Replacing Fuel Pump In Honda Ridgeline: Step-By-Step Guide

The fuel pump in a Honda Ridgeline is designed to deliver an immediate and uninterrupted flow of fuel to the engine's fuel rail and injectors. A failing fuel pump will not create enough pressure in the fuel system, possibly causing a loss of engine power or preventing the car from starting. If you're experiencing issues with your Honda Ridgeline fuel pump, it may be time to consider replacing it. This can be done at home or by a professional mechanic. The cost of replacement varies depending on your location and the year of your Honda Ridgeline, but it typically ranges from $547 to $1,530.

Disconnect the battery

Disconnecting the battery is the first step in replacing the fuel pump in a Honda Ridgeline. This is a crucial safety precaution to reduce the chance of a fire.

Before beginning, ensure you have the necessary tools and safety equipment, including gloves and eye protection. Identify the battery and battery terminals. The battery is typically located in the engine bay, near the front of the vehicle. It is a rectangular unit with two terminals, one positive (+) and one negative (-).

The next step is to carefully disconnect the battery terminals. Start by loosening the negative terminal, using the appropriate size wrench or socket. Once loose, detach the cable from the terminal. Ensure that the cable does not touch any metal parts of the vehicle, as this could cause a short circuit. Then, repeat the process for the positive terminal. The battery is now disconnected.

After completing this step, you can proceed to the next steps of replacing the fuel pump, which may include removing an access cover to reach the pump or draining fuel before accessing the pump.

Remove the fuel pump access cover

To remove the fuel pump access cover of your Honda Ridgeline, you will first need to disconnect the battery to reduce the chance of a fire.

Next, locate the rear seats of your car and fold them up. Underneath the rear seats, you will find some panels that need to be removed. Once these panels are removed, you will see the silver access panel for the fuel pump.

Now, you can remove the seats to fully expose the fuel pump access cover. It is located on the driver's side of the centre.

With the seats out of the way, you will have clear access to the fuel pump assembly, which is a complete drop-in unit.

Disconnect the fuel pump supply and return hoses

Disconnecting the fuel pump supply and return hoses is a crucial step in changing the fuel pump in a Honda Ridgeline. Here is a detailed, step-by-step guide on how to do this:

First and foremost, it is imperative to prioritize safety. Ensure that you are wearing appropriate protective gear, such as gloves and eye protection, to safeguard against any fuel spillage or debris. Additionally, it is highly recommended to perform this task in a well-ventilated area to mitigate the risk of inhaling fumes.

Now, let's begin the process:

• Locate the fuel pump: The fuel pump is situated within the vehicle's fuel tank. To access it, you will need to remove the rear seats and fold up the carpet. There should be an access panel on the driver's side of the center, which you can remove to gain visibility and access to the fuel pump.
• Identify the supply and return hoses: The fuel pump supply hose is responsible for delivering fuel from the tank to the engine, while the return hose circulates excess fuel back to the tank. These hoses should be clearly visible once you have accessed the fuel pump.
• Prepare for fuel pump removal: Before disconnecting the hoses, it is crucial to relieve the fuel system pressure. Refer to your Honda Ridgeline's repair manual for specific instructions on how to safely relieve the pressure. Additionally, place a container underneath the hoses to catch any spilled fuel.
• Disconnect the supply hose: Using appropriate tools, carefully loosen the clamp that secures the supply hose to the fuel pump. Gently pull the hose away from the pump, ensuring that you don't damage the hose or the surrounding components. Allow the fuel to drain into the container.
• Disconnect the return hose: Similarly, loosen the clamp securing the return hose to the fuel pump and carefully remove it. Again, be cautious to avoid any damage and allow the excess fuel to drain.
• Clean the area: With the hoses disconnected, take the opportunity to clean the area around the fuel pump. Use a suitable absorbent material to wipe up any spilled fuel and ensure that the area is free of debris.
• Prepare for new fuel pump installation: Once the supply and return hoses are disconnected, you can proceed with the removal of the old fuel pump and the installation of the new one. Refer to the repair manual for specific instructions on how to install the new fuel pump, ensuring that all connections are secure and proper.

Remember, working with the fuel system can be hazardous, so take all necessary precautions. If you are uncomfortable or unsure about any part of the process, it is always best to consult a professional mechanic or seek assistance from a qualified individual.

Remove and replace the fuel pump

To remove and replace the fuel pump in a Honda Ridgeline, follow these steps:

First, disconnect the battery to reduce the chance of a fire. This is an important safety precaution. Next, locate the access cover for the fuel pump. If the pump is inside the fuel tank, you may need to drain the fuel before removing the access panel. Remove the access cover and locate the fuel pump. Disconnect the fuel pump supply and return hoses, EVAP system hoses, and electrical connections to the pump. Remove the pump from the tank.

Now it's time to install the new fuel pump. Attach any reusable brackets and pick-up screens to the new pump. Place the new pump into the tank and reconnect all the hoses and electrical connections. Ensure that all connections are secure and tight.

Once the new pump is installed, add fuel to the tank and run the engine to test for leaks. Check for any fuel leaks or odors. If you notice any leaks or smell gasoline, do not start the car and do not park inside a covered structure. Have the car towed to a mechanic for further inspection and repair.

Additionally, unless the fuel filter was replaced recently, it is recommended to install a new fuel filter when replacing the fuel pump.

Reattach the hoses and test for leaks

Once the new fuel pump has been installed, the next step is to reattach the hoses and test for leaks. This is a critical step, as fuel leaks can be dangerous and cause damage to the vehicle.

First, reconnect the fuel pump supply and return hoses, as well as the EVAP system hoses, and any electrical connections to the pump. Ensure that all connections are secure and tight.

Next, add fuel to the tank. It is recommended to keep the gas tank at least a quarter full to maximize the life of the new fuel pump.

Finally, run the engine and carefully check for any signs of fuel leaks. Look for wet spots, drips, or the smell of gasoline. If any leaks are detected, they must be addressed immediately. Do not start or drive the vehicle if there is a fuel leak, and do not park the vehicle inside or under a covered structure. Instead, have the car towed to a qualified mechanic for further inspection and repair.

Frequently asked questions