Celica Gt Fuel Injector Replacement: A Step-By-Step Guide

Changing the fuel injectors on a Toyota Celica GT can be a complex task and is best left to a professional. However, for those with the right tools and knowledge, it can be a relatively straightforward process. The fuel injectors are located on top of the engine and are accessible by removing the engine cover. The replacement process involves disconnecting the fuel injectors from the fuel rail and electrical connector, and installing the new injectors with new seals, grommets, and O-rings. It is important to take proper precautions when working with fuel, such as disconnecting the battery to prevent sparks. The cost of replacing fuel injectors on a Toyota Celica can range from $1,082 to $1,213, with parts priced between $973 and $1,076, and labor costs between $109 and $137.

Disconnect the fuel pump fuse and cable from the negative battery terminal

Disconnecting the fuel pump fuse and cable from the negative battery terminal is an important step when changing the fuel injectors on your Celica GT. This step is crucial for safety reasons, as it prevents the battery from generating sparks during the fuel injector replacement process.

To begin, locate the fuse box, which is usually found under the dashboard of your vehicle. Remove the fuel pump fuse from the fuse box. Once the fuse is removed, start the engine and let it stall. This step is important to ensure that the fuel lines are empty. After the engine has stalled, crank it again to confirm that the fuel lines are indeed empty.

Now, you can proceed to disconnect the cable from the negative battery terminal. This will prevent any accidental sparks during the replacement process. It is important to be cautious when working with electricity and fuel, as there is a potential risk of fire.

At this point, you can continue with the next steps in the fuel injector replacement process, such as disconnecting the cover for the cylinder head and detaching the vacuum hose and fuel tube from the fuel pipe. Remember to refer to a qualified mechanic or a trusted repair guide for a comprehensive, step-by-step procedure to ensure a safe and proper fuel injector replacement.

Remove the cover for the No. 2 cylinder head

To remove the cover for the No. 2 cylinder head on your Celica GT, you will need to follow these steps:

First, disconnect the cable from the negative battery terminal to prevent any sparks during the repair process. Ensure you have relieved the fuel system pressure. Next, remove the engine cover and the air intake assembly. This will give you access to the engine compartment, where the fuel injectors are located.

Now, disconnect the cover for the No. 2 cylinder head using a socket wrench. With the cover removed, you can access the fuel injectors and begin the replacement process.

It is important to note that working with fuel can be dangerous, and it is recommended that fuel injector replacement be left to a professional. Always take the proper precautions to avoid the risk of fire.

Detach the vacuum hose, fuel tube, and electrical connectors from the fuel pipe

To detach the vacuum hose, fuel tube, and electrical connectors from the fuel pipe, you will need to follow these steps:

First, locate the fuel injectors on top of the engine, which can be accessed from the engine compartment. Next, disconnect the cable from the negative battery terminal to prevent any sparks during the replacement process. Ensure you have the necessary tools, such as a socket wrench, and begin by removing the cover for the No. 2 cylinder head.

Now, focus on the fuel pipe and fuel injectors. Detach the vacuum hose and fuel tube from the fuel pipe, and then disconnect the electrical connectors from the fuel injectors. It is important to be gentle and careful during this process to avoid any damage to the connectors or the fuel pipe. Once the electrical connectors are detached, proceed to the next step.

The next step is to disconnect the fuel pipe from the fuel injectors themselves. This will involve some careful maneuvering, as you will need to detach the fuel injectors from the engine and remove the spacers from the cylinder head. With the fuel injectors removed from the fuel pipe, you can now access and detach the vacuum hose, fuel tube, and electrical connectors. Ensure that you set aside the removed parts safely and keep the work area organized.

Finally, with the vacuum hose, fuel tube, and electrical connectors detached from the fuel pipe, you can now move on to the next steps in the fuel injector replacement process for your Celica GT. Remember to refer to a trusted repair guide or seek professional assistance if you are unsure about any steps or procedures. Safety should always be a top priority when working on your vehicle.

Disconnect and discard the old fuel injectors

Disconnecting and discarding old fuel injectors from your Celica GT is a complex process that requires careful attention to safety precautions. Here is a step-by-step guide to help you through the process:

Step 1: Safety First

Before beginning any work on your vehicle, it is important to take the necessary safety precautions. Disconnect the cable from the negative battery terminal to prevent the battery from generating sparks during the fuel injector replacement. This is crucial when working with fuel, as it significantly reduces the risk of fire.

Step 2: Accessing the Fuel Injectors

The fuel injectors on your Celica GT are located on top of the engine and are accessible by removing the plastic engine cover. You will need to remove this cover to gain access to the fuel injectors and the fuel rail that holds them in place.

Step 3: Disconnecting the Fuel Injectors

Once you have accessed the fuel injectors, the next step is to disconnect them. Start by unplugging the injector from the fuel rail and electrical connector. You may need to remove additional engine components to fully access the fuel injectors and fuel rail. Be sure to label and set aside any hoses, clamps, or connectors that you remove during this process.

Step 4: Removing the Fuel Injectors

After disconnecting the fuel injectors, it's time to remove them from the engine. Gently pull the injectors out of the fuel rail, being careful not to damage the surrounding components. Set the old fuel injectors aside, along with any O-rings, grommets, or seals that were used with them. These parts should be discarded and replaced with new ones during the installation of the new fuel injectors.

Step 5: Cleaning and Preparation

Before installing the new fuel injectors, it is important to clean the mounting surfaces on the fuel rail and cylinder head. Use a suitable solvent or cleaner to ensure that any residue or debris is removed. This will help create a secure and reliable connection for the new fuel injectors.

Step 6: Final Discarding of Old Parts

As you prepare to install the new fuel injectors, take a moment to inspect the old fuel injectors and the parts associated with them. Discard any O-rings, grommets, seals, or other components that show signs of wear, damage, or degradation. It is important to replace these parts with new ones to ensure optimal performance and prevent leaks.

By following these steps, you can safely disconnect and discard the old fuel injectors from your Celica GT. Remember to refer to your vehicle's repair manual or seek guidance from a qualified mechanic if you have any questions or concerns during the process.

Install the new fuel injectors and coat with light machine oil

To install the new fuel injectors, first, coat the new O-rings and grommets with light machine oil. Then, coat the mounting surfaces on the fuel pipe with light machine oil. Next, install the new fuel injectors by twisting them into place so that the electrical connectors face away from the fuel pipe. Ensure that the injectors can turn freely in place. Finally, coat the injector bores in the cylinder head with light machine oil.

The fuel injectors for a Toyota car engine are located on top of the engine and are accessible from the engine compartment. However, replacing them requires the removal of additional engine components. Before beginning the replacement, it is important to disconnect the cable from the negative battery terminal to prevent the battery from generating sparks. It is also crucial to relieve the fuel system pressure and drain the engine coolant if necessary.

When replacing fuel injectors, it is recommended to use high-quality, OEM parts. Keeping the injectors the same will ensure even power across the engine and a proper air-fuel mixture for all cylinders, resulting in smooth running. Additionally, consider getting your injectors ultrasonically cleaned, as this service typically includes the replacement of all seals, screens, and pintle caps.

Fuel injectors regulate the amount of pressurised fuel used for each engine cycle, and there is one injector per cylinder. They tend to fail after 80,000 miles, and replacement costs for a Toyota Celica range from $1,082 to $1,213 on average.

Frequently asked questions