Changing The Fuel Filter In Your Honda Ruckus

Honda Ruckus scooters are known for their performance and easy maintenance. One such maintenance task is changing the fuel filter, which can be done at home with a few simple tools. This process involves removing the seat frame, front plastic cover, and floorboard to access the fuel filter behind the gas tank. The black plastic cover shielding the fuel filter can then be opened by pulling on it, and the old filter can be replaced by yanking off the hoses and plugging in a new one. Regularly changing the fuel filter, along with the oil and spark plug, is one of the cheapest ways to maintain the scooter's performance and keep it running smoothly.

Remove the seat frame, front plastic cover and floorboard

To remove the seat frame, front plastic cover, and floorboard of your Honda Ruckus scooter, follow these steps:

Begin by locating the seat frame bolts—there should be six of them. Use the appropriate tool to loosen and remove these bolts, taking care not to misplace them, as you will need to put them back during reassembly. With the bolts removed, the seat frame should come off easily. Set it aside in a safe place.

Next, focus on the front plastic cover. This is also secured by six screws. Remove these screws and set them aside, then carefully take off the front plastic cover. Place it in a safe location as well.

Now, you need to remove the floorboard. This is attached with eight bolts and two screws. Remove all the bolts and screws, then carefully lift and remove the floorboard. Ensure you keep these fasteners organized, as you will need them later when putting everything back together.

With these steps completed, you will have successfully removed the seat frame, front plastic cover, and floorboard of your Honda Ruckus scooter, and you will be able to access the fuel filter, which is located right behind the gas tank.

Locate the fuel filter behind the gas tank

To locate the fuel filter behind the gas tank of your Honda Ruckus scooter, you will first need to remove the floorboard (8 bolts and 2 screws). Before doing that, however, you must remove the seat frame (6 bolts) and the front plastic cover (6 screws). With all those parts removed, the fuel filter is located right behind the gas tank. There is a black plastic cover that shields the fuel filter, which can be opened by pulling on it.

Remove the black plastic cover

To remove the black plastic cover, you will first need to remove the seat frame using the 6 bolts that attach it to the scooter. Once the seat frame has been removed, you can then move on to removing the front plastic cover. This will require a screwdriver to take out the 6 screws holding it in place. With the seat frame and front plastic cover out of the way, you will now have access to the black plastic cover that shields the fuel filter. This cover will click open when pulled, so simply give it a firm tug and it should come right off, granting you access to the fuel filter.

Yank the hoses off the old filter

To access the fuel filter of your Honda Ruckus, you need to first remove the floorboard (8 bolts and 2 screws), the seat frame (6 bolts), and the front plastic cover (6 screws). Once you've removed all these, you'll find the fuel filter right behind the gas tank. There's a black plastic cover shielding the fuel filter—it will click open if you pull on it.

Now, to yank the hoses off the old filter, you'll need to pull them off with some force. They should come off with a firm tug. Be sure to pull them off each end of the old filter. After you've removed the hoses, simply toss the old filter.

It's important to be gentle but firm when yanking the hoses off to avoid damaging any other components. You don't want to accidentally break something else and create more work for yourself. Once the hoses are off, you're one step closer to installing the new fuel filter.

If you're unsure about the process, it might be helpful to refer to a diagram of the fuel filter and its surrounding parts. You can find one by going to www.RonAyers.com, clicking on 'OEM Parts', then 'Online Microfiche', then selecting 'Honda' and then 'NPS50'. Choose the 2005 NPS50, and from the list of different areas of the Ruckus, click on the 'Fuel Tank' section. To make it easier to find the sections you're looking for, click on 'View As Thumbnails' at the top of the page.

Plug in the new filter and reassemble

Now that you've accessed the fuel filter, it's time to plug in the new one and reassemble everything. Start by clicking open the black plastic cover that shields the fuel filter. You can then yank the hoses off each end of the old filter. Be sure to plug the new filter in and then reassemble everything in the reverse order of disassembly.

First, put the black plastic cover back in place, ensuring it's securely closed. Next, replace the gas tank and secure it with the bolts and screws you removed earlier. Then, move on to reinstalling the front plastic cover, seat frame, and floorboard. Make sure all the screws and bolts are tightened securely.

Once you've reassembled everything, take a moment to inspect your work. Check that all the hoses are connected securely and that there are no leaks. Give the area a once-over to ensure no tools or loose parts were left behind.

Finally, you can start up your Honda Ruckus and take it for a test drive to ensure it's running smoothly. Enjoy your refreshed ride!

Frequently asked questions