Changing Fuel Filter On 2006 Infiniti G35: Step-By-Step Guide

If you're looking to change the fuel filter on your 2006 Infiniti G35, it's important to note that some sources suggest that there is no stand-alone, serviceable fuel filter in this vehicle. Instead, the fuel filter is built into the fuel pump assembly, which is located inside the fuel tank. To access it, you'll need to remove the rear seat and look for an access door under the carpet. However, other sources suggest that the fuel filter is located under the hood, next to the plenum. It's recommended to refer to the factory service manual or seek advice from a qualified mechanic to ensure you're able to locate and replace the fuel filter correctly.

The fuel filter is part of the fuel pump assembly

The fuel filter in the 2006 Infiniti G35 is part of the fuel pump assembly, which is located inside the fuel tank. This means that the fuel filter is internal and not accessible from under the hood.

To access the fuel filter, you will need to remove the rear seats of your car and pull up the carpeting to find access to the fuel pump assembly. Once you have located the assembly, you will need to remove it from the fuel tank to access the fuel filter.

It is important to note that some sources suggest that the fuel filter in the 2006 Infiniti G35 does not need to be replaced, as it is a maintenance-free item. However, if you do choose to replace the fuel filter, it is recommended to replace the fuel pump at the same time.

The fuel pump assembly for the 2006 Infiniti G35 can be purchased from a variety of retailers, including O'Reilly Auto Parts, CARiD.com, and Infiniti dealerships. When purchasing a replacement assembly, it is important to ensure that it is compatible with your vehicle's make, model, and year.

The fuel pump assembly will include the electric fuel pump, fuel strainer, and fuel gauge sending unit. It may also include other components, such as a fuel pressure regulator, hoses, clamps, connectors, and a wiring harness.

Replacing the fuel pump assembly and fuel filter in the 2006 Infiniti G35 can be a complex task, and it is recommended to refer to a repair manual or seek the assistance of a qualified mechanic if you are unsure about any part of the process.

The fuel pump assembly is located inside the fuel tank

It is recommended that you replace the fuel pump when replacing the fuel filter. The fuel filter can get very dirty, so it is important to maintain and replace it when necessary.

When replacing the fuel filter, it is important to also consider the fuel pump and whether it needs to be changed as well. This is because accessing the fuel filter requires removing and disassembling the fuel pump assembly. Therefore, it is more convenient and efficient to replace both components at the same time.

Additionally, it is worth noting that the fuel filter is built into and considered a part of the fuel pump assembly. This means that the two components are closely connected and work together to ensure the proper functioning of your Infiniti G35's fuel system.

By following these instructions and considering the recommendations, you can successfully access and replace the fuel filter on your 2006 Infiniti G35.

Access the fuel tank by removing the rear seat

To access the fuel tank of your 2006 Infiniti G35, you will need to remove the rear seat. Here is a step-by-step guide on how to do this:

First, gather the necessary tools. You will need a socket wrench and a Phillips-head screwdriver. You may also want to wear gloves to protect your hands and have a small container or bag to hold any removed screws.

Next, locate the rear seat bottom cushions. There are two rear seat bottom cushions in the Infiniti G35, and you will need to remove both of them. Start by pulling up on the front edge of each cushion. This will release the clips holding the cushions in place. Be careful not to damage the clips or the upholstery as you remove the cushions. Set the cushions aside in a safe place.

Once the bottom cushions are removed, you will see the rear seat backs. There are also two rear seat backs, and you will need to remove both of them. Start by locating the Phillips-head screws at the bottom of each seat back. Use your screwdriver to remove these screws. Again, be careful not to strip the screws or damage the upholstery. With the screws removed, pull the seat backs firmly towards the rear of the car to release them from their tracks. Set the seat backs aside with the cushions.

With the rear seats removed, you will now have access to the fuel tank. Be careful as you work around the fuel tank, as it contains flammable liquids and pressurised components. If you are not comfortable performing these steps yourself, it is recommended that you consult a qualified mechanic or seek advice from an Infiniti dealership.

Remember to reinstall the rear seats properly and securely when you have finished working on the fuel tank.

There is an access door under the carpet

To access the fuel filter on a 2006 Infiniti G35, you will need to remove the rear seat to reveal the access door under the carpet.

First, remove the rear seat. You can do this by pulling up on the bottom cushion and disconnecting it from the clips that hold it in place. Once the bottom cushion is removed, you will see the access door under the carpet. Pull back the carpet to reveal the door.

The access door will lead to the fuel tank, where the fuel filter is located. It is built into and part of the fuel pump assembly. To access the fuel filter, you will need to remove the fuel pump assembly from the tank and disassemble it. This process can be complex, so it may be helpful to refer to a repair manual or seek assistance from a qualified mechanic.

Remember to exercise caution when working with fuel system components and always follow proper safety procedures.

The fuel pump will need to be removed from the tank to access the filter

To change the fuel filter on a 2006 Infiniti G35, you will first need to remove the rear seat to reveal an access door under the carpet. The fuel pump assembly is located inside the fuel tank and will need to be removed to access the filter. This process is relatively complex and time-consuming, so it may be worth considering whether you need to change the fuel filter at all.

The fuel filter on the Infiniti G35 is built into the fuel pump assembly and is not a stand-alone, serviceable part. This means that the entire fuel pump assembly will need to be removed from the tank and disassembled to access and replace the filter. It is recommended that you replace the fuel pump at the same time as changing the fuel filter.

There are a number of steps involved in removing the fuel pump assembly from the tank. First, you will need to disconnect the electrical connector and fuel lines from the assembly. You will then need to remove the retaining ring and carefully lift the assembly out of the tank. Be very careful not to damage the fuel level sensor, which is attached to the assembly. Once the assembly is removed, you can access the fuel filter and replace it with a new one.

It is important to note that this process can be dangerous if not done correctly, as you are working with flammable liquids and high-pressure fuel lines. Always refer to the factory service manual for your vehicle and take appropriate safety precautions when attempting any fuel system repairs or maintenance.

Frequently asked questions