Replacing Fuel Pump In 2007 Nissan Murano: Step-By-Step Guide

If you're experiencing issues with your 2007 Nissan Murano, you may need to replace the fuel pump. The fuel pump is responsible for delivering fuel from the tank to the fuel injectors, and problems with this can cause a loss of engine power or even prevent the car from starting. While it is possible to replace the fuel pump yourself, it is not recommended due to the risk of fire. Instead, it is best to take your car to a repair shop or service centre to have it replaced by a professional. The cost of a fuel pump replacement for a Nissan Murano is estimated to be between $1,031 and $1,175, including parts and labour.

Disconnect the battery

Disconnecting the battery is the first step when replacing the fuel pump on a 2007 Nissan Murano. This is a safety measure to reduce the chance of a fire occurring during the procedure.

To begin, locate the battery in the engine bay of your Nissan Murano. It is typically located in the front of the engine bay, near the fender or firewall. Once you have identified the battery, proceed to the next step.

Before you disconnect the battery, ensure that you have the necessary tools for the job. You will need a basic set of hand tools, including a wrench or socket set that fits the battery terminals. It is also recommended to have a pair of safety gloves and eye protection for added safety.

Now, carefully loosen the nut on the negative battery terminal, which is usually marked with a "-" symbol. Use your wrench or socket to loosen it, but do not remove it completely yet. The cable should be loosened enough to be able to move it away from the terminal. Once it is loose, carefully move the cable away from the terminal, ensuring that it does not touch any metal parts of the car.

Finally, you can proceed to remove the nut and cable from the positive terminal, marked with a "+" symbol. Again, loosen the nut with your wrench or socket, and then move the cable away from the terminal. Ensure that the cable does not touch any metal parts of the car. With both cables now disconnected, you have successfully disconnected the battery in your 2007 Nissan Murano.

Remove the fuel tank access cover

To remove the fuel tank access cover, you will first need to disconnect the battery to reduce the chance of a fire. This is an important safety precaution when working with the fuel system. Next, locate the fuel tank access cover. This is usually found on the top or side of the fuel tank.

Once you have located the access cover, you will need to remove any screws or bolts holding it in place. Place these in a safe location, as you will need them again when reinstalling the cover. You may also need to disconnect any wiring harnesses or fuel lines connected to the cover. Be sure to do this carefully and label any connections to make reinstallation easier.

With the screws removed, you should now be able to carefully lift and remove the access cover. Place it somewhere safe and clean, ensuring that no debris falls into the opening and that you are still taking precautions against fire. You may now access the fuel pump for replacement.

Replace the pump and pre-pump filter screen

To replace the fuel pump and pre-pump filter screen on a 2007 Nissan Murano, you'll first need to disconnect the battery to reduce the chance of a fire. Next, locate the fuel tank and remove it from the vehicle. This may involve using a jack to support the tank while you lower it. With the tank accessible, you'll need to disconnect the fuel lines and remove the old pump. Before doing so, take note of the fuel line connections and wiring.

Once the old pump is out, you can install the new one. Reattach the fuel lines and lift the fuel tank back into place, securing it with the retaining strap. Reconnect the filler tube hose and the electrical connector. Finally, reconnect the battery and fill the tank with gas. You should then conduct a road test to confirm that the repair has been successful.

Note that fuel pumps come in a variety of shapes and sizes, so it's important to verify that you have the correct part for your vehicle. Consult your vehicle's service manual or online tutorials for specific guidance on replacing the fuel pump in a 2007 Nissan Murano.

Reconnect the fuel lines

To reconnect the fuel lines of your 2007 Nissan Murano, follow these steps:

First, ensure that the fuel lines are properly aligned and secured. Check that the connections are tight and there is no leakage. You can do this by carefully inspecting the connections and gently trying to move the lines to ensure they are firmly attached.

Next, if your vehicle has quick-connect fittings, make sure the lines are locked in place. You can use a pair of pliers to gently squeeze the connector and ensure it is fully engaged.

Now, check the condition of the fuel hoses. Inspect them for any cracks, leaks, or signs of deterioration. If they appear damaged or worn, it is recommended to replace them. Fuel hoses are crucial for maintaining fuel pressure and ensuring the engine receives the correct amount of fuel.

After ensuring the fuel lines and hoses are in good condition and properly connected, you can move on to the next step. Reconnect the fuel pump electrical connector. This is usually located near the fuel tank and should be plugged back into the fuel pump. Ensure it is securely connected.

Finally, before starting the engine, check the area around the fuel lines and pump for any signs of leakage. Make sure there are no fuel odours present. If everything appears secure and there are no signs of leakage, you can start the engine and check for proper operation.

If you are uncomfortable or unfamiliar with any of these steps, it is recommended to consult a professional mechanic or seek advice from a trusted auto repair resource. Working with the fuel system can be dangerous, so taking all necessary precautions is essential.

Check for fuel leaks

Once you have replaced the fuel pump in your 2007 Nissan Murano, you will need to check for fuel leaks. This is an important step to ensure that the fuel pump has been installed correctly and that there are no safety hazards. Here is a step-by-step guide on how to check for fuel leaks:

Step 1: Locate the Fuel Lines

The first step is to locate the fuel lines in your Nissan Murano. The fuel lines are the hoses that connect the fuel pump to the engine. They are usually located near the fuel tank, which is typically found at the rear of the vehicle.

Step 2: Inspect the Fuel Lines and Connections

Once you have located the fuel lines, carefully inspect them for any signs of damage or wear. Check for cracks, holes, or any other abnormalities that could indicate a leak. Also, check the connections between the fuel lines and the fuel pump to ensure that they are secure and tight.

Step 3: Use a Soap Solution

To thoroughly check for leaks, you can use a soap solution. Mix a small amount of dish soap with water in a spray bottle. Spray the soap solution onto the fuel lines and connections. If there are any leaks, the soap solution will start to bubble or foam.

Step 4: Check the Fuel Injectors

The fuel injectors are the components that deliver fuel to the engine. They are usually located near the fuel pump and fuel lines. Inspect the fuel injectors for any signs of leaks or damage. Also, check the connections and hoses attached to the fuel injectors to ensure they are secure and intact.

Step 5: Run the Engine

Start the engine of your Nissan Murano and listen carefully for any unusual noises. A whirring or humming noise coming from the fuel tank area could indicate a fuel leak or a problem with the fuel pump. Also, pay attention to any unusual smells, as the smell of gasoline could indicate a leak.

Step 6: Check the Ground for Signs of Leaks

After running the engine, turn it off and carefully inspect the ground underneath the vehicle. Look for any signs of fuel leaks, such as puddles of gasoline or wet spots. Also, check for fuel stains or discolouration on the vehicle's underside.

Step 7: Consult a Professional

If you notice any signs of fuel leaks or if you are unsure about any aspects of the fuel system, it is important to consult a qualified mechanic or automotive specialist. They will have the knowledge and equipment to properly diagnose and address any issues.

Remember, working with the fuel system can be dangerous, so always take the necessary precautions to avoid the risk of fire or injury. If you suspect a fuel leak, do not ignore it, and do not drive the vehicle until the issue has been properly addressed.

Frequently asked questions