not yet implemented in the game, but it is mentioned as a future possibility. For now, the only feasible way to store and organise fuel rods is by using fuel rod racks, a special shelf designed for this purpose.

It is important to note that fuel rods are not the only way to generate electricity for your ship in Starbase. You can also use alternative methods such as solar panels to meet your power needs.

Additionally, the type of fuel rod required depends on the tier of your fuel chamber. Tier one (T1) fuel chambers require Nhurgite Fuel Rods, while tier two (T2) and tier three (T3) fuel chambers require Exorium Fuel Rods. Make sure you are using the correct type of fuel rod for your ship's fuel chamber.

Remove the old rod

To remove the old fuel rod, you must first locate it. In most ships, the fuel rod will be located right behind your seat. Once you have found it, press "E" with your crosshair above the rod to remove it from its container. This will allow you to take it out and dispose of it. Be sure to dispose of the old fuel rod responsibly, as it is considered dead weight once it is empty. Some players choose to leave their old fuel rods next to other people's ships as a gift, or turn them into ammo or armour plating.

If you are replacing the fuel rod, you will need to locate the replacement fuel rods. These can usually be found at the back of your ship in the wings, with two on each side, giving you a total of four spare rods. If you have used up all your spare rods, you will need to craft new ones. To do this, place the empty fuel rods into your inventory and craft a Generator Fuel Rod (Refill). Tier one (T1) fuel chambers require Nhurgite Fuel Rods, while tier two (T2) and tier three (T3) fuel chambers require Exorium Fuel Rods.

It is important to note that fuel rods are not the only way to generate electricity in Starbase. You can also use solar panels to power your ship. Additionally, crafting new fuel rods is not currently implemented in the game, so you will need to rely on your spare rods or purchase new ones until this feature becomes available.

Align the new rod

To align the new rod, you will need to press 'C' while holding it, which will enable snapping. This makes insertion much easier. The rod must be snapped into place in a fuel chamber to function. Once snapped into place, the new fuel rod will be inserted and ready to use.

The snapping function is an important feature to ensure the fuel rod is correctly aligned. Without it, the rod will not be secure and could potentially cause issues with the ship's power generation. It is a simple but crucial step in the process of replacing a fuel rod.

Additionally, it is worth noting that there are different types of fuel rods for different tiers of fuel chambers. Tier one (T1) fuel chambers require Nhurgite Fuel Rods, while tier two (T2) and tier three (T3) fuel chambers require Exorium Fuel Rods. Ensure you are using the correct type of fuel rod for your ship's fuel chamber.

The alignment and insertion of the new fuel rod are crucial steps in the process of replacing a fuel rod in Starbase. By following these steps, players can ensure their ship has the necessary power to function correctly.

Finally, it is worth mentioning that fuel rods can also be crafted. However, as of the time of writing, crafting is not yet implemented in the game. Players will need to obtain new fuel rods through other means, such as purchasing or finding them in-game.

Insert the new rod

To insert the new rod, you will need to first ensure that you have a replacement fuel rod. These can be found at the back of your ship, in the wings, with two on each side, giving a total of four spare rods. Once you have a new rod, you will need to align it correctly for insertion. Pressing 'C' while holding the rod will enable snapping, making insertion much easier. Then, simply slot the new rod into place.

It is important to note that fuel rods must be snapped into place in a fuel chamber to function. They provide generators with the exorium fuel required to produce power. The meter on the face of the fuel rod will indicate the quantity of stored fuel, as well as the active drain. Tier one (T1) fuel chambers require Nhurgite Fuel Rods, while tier two (T2) and tier three (T3) fuel chambers require Exorium Fuel Rods.

If you have used up all your replacement fuel rods, you will need to craft new ones. Unfortunately, refilling used fuel rods is not an option.

Frequently asked questions