Fuel Pump Replacement Guide For Dodge Charger Owners

If your Dodge Charger is experiencing starting issues, it could be time to replace the fuel pump. The fuel pump is responsible for delivering gas from the fuel tank to the fuel injectors, and when it fails, it can cause a loss of engine power or prevent the car from starting at all. In some cases, the car may run but lack power or keep stalling. While there is no specific replacement interval for fuel pumps, they do tend to fail more often as the mileage on the car increases. Repeatedly running the fuel tank low or driving with clogged fuel filters can also shorten the lifespan of a fuel pump.

When it comes to choosing a replacement fuel pump for your Dodge Charger, there are a variety of options available, including OEM and aftermarket parts. Replacement costs can vary depending on your location and the specific model of your Charger, but generally, you can expect to pay between $1,131 and $1,592 for the part and labour. It is recommended that you replace the fuel filters at the same time as the fuel pump to ensure optimal performance and prolong the life of the new pump.

Fuel pump replacement cost

The fuel pump is an important part of your Dodge Charger, delivering fuel to the engine. When it's working, it's a hardy piece of equipment, but sometimes it can fail and need to be replaced.

Signs of a Failing Fuel Pump

You may need to replace your fuel pump if you notice any of the following:

• Your engine is struggling to maintain speed
• Noises, backfires, and a sputtering engine
• Hesitation at start-off
• Your engine is overheating
• Your "Check Engine" light is on

The cost of replacing a fuel pump varies depending on the age and model of your Dodge Charger. The average national cost for a fuel pump replacement across all vehicles is between $611 and $894, including parts and labor. However, for a Dodge Charger, the cost is estimated to be between $1,131 and $1,592, with labor costs between $84 and $106, and parts priced between $1,048 and $1,486.

Where to Get a Fuel Pump Replacement

You can take your Dodge Charger to a local Dodge mechanic or dealership for a fuel pump replacement. Some places that offer fuel pump replacements for Dodge Chargers include:

• Safford Brown Chrysler Dodge Jeep Ram
• Dulles Chrysler Dodge Jeep Ram
• Criswell Chrysler Jeep Dodge Ram FIAT
• Tate Chrysler Jeep Dodge Frederick

You can also purchase a fuel pump from AutoZone and replace it yourself, although this is not recommended unless you are very experienced in auto repair due to the risk of fire.

Symptoms of a bad fuel pump

There are several symptoms of a bad fuel pump in a Dodge Charger that you should watch out for. Firstly, if your fuel pump is not functioning correctly, you may notice your engine sputtering at high speeds due to an inconsistent flow of fuel to the engine. Secondly, a sudden loss of power when accelerating is another common symptom. This is because a failing fuel pump might not be able to keep up with the engine's demands. Additionally, if your car is struggling to start or not starting at all, it could be due to a faulty fuel pump. A properly functioning fuel pump will make an audible buzzing sound as it primes the fuel lines, so if you don't hear this sound, it could indicate an issue.

Other signs of a bad fuel pump include a whining noise coming from the fuel tank area, stalling (often followed by the engine restarting after several minutes), and long cranking times before the engine starts. If you notice any of these issues, it's important to get your vehicle checked by a professional mechanic as soon as possible to prevent further damage and ensure safe driving conditions.

Fuel pump replacement safety

Working on the fuel system of your Dodge Charger can be dangerous, so it's important to take the necessary precautions to ensure your safety and protect your vehicle from potential damage. Here are some detailed instructions and safety guidelines to follow when replacing the fuel pump in your Dodge Charger:

Preparation:

• Disconnect the battery– Before starting any work on the fuel system, disconnect the negative battery terminal. This is crucial to prevent electrical shocks and accidental short circuits, which could lead to a fire. Keep the terminal away from the battery to avoid accidental reconnection.
• Work in a well-ventilated area– Ensure your workspace is adequately ventilated to avoid inhaling harmful fumes, especially if you're working in an enclosed garage. Working near open flames or sparks is not recommended when handling fuel.
• Use proper lighting– Adequate lighting is essential for spotting issues and performing repairs correctly. It ensures you don't miss any important details during the replacement process.
• Wear protective gear– Always wear protective gloves, safety goggles, and a respirator mask. This gear will protect you from debris, electrical sparks, and exposure to harmful chemicals during the replacement process.

Fuel Pump Replacement Process:

• Relieve fuel system pressure– Locate the fuel pump fuse or relay and remove it. Then, start the engine and let it run until it stalls to relieve pressure. This step is important to reduce the risk of fuel spraying when you disconnect the fuel lines.
• Access the fuel pump– Depending on your Dodge Charger model, you may need to remove the rear seat and set aside the sound-deadening foam to access the fuel pump flange cover. Take photos during disassembly to ensure proper reassembly.
• Disconnect fuel lines and electrical connectors– Carefully disconnect the fuel lines and electrical connectors attached to the fuel pump. This will allow you to remove the fuel pump flange and access the internal electrical connections.
• Remove the fuel pump assembly– Disconnect the fuel pipes attached to the fuel pump assembly and lift it out of the fuel tank. Place the new fuel pump into the tank.
• Reinstall and test– After installing the new fuel pump, reconnect the fuel lines, electrical connectors, and secure the fuel pump flange. Reinstall the access cover or rear seat. Reconnect the battery and start the engine to ensure the new pump works correctly. Check for fuel leaks before completing reassembly.

Additional Safety Tips:

• Handle fuel with care– Always exercise caution when handling fuel. Ensure there are no open flames or sparks nearby to prevent accidental fires.
• Have a fire extinguisher ready– Keep a fire extinguisher nearby as a safety precaution in case of accidental fires.
• Check electrical connections– Inspect the electrical connections to the fuel pump for any signs of damage or corrosion. Ensure all connectors are clean and securely attached. Use a multimeter to test voltage and continuity.
• Regular maintenance– Perform regular maintenance on your Dodge Charger's fuel system to prevent future fuel pump issues. This includes replacing the fuel filter at recommended intervals and using high-quality fuel system cleaners.
• Avoid driving on low fuel– Gasoline acts as a lubricant for the fuel pump. Running your vehicle on a low fuel level can cause the pump to run dry, leading to accelerated degradation. It's advisable to fill the tank when it reaches a level between a quarter and half full.

By following these safety guidelines and replacement steps, you can ensure a safe and effective fuel pump replacement in your Dodge Charger. Remember to prioritize your safety and that of those around you when working on your vehicle.

Fuel pump replacement process

The fuel pump is a crucial component of your car, delivering fuel from the tank to the fuel injectors. As such, a faulty fuel pump can cause a range of issues, from reduced fuel efficiency to engine stalling and even complete failure to start the car. Here is a step-by-step guide on how to replace a fuel pump in a Dodge Charger.

Step 1: Disconnect the Battery

Powering down the car is an essential safety measure to reduce the risk of fire when working with the fuel system. Disconnect the battery before proceeding with any other steps.

Step 2: Access the Fuel Pump

The fuel pump can be located either inside or outside the fuel tank. If it is inside the tank, you will need to remove an access cover to reach it. In some cases, you may need to drain the fuel before removing this access panel. If the pump is outside the tank, simply proceed to the next step.

Step 3: Remove and Replace the Fuel Pump

For an external fuel pump, disconnect the fuel lines and EVAP system hoses, as well as any electrical connections, to remove the pump. Then, install the new pump and reconnect all the hoses and electrical connections.

For an internal fuel pump, you may need to lower the fuel tank from the vehicle to access it. Once you have removed the old pump, attach any reusable brackets and pick-up screens to the new pump before installing it.

Step 4: Reassemble and Test

After installing the new fuel pump, refill the fuel tank and run the engine to test for leaks. It is also recommended to replace the fuel filter at the same time as the fuel pump to ensure optimal performance and longevity.

Step 5: Post-Replacement Checks

Even after a successful replacement, keep an eye out for any fuel leaks or odors. If you notice any issues, do not start the car or drive it. Instead, have the car towed to a repair shop for further inspection and repair.

The fuel pump replacement process for a Dodge Charger involves several steps and requires careful handling to prevent safety hazards. Unless you are very experienced in auto repair, it is advisable to leave this job to professional mechanics.

Fuel pump brands

When it comes to choosing a fuel pump for your Dodge Charger, there are several brands to consider. Here is an overview of some reputable fuel pump brands and their features:

TruGrade Fuel Pumps

TruGrade offers a range of fuel pumps compatible with the Dodge Charger, such as the TruGrade Fuel Pump D7048M, E8012S, and B1019MP. These fuel pumps are designed to improve fuel efficiency and enhance the performance of your vehicle. They are available at AutoZone and come with a limited-lifetime warranty.

Delphi Fuel Pump Module Assembly

Delphi is a well-known brand in the automotive industry and offers fuel pump module assemblies as direct replacements for the Dodge Charger. Their products meet OE (Original Equipment) standards and are designed to deliver correct fuel gauge readings. Delphi fuel pumps are known for their innovative design, durability, and lower failure rates. They are available at Advance Auto Parts and come with a limited-lifetime warranty.

Carquest Premium Fuel Pumps

Carquest Premium provides a range of fuel pumps and fuel pump module assemblies compatible with the Dodge Charger. Their products meet or exceed OE specifications and are engineered for superior performance and reliability. Carquest Premium fuel pumps feature upgraded turbine impellers and 100% carbon commutators, which improve fuel flow and extend the life expectancy of the pump. Their products are available at Advance Auto Parts and come with a limited warranty.

DENSO Original Equipment Quality Electric Fuel Pump

DENSO is a leader in fuel supply technology and offers original equipment-quality electric fuel pumps. Their fuel pumps are designed to meet DENSO's strict standards and deliver reliable performance. DENSO fuel pumps are known for their innovation and superior testing processes, ensuring that you receive a high-quality product.

Spectra Premium Fuel Pump Module

Spectra Premium is an original equipment supplier and offers fuel pump modules and assemblies that meet or exceed OE performance standards. Their fuel pumps undergo rigorous testing for voltage, amperage, resistance, pressure, and volume. Spectra Premium fuel pumps feature advanced engineering, precise fuel delivery, and accurate fuel gauge readings. Their products are available through various retailers and come with a limited warranty.

When choosing a fuel pump brand for your Dodge Charger, it is important to consider factors such as compatibility, performance, durability, and warranty. Always refer to the manufacturer's instructions and seek professional advice if needed.

Frequently asked questions