
If you're experiencing issues with your 2009 Nissan Rogue, you may need to replace the fuel pump. The fuel pump is responsible for delivering gas from the fuel tank to the fuel injectors, and a failing pump can cause a loss of engine power or prevent the car from starting. While it is possible to replace the fuel pump yourself, it is recommended that you let a repair shop handle this job due to the risk of fire. The cost of replacing the fuel pump in a 2009 Nissan Rogue can range from $1,134 to $1,727, with labour costs estimated between $143 and $180, and parts priced between $1,156 and $1,250.
Characteristics | Values |
---|---|
Average cost for fuel pump replacement | $1,299 - $1,430 |
Labor costs | $143 - $180 |
Parts | $1,156 - $1,250 |
Shop/Dealer price for 2009 Nissan Rogue | $1,134 - $1,727 |
Fuel pump assembly reference numbers | E8856M, FG1147, P76755M, SP4061M, TU321 |
What You'll Learn
Disconnect the battery
Disconnecting the battery in your 2009 Nissan Rogue is a simple task, but it must be done right to avoid any safety hazards. Here is a detailed guide on how to do it:
Preparation:
- Put on insulated work gloves and safety goggles. Batteries contain corrosive agents and hold enough charge to deliver a deadly shock.
- Ensure you are in a well-ventilated area to prevent exposure to harmful gases.
- Turn off your car. Running vehicles can produce sparks that could ignite flammable agents.
- Gather zip ties or another form of restraint to keep the battery cables in place and prevent them from touching.
- Cover the positive cable end with a cloth once it is removed to avoid metal-to-metal contact.
- Remove any jewelry, including necklaces, watches, and bracelets, to prevent shocks if they touch the battery.
Steps to Disconnect the Battery:
- Locate the negative terminal. It will be marked by a black plastic cover or a minus sign and will be located on or near the post.
- Using a wrench or pliers, hold the bolt head of the negative terminal still.
- With another wrench or pair of pliers, remove the nut from the negative terminal.
- Pull off the negative cable and secure it away from the battery.
- Repeat the above step for the positive cable, ensuring that the two battery cables do not touch each other.
- If the battery is held by a securing bracket, use your pliers or wrench to remove the screws and bolts holding it in place.
- Lift the battery straight out of the bracket. It may weigh up to 40 pounds, so be prepared to handle this weight.
Now that you have disconnected and removed the battery, you can proceed with your repairs or replacement. Remember to exercise caution and follow safety protocols throughout the process.
Fuel and Air Filters: When to Replace for Performance
You may want to see also
Remove the access cover
To remove the access cover, you will need to locate the fuel pump, which is usually inside the fuel tank. First, disconnect the battery to reduce the chance of a fire—a crucial safety step.
Next, locate the access cover. This will be on the fuel tank, and you will need to remove it to access the fuel pump. Depending on your model, you may need to drain the fuel before removing the access cover. Once the cover is off, you will be able to see the fuel pump and the pre-pump filter screen.
If your fuel pump is outside the tank, the process is slightly different. You will need to disconnect the fuel lines before removing the pump. This will involve releasing the fuel line clips or clamps that hold the lines in place. Be cautious, as fuel may spill out.
Once the fuel lines are disconnected, carefully remove the pump. It may be held in place with bolts or brackets, so have the appropriate tools ready. With the pump removed, you can now access the internal components for inspection or replacement.
Replacing Fuel Pump in Chevy Sonic: Step-by-Step Guide
You may want to see also
Replace the pump and pre-pump filter screen
To replace the fuel pump and pre-pump filter screen in a 2009 Nissan Rogue, you'll first need to disconnect the battery to reduce the chance of a fire.
Next, you'll need to access the pump. If the pump is inside the fuel tank, you'll need to remove an access cover. In some cases, you may need to drain the fuel before removing the access panel. If there is no access panel, you'll need to drain the fuel tank and then lower the tank from the vehicle to access the pump.
Once you have access to the pump, you'll need to remove the fuel pump supply and return hoses, as well as the EVAP system hoses and electrical connections to the pump. With the hoses and connections removed, you can now replace the pump and pre-pump filter screen.
After installing the new pump, you'll need to re-establish all the hoses and electrical connections. Finally, add fuel to the tank and run the engine to test for leaks.
It's important to note that working with the fuel system can be dangerous, so take all necessary precautions to prevent fires.
The Transition From Wood to Coal: Why the Change?
You may want to see also
Check for fuel leaks
Checking for fuel leaks is an important step when replacing the fuel pump in a 2009 Nissan Rogue. Here is a detailed guide on how to do it:
Before starting the replacement process, disconnect the battery to reduce the risk of fire. This is a crucial safety precaution when working with the fuel system. Once the battery is disconnected, follow these steps to check for fuel leaks:
- Remove the access cover: If the fuel pump is located inside the fuel tank, there is usually an access cover that needs to be removed. In some cases, you may need to drain the fuel before removing this access panel.
- Inspect the fuel pump and surrounding area: With the access cover removed, carefully inspect the fuel pump and the surrounding area for any signs of leaks. Look for wet spots, drips, or puddles of fuel. Pay close attention to the fuel lines, connections, and the pump itself.
- Check hoses and connections: If you don't find any obvious leaks, proceed to check the fuel pump supply and return hoses, as well as the EVAP system hoses, and electrical connections. Ensure that all connections are secure and there are no cracks or damage to the hoses.
- Reassemble and test: Once you've inspected all the components and confirmed that there are no leaks, proceed with the fuel pump replacement. After installing the new fuel pump, add fuel to the tank and run the engine. This will allow you to test for any leaks that may have been introduced during the replacement process.
- Observe for leaks: With the engine running, carefully observe the fuel pump, fuel lines, and connections for any signs of leaks. Pay attention to any unusual smells or sounds that may indicate a leak.
- Post-replacement inspection: After the engine has been running for a while, turn it off and inspect the fuel pump and surrounding area again. Look for any signs of fuel leakage or wet spots that may have occurred during or after the engine was running.
Remember, working with the fuel system can be dangerous. If you notice any fuel leaks or odors, do not start or drive the car, and do not park inside a closed structure. Immediately have the car towed to a qualified mechanic or repair shop for further inspection and repair.
Exploring Fuel Pump Replacement in 05 Explorers
You may want to see also
Replace fuel filters at the same time
When replacing the fuel pump in your 2009 Nissan Rogue, it is recommended to replace the fuel filters at the same time. This is because fuel filters can become clogged over time, which can put additional strain on the fuel pump and shorten its lifespan.
The fuel filter plays an important role in your car's engine, filtering the fuel that the fuel pump pumps. If the fuel filter becomes clogged, it can restrict the flow of fuel to the engine, leading to performance issues. Symptoms of a clogged fuel filter include difficulty starting the engine, stalling, excessive vibration while driving, and rough slow-speed cruising.
The fuel filter is located in the line leading from the gas tank to the engine. For most vehicles, this is inside the top of the fuel tank, where it connects with the fuel line. However, on some cars, it may be located elsewhere along the fuel line.
The recommended interval for replacing the fuel filter varies depending on the age of the car and other factors. Older cars may need their filters replaced as frequently as every two years or 30,000 miles, while newer vehicles can go up to 50,000 miles or five years before requiring a replacement. It is always a good idea to refer to the owner's manual for specific recommendations for your vehicle.
The cost of replacing a fuel filter varies, but it is generally an inexpensive and straightforward repair. The average cost nationwide to change a vehicle's fuel filter is between $90 and $207, including parts and labor.
Replacing the Fuel Screen on a 1996 Fourtra: Step-by-Step Guide
You may want to see also
Frequently asked questions
The cost to replace a fuel pump in a 2009 Nissan Rogue is between $1,134.26 and $1,727.51. This includes parts and labor.
No, it is not recommended that you replace the fuel pump yourself due to the risk of fire. It is best to leave this job to a professional mechanic.
Fuel pumps do not have a specific replacement interval. However, replacement becomes more common as the mileage on the car increases.
Symptoms of a bad fuel pump include leaking, unusual noises, loss of engine power, and an illuminated check engine light.
The fuel pump delivers gas from the fuel tank to the fuel injectors. It is powered by an electric motor and can be located inside or outside the fuel tank.