Ameer Randolph
The RCI 2162A is a 15-gallon fuel cell with a 0.100-inch thick aluminium tank. It does not come with a fuel pump included, but there are several options available for purchase separately, such as the Genright pump ring. The RCI 2162A is compatible with 93 octane unleaded premium and most other racing fuels. It has a sender ohm range of 0 ohms empty to 90 ohms full.
Explore related products
What You'll Learn
RCI 2162A fuel cell mount
The RCI 2162A is a 15-gallon aluminium fuel cell measuring 30" L x 12" W x 9" H. It is manufactured from 0.100 in. thick aluminium and is available in natural aluminium or powder-coated in red, blue, or black.
The RCI 2162A fuel cell can be purchased from several online retailers, including Summit Racing, Amazon, and JEGS. When purchasing the fuel cell, it is important to consider the necessary mounting kit and other accessories for proper installation and use.
One recommended mounting kit for the RCI 2162A fuel cell is the RCI 7513A, a 15-gallon aluminium fuel cell mount that fits 821-2162A fuel cells and is available from JEGS for $56.99. This mounting kit ensures a secure and proper fit for the fuel cell.
In addition to the mounting kit, there are several other accessories that may be required or recommended for the RCI 2162A fuel cell. These include:
- A funnel for easy fuel filling
- A fuel stabilizer to maintain fuel quality
- A utility jug for fuel storage and transport
- An octane boost additive to improve engine performance
It is important to note that some online reviews of the RCI 2162A fuel cell have mentioned issues with welding quality and rainwater leaks. It is recommended to pressure test the tank before installation and ensure that it is properly sheltered from the weather to prevent rainwater leaks and potential damage to the fuel system.
Aircraft Fuel Tanks: Venting System Explained
You may want to see also
Explore related products
Hose and fitting instructions
The RCI 2162A is a 15-gallon aluminium fuel cell with a length of 30.00", a width of 12.00", and a height of 9.00". It is manufactured from 0.100" thick aluminium and features a 12-bolt heavy-duty remote fill neck for use with a standard 1 3/4" hose.
To install the RCI 2162A fuel cell, follow these hose and fitting instructions:
First, drain and remove your existing fuel tank. Clean the inside of your new fuel cell thoroughly. Install the Genright ring onto the top of the fuel cell, welding it in place to eliminate the need for a gasket and reduce potential leaks. Position the ring as close to the centre of the tank as possible. If the ring does not remove the pre-attached fitting, you will need an additional FBM3741 to cap it off.
Next, install the fuel pump onto the Genright ring with the new gasket, ensuring the arrow on top of the pump assembly is pointing towards the front of the Jeep. Use sealant from the lube and sealant kit to install the FBM3741 = -8 AN Flare Cap onto the fitting in the fuel cell with the attached tube. Then, loosely install the FBM4033 = -8 90 Swivel hose end onto the other fitting on the top of the cell.
Cut the -8 SS braided hose to the required length to connect to the 90 fitting in the top of the fuel cell. Assemble the hose and fitting according to Aeroquip instructions. Now, assemble the fuel supply fittings:
- RUS-640850 = EFI to 6 AN fitting to an FBM1012 = 6 AN Hose end straight
- RUS-640860 = Fuel Rail to 6 AN fitting to the other FBM1012 = 6 AN Hose end straight
Connect the smaller fitting to the fuel pump and the larger fitting to the fuel line under the Jeep. Route your -6 SS hose under the Jeep, using a hole on the driver's side of the cell. Cut the -6 SS braided hose to the required length to connect to the fittings and assemble according to Aeroquip instructions.
Finally, extend the wiring as needed.
Seafoam Fuel Treatment: Does It Work?
You may want to see also
Explore related products
Extending wiring
When extending the wiring for the RCI 2162A fuel pump, it is important to follow the correct procedures to ensure a safe and effective installation. Here is a step-by-step guide to help you through the process:
Firstly, you will need to gather the necessary parts and tools. This includes the RCI 2162A fuel cell, a Genright pump ring with a new gasket, fuel-resistant rubber hose, hose clamps, and the appropriate fittings and connectors. You can refer to the list of parts provided by other RCI 2162A users for guidance on what specific parts you may need.
Next, remove the fuel pump from your old tank carefully, as it will still be full of fuel. Clean the inside of your new RCI 2162A fuel cell thoroughly before installing the fuel pump onto the Genright ring with the new gasket. Ensure that the arrow on top of the pump assembly is pointing towards the front of your Jeep.
Now, you can extend the wiring. Cut the SS braided hose to the required length to connect to the fitting in the top of the fuel cell. Assemble the hose and fitting according to the manufacturer's instructions. For example, Aeroquip provides instructions for assembling their SS braided hoses and fittings.
After assembling the hose and fitting, you can connect the smaller fitting to the fuel pump and the larger fitting to the fuel line under your Jeep. Route the SS hose under your vehicle, using a hole on the driver's side of the cell as an entry point. This hole can also be used to route the electrical wiring. Cut the SS braided hose to the appropriate length to connect to the fittings, and assemble them according to the manufacturer's instructions.
Finally, connect the grey evap valve back into the pump and secure it in the wheel well. With these steps completed, you should be able to start your Jeep without any issues.
It is important to note that this process may vary depending on your specific vehicle and setup. Always refer to the manufacturer's instructions and seek professional assistance if you are unsure about any part of the installation process.
Ford Fusion Fuel Tank: Size and Capacity Explored
You may want to see also
Explore related products
RCI 2162A fuel pump compatibility
The RCI 2162A is a 15-gallon aluminium fuel cell manufactured by RCI Racing. It is designed for high-performance racing applications and features a lightweight and strong construction made from 5052 aircraft-grade aluminium alloy. The cell is TIG welded and features a natural aluminium finish, although it can also be powder-coated in red, blue, or black.
While the RCI 2162A fuel cell does not come with a fuel pump included, it is compatible with a range of in-tank fuel pumps. The cell has a fuel pickup tube, and users are advised to use a pump that is powerful enough to pull a siphon. This means that a variety of different pumps can be used with the RCI 2162A, as long as they meet the specific flow rate and pressure requirements.
One important consideration when choosing a fuel pump for the RCI 2162A is the fuel type being used. The cell is compatible with 93 octane unleaded premium and most other racing fuels. However, it is important to ensure that the fuel pump is compatible with the specific type of fuel being used, as some pumps may not be suitable for all fuel types.
Another factor to consider when choosing an in-tank fuel pump for the RCI 2162A is the physical size and shape of the pump. The fuel cell has specific dimensions and features, such as the 12-bolt heavy-duty remote fill neck and the fuel pickup, return, and rollover vent, which may impact the compatibility of certain fuel pumps. It is important to ensure that the chosen pump fits properly within the cell and does not interfere with any of its features.
Overall, the RCI 2162A fuel cell is compatible with a wide range of in-tank fuel pumps, as long as they meet the specific flow rate, pressure, and fuel compatibility requirements, and physically fit within the cell without interfering with its features.
Draining Fuel Tank of Bobcat 773 Skid Loader: Step-by-Step Guide
You may want to see also
Explore related products
RCI 2162A fuel tank capacity
The RCI 2162A fuel tank has a capacity of 15 gallons. It measures 30 inches in length, 12 inches in width, and 9 inches in height. The tank is made from 0.100-inch-thick 5052 aircraft-grade aluminium alloy and is TIG welded. It features a 12-bolt heavy-duty remote fill neck for use with a standard 1 3/4 inch hose, a fuel pickup, return, rollover vent, and a sending unit. The sending unit has a sender Ohm range of 0 ohms empty to 90 ohms full.
The RCI 2162A fuel tank is designed for high-performance applications and is suitable for trucks. It is available in a natural aluminium colour or powder-coated in red, blue, or black. RCI has been manufacturing high-quality, affordable racing products for over 30 years, with a focus on safety.
While the RCI 2162A fuel tank has received some positive reviews for its performance and value, there have been some concerns about welding quality, with reports of fuel stains appearing on the tank after use, requiring additional welding work.
It is recommended that users pressure test the tank before installing it in their vehicle. The RCI 2162A fuel tank is compatible with 93 octane unleaded premium and most other racing fuels. It does not have a bladder but does feature a pickup tube. When selecting a fuel pump, ensure it is powerful enough to pull a siphon.
Propane Tanks Underground: Safe or Not?
You may want to see also
Frequently asked questions
The capacity of the RCI 2162A fuel cell is 15 gallons.
The RCI 2162A fuel cell is made of 0.100-inch thick aluminum.
The RCI 2162A fuel cell is compatible with 93 octane unleaded premium and most other racing fuels.
The RCI 2162A fuel cell has a length of 30 inches, a width of 12 inches, and a height of 9 inches.
The RCI 2162A fuel cell includes a sending unit and a billet aluminum cap for non-remote use.
