Replacing Fuel Tube In 2010 Ford Escape: Step-By-Step Guide

If you're looking to replace the fuel tube on your 2010 Ford Escape, you'll first need to locate the fuel filter. This can be found by following the fuel line—it's likely that the fuel tube is somewhere along this line. Once you've located the fuel tube, you can then proceed to replace it.

Fuel filler hose

The fuel filler hose is a vital part of the Ford Escape, responsible for feeding fuel into the tank. It is designed to be durable and to improve the injection of fuel, while also preventing leakage. The hose is connected to the fuel fill cap inlet via clamps and screws, ensuring a safe and secure connection.

When looking to replace the fuel filler hose on a 2010 Ford Escape, there are a few options available. It is important to note that the specific part required may vary depending on the engine type of your vehicle. Here are the steps to replace the fuel filler hose:

• Purchase the Correct Part: Ensure that you are buying the correct fuel filler hose for your vehicle. The part number for the 2010 Ford Escape fuel filler hose is 9L8Z-9034-B, which can be purchased from Ford or other automotive retailers.
• Prepare the Vehicle: Park the vehicle on a level surface, engage the parking brake, and ensure the engine is off and cooled down. You may also want to disconnect the negative battery terminal for safety.
• Access the Fuel Filler Hose: The fuel filler hose is located near the fuel tank. You may need to remove any components blocking access to the hose, such as the fuel filler neck or fuel tank. Be cautious when handling fuel system components.
• Disconnect the Old Hose: Carefully disconnect the clamps or screws securing the old fuel filler hose. You may need to loosen any hose clamps before completely detaching the hose. Be prepared to catch any residual fuel with a suitable container.
• Install the New Hose: Position the new fuel filler hose in place, ensuring it is properly aligned and seated correctly. Secure the hose using the appropriate clamps and screws, tightening them to the specified torque if necessary.
• Reassemble and Refill: Reinstall any components that were removed to access the fuel filler hose. Once everything is secured, refill the fuel tank and check for any signs of leakage around the new hose.

It is important to consult a qualified mechanic or a professional service center if you are uncomfortable or unfamiliar with this process. They will be able to guide you through the procedure and ensure a safe and proper installation.

Additionally, here are some part options for the 2010 Ford Escape fuel filler hose, along with their prices:

• TruGrade Fuel Tank Filler Neck FNA06: Check fit for your vehicle.
• Dorman Fuel Tank Filler Neck 577-877: Check fit and availability.
• Spectra Premium Fuel Tank Filler Neck FNA06: Check fit and availability.

Fuel filter

The fuel filter on a 2010 Ford Escape is not serviceable and is part of the fuel pump inside the fuel tank. Fuel filters are positioned in the line leading from the gas tank to the engine and prevent contaminants from getting inside the engine, which could lead to a loss in performance and potential damage to the cylinder lining.

Older cars may need their filters replaced as often as every two years and 30,000 miles, while newer vehicles could go as long as 50,000 miles before needing the filter changed. The average cost to change a vehicle's fuel filter is between $90 and $207.

If you are experiencing problems with starting your Ford Escape, stalling, excessive vibration while driving, or rough slow-speed cruising, you may need to replace your fuel filter.

Fuel pump

The fuel pump is responsible for delivering gas from the fuel tank to the fuel injectors. It is part of a full fuel pump assembly, which includes the sending unit and level arm. The pump delivers the right amount of fuel at a high enough pressure to keep the engine running smoothly.

Symptoms of a Faulty Fuel Pump

If your car engine is stuttering, surging, or experiencing reduced fuel efficiency, you may need to replace the fuel pump. Other signs include high-pitched noises, loss of engine power, and the check engine light coming on.

Safety Precautions

Working with the fuel system is dangerous, so it is important to take precautions to avoid starting a fire. Before beginning, disconnect the battery to reduce the risk.

Step-by-Step Guide

Step 1: Accessing the Fuel Pump

The first step is to locate the fuel pump, which can be found either inside or outside the fuel tank. For pumps inside the tank, remove the access cover. In some cases, you may need to drain the fuel before removing the access panel.

Step 2: Replacing the Fuel Pump

Once you have accessed the fuel pump, the next step is to disconnect the fuel lines and remove the pump. Install the new fuel pump and reconnect the fuel lines.

Step 3: Checking for Leaks

After installing the new fuel pump, it is important to check for any fuel leaks. Ensure that there are no fuel leaks or odors before starting the car.

When to Replace the Fuel Pump

Additional Tips

When replacing the fuel pump, it is recommended to also replace the fuel filters at the same time. This will ensure the fuel system is clean and functioning properly. Additionally, be aware that some 2010 Ford Escape models may have a fuel filler neck problem, which can cause issues when filling the tank with gas.

Fuel tank filler neck

The fuel tank filler neck is a component of the fuel delivery system in a car. To replace the fuel tank filler neck in a 2010 Ford Escape, you will need to purchase a new filler neck that is compatible with your vehicle. There are several options available, including:

• Spectra Premium Fuel Tank Filler Neck FNA06
• Spectra Premium Fuel Tank Filler Neck FN729
• Spectra Premium Fuel Tank Filler Neck FNH237
• Dorman Fuel Tank Filler Neck 577-877

Once you have purchased the correct part, follow these steps to replace the fuel tank filler neck:

• Park the car on a level surface and engage the parking brake.
• Remove the fuel tank cap to relieve any pressure in the fuel tank.
• Locate the fuel tank filler neck. It is usually located near the fuel tank and connected to the fuel filler tube.
• Disconnect the fuel filler tube from the fuel tank filler neck. This may require removing any clamps or hoses that secure the tube to the neck.
• Remove the fuel tank filler neck from the vehicle. This may involve removing any bolts or screws that secure it in place.
• Install the new fuel tank filler neck. Ensure that it is securely fastened in place and connected to the fuel filler tube.
• Reattach any hoses or clamps that you may have removed.
• Tighten all connections and clamps using a torque wrench to ensure they are secure.
• Reattach the fuel tank cap.

Note: It is important to work carefully and avoid any sparks or open flames when working with the fuel system, as gasoline is highly flammable.

Fuel tank lock ring

The fuel tank lock ring is an essential component of your Ford Escape's fuel system, ensuring a secure connection between the fuel pump assembly and the lock. When servicing the sending unit, it is recommended to replace the lock ring to maintain the integrity of the fuel system.

There are a variety of options available for the 2010 Ford Escape when it comes to fuel tank lock rings. It is important to select the correct lock ring that matches your vehicle's specific make and model. Here are some detailed instructions and considerations for replacing the fuel tank lock ring:

• Vehicle Compatibility: Ensure that the lock ring you choose is compatible with the 2010 Ford Escape. The part number 6R3Z-9C385-A is compatible with the 2006-2010 Ford Escape, including models with the 4 Cyl 2.3L, 4 Cyl 2.3L Hybrid Gas/Electric DOHC, 6 Cyl 3.0L DOHC EFI Modular, and 6 Cyl 3.0L OHC Duratec engines.
• Brand Options: Several reputable brands offer fuel tank lock rings for the Ford Escape. Motorcraft, Dorman, TruGrade, and Carquest Premium are among the top choices. Motorcraft is the only brand recommended by Ford Motor Company for Ford vehicles. Dorman products are known for their direct replacement fit and durable construction. TruGrade lock rings ensure a secure fit and reliable performance. Carquest Premium lock rings are precision-stamped and treated with a rust-proof finish.
• Installation: When installing the new fuel tank lock ring, follow the manufacturer's instructions carefully. Some lock rings may require specific torque specifications for proper installation. It is recommended to refer to a repair manual specific to your vehicle for detailed installation instructions and torque values.
• Safety: Exercise caution when working on the fuel system. Ensure the vehicle is parked in a well-ventilated area, and allow the engine to cool down before starting work. Always wear appropriate safety gear, including gloves and eye protection.
• Additional Components: When replacing the fuel tank lock ring, it is a good opportunity to inspect and replace other related components if necessary. This may include the fuel pump, fuel tank, fuel lines, or fuel injectors. Refer to the manufacturer's recommendations and service intervals for these components.
• Professional Assistance: If you are uncomfortable or unfamiliar with the process of replacing the fuel tank lock ring, consider seeking assistance from a qualified mechanic or automotive specialist. They will have the necessary tools and expertise to complete the job safely and effectively.

Remember to verify the compatibility of the fuel tank lock ring with your specific 2010 Ford Escape model before purchase and installation. Always refer to the vehicle's repair manual or seek professional guidance if you have any doubts about the procedure.

Frequently asked questions