Sylvie Willis
Pingel manufactures high-performance parts for motorcycles, including the Pingel In-Line Fuel Filter. This product is made of billet aluminium and features a cleanable bronze element that will last a lifetime. The filter can be cleaned in solvent or gas. It is designed to meet the high flow requirements of the Pingel Power-Flo fuel valves.
Characteristics and Values of Pingel Fuel Filter
| Characteristics | Values |
|---|---|
| Construction | High-quality construction found in Pingel® petcocks |
| Main Body | Machined from billet aluminum |
| Length | 1-1/8” |
| Ports | Large, high-flowing |
| Filter Element | Cleanable bronze, lasting a lifetime |
| Filter Compatibility | Pingel® Power-Flo™ fuel valves |
| Performance | High-performance, flowing up to 51 ounces per minute |
| Seal | Leak-proof Viton O-ring |
| Element Design | Stainless steel, filtering down to 40 microns without restricting fuel flow |
| Reusable | Yes, cleanable with solvent or gas |
| Hose Compatibility | 3/8" hose |
| Fuel Line | Fits 5/16" ID fuel line |
| Warranty | Product warranty available |
Explore related products
What You'll Learn
Clean in solvent or gas
The Pingel In-Line Fuel Filter is a high-performance, reusable filter that can be cleaned in solvent or gas. Here is a step-by-step guide on how to clean it:
First, locate the filter in your vehicle. The Pingel In-Line Fuel Filter is typically about 1-1/8" long and fits a 5/16" fuel line. It is designed for high-volume gas valves and has a unique stainless steel element that filters down to 40 microns without restricting fuel flow.
Next, remove the filter carefully. You can then proceed to clean it using a solvent or gas solution. Ensure you are wearing proper protection, such as gloves and eye protection, before handling any chemicals. Refer to the solvent manufacturer's instructions for specific guidelines on safe usage and disposal.
Completely submerge the filter in the solvent or gas solution, ensuring that all parts are adequately covered. Use a container large enough to allow for this. You may need to gently agitate the filter or use a soft brush to dislodge any built-up debris.
After cleaning, carefully rinse the filter with clean solvent or gas to remove any remaining debris or residue. Ensure the filter is completely dry before reinstalling it. You can use a soft, dry cloth to wipe down the filter and absorb any remaining moisture.
Finally, reinstall the filter securely, ensuring all connections are properly sealed and there are no leaks. Refer to the Pingel In-Line Fuel Filter manual or a mechanic for guidance on proper installation techniques.
By following these steps, you can effectively clean your Pingel In-Line Fuel Filter using a solvent or gas solution, ensuring its longevity and maintaining optimal performance.
Locating and Checking Fuel Filters on Poulan Chainsaws
You may want to see also
Explore related products
$9.49 $9.99
O-ring seal maintenance
The Pingel Inline Fuel Filter SS1P is a high-performance filter with a unique stainless steel element design and a leak-proof Viton O-ring seal. The O-ring, in this case, is a critical component that prevents leaks and ensures the smooth running of the filter. Here are some essential maintenance tips for the O-ring seal:
Routine Inspection:
Over time, O-rings can become brittle and unreliable seals. Regular inspection of the O-ring is crucial to prevent leaks or premature failures. Look out for any signs of degradation, such as cracks, stains, discolouration, swelling, shrinkage, or changes in hardness. If the O-ring is exposed to harsh chemicals, accumulated solids, or harsh environmental conditions, it should be inspected more frequently.
Proper Lubrication:
Lubrication plays a vital role in maintaining the flexibility of the O-ring and preventing friction damage. Choose a suitable lubricant that is compatible with the O-ring material and apply it evenly, avoiding over-lubrication. Over-lubrication can attract dirt and debris, compromising the seal's effectiveness.
Cleaning and Disinfecting:
Regular cleaning of the O-ring is essential to prevent contamination and maintain optimal performance. Follow the manufacturer's recommendations for cleaning procedures and use only mild detergents or approved cleaning agents. Ensure that the O-ring is thoroughly dried before reinstallation.
Replacement:
Even with proper maintenance, O-rings have a finite lifespan and will eventually need to be replaced. Keep track of the manufacturer's recommended replacement schedule to avoid unexpected failures. If the O-ring shows signs of contamination, cracks, or corrosion, replace it immediately to prevent further issues.
Compatibility:
When replacing the O-ring, ensure that the new O-ring is compatible with the application's chemical environment. Select a suitable material that can withstand the specific chemicals used in the system. Incompatible chemicals can damage the O-ring, leading to leaks and reduced performance.
By following these maintenance guidelines, you can prolong the lifespan of the O-ring seal in the Pingel Inline Fuel Filter, ensuring its reliability and optimal performance.
Cleaning Your 05 Altima Fuel Pump Filter: Step-by-Step Guide
You may want to see also
Explore related products
Filter element replacement
The Pingel In-Line Fuel Filter is a high-performance filter that can flow up to 51 ounces per minute. It features a unique stainless steel design with a 40-micron filter element that won't restrict fuel flow. The filter element can be cleaned in solvent or gas, making it reusable.
To replace the filter element, first, remove the old element by unscrewing it from the filter body. Clean the area with a solvent or gas to remove any dirt or debris. Take a new filter element and screw it into the filter body by hand until it is tight. Do not overtighten, as this may damage the seal.
The Pingel In-Line Fuel Filter has a unique design with a high-flowing port and a cleanable bronze element that will last a lifetime. The filter body is machined from billet aluminum and has a length of 1-1/8 inches. It is designed to meet the high flow requirements of the Pingel Power-Flo fuel valves.
The replacement filter element part number is 720-809. It is important to ensure that the correct replacement element is used to maintain the performance and longevity of the filter. The filter element should be replaced when it becomes visibly dirty or when the fuel flow rate decreases, indicating that it is clogged.
It is important to note that the Pingel In-Line Fuel Filter is not legal for sale or use in California or on any EPA pollution-controlled motor vehicle.
Cleaning Fuel Filter Carburetor: DIY Guide
You may want to see also
Explore related products
Compatibility with fuel valves
The Pingel In-Line Super Short Fuel Filter is designed to meet the high flow requirements of the Pingel Power-Flo fuel valves. This product features a main body machined from billet aluminium, large high-flowing ports, and a cleanable bronze element. The filter is approximately 1-1/8" long and fits a 5/16" ID fuel line. It is not legal for sale or use in California or on any EPA pollution-controlled motor vehicle.
The Pingel In-Line Fuel Filter is a high-performance filter that flows up to 51 ounces per minute. It features a leak-proof Viton O-ring seal and a unique stainless steel element design, filtering down to 40 microns. This product is also available in a machined satin finish.
The compatibility of the Pingel fuel filter with fuel valves is important to ensure the proper functioning of the fuel system. The Pingel Power-Flo fuel valves require a fuel filter that can handle high flow rates, and the Pingel In-Line Fuel Filter is designed to meet these requirements.
It's important to note that the Pingel In-Line Fuel Filter is not legal for sale or use on all vehicles. As mentioned earlier, it cannot be sold or used in California or on any EPA pollution-controlled motor vehicle. This is due to the state's strict emissions laws and regulations. Therefore, it is essential to check the local laws and regulations before purchasing and using this product.
Cleaning Your 50cc Fuel Filter: Step-by-Step Guide
You may want to see also
Explore related products
Flow rate and capacity
Pingel fuel filters are designed to meet the high flow rate requirements of Pingel Power-Flo fuel valves and modern high-flow carburetors. The Pingel In-Line Super Short fuel filter, for example, has a flow rate of up to 51 ounces per minute and is designed for high-flow applications. This high flow rate is facilitated by its large, high-flowing ports and its unique stainless steel element design, which filters down to 40 microns. The filter's main body is machined from billet aluminum and has a length of only 1-1/8 inches, making it a compact and efficient solution for fuel filtration.
The Pingel fuel filter's flow rate of 51 ounces per minute (approximately 1.5 litres per minute) is impressive and ensures a consistent and abundant fuel supply to the engine. This high flow rate is essential for high-performance engines, especially those with large displacement or high-rpm capabilities, as it guarantees that the engine receives the necessary amount of fuel for optimal combustion.
The capacity of the Pingel fuel filter refers to the volume of fuel it can effectively filter before requiring maintenance or replacement. While the exact capacity may depend on various factors such as fuel quality and engine usage, the Pingel fuel filter's cleanable bronze element is designed to last a lifetime. This means that, with proper maintenance and cleaning, the Pingel fuel filter can provide long-term filtration performance without the need for frequent replacements.
The combination of a high flow rate and a durable, cleanable element makes the Pingel fuel filter a reliable choice for motorcycle enthusiasts and high-performance engine applications. Its ability to meet the high flow requirements of modern fuel valves and carburetors ensures uninterrupted fuel delivery, contributing to optimal engine performance. However, it is important to note that the actual flow rate and capacity experienced may vary depending on specific engine configurations and operating conditions.
In summary, the Pingel fuel filter's flow rate and capacity are designed to meet the demands of high-performance engines. With a flow rate of up to 51 ounces per minute and a cleanable bronze element built to last, the Pingel fuel filter ensures a consistent and abundant fuel supply while reducing the need for frequent replacements. This makes it a preferred choice for motorcycle enthusiasts and those seeking reliable and efficient fuel filtration solutions.
Charging Fuel Filter: 2002 Chevy Tracker Guide
You may want to see also
Frequently asked questions
The Pingel Inline Fuel Filter is a high-performance fuel filter that can flow up to 51 ounces per minute. It features a leak-proof Viton O-ring seal and a unique stainless steel element design that filters down to 40 microns without restricting fuel flow.
The Pingel Inline Fuel Filter can be cleaned by soaking it in a solvent or gas.
It is recommended to clean the Pingel Inline Fuel Filter regularly to maintain optimal performance. The frequency of cleaning depends on the usage and operating conditions.
Yes, it is important to ensure that the fuel filter is completely dry before reusing it. It is also recommended to inspect the O-ring seal for any damage and replace it if necessary.
