Katerina Swanson
The Phoenix Hawk LAM was the largest Land-Air 'Mech produced during the Star League. It was capable of remaining in AirMech mode and had a basic configuration armed with a torso-mounted large laser and tandem medium laser and machine gun in each arm. While in AirMech mode, the Phoenix Hawk LAM could take 10% more damage, had a faster walk speed, and could ignore terrain and landmines. However, it had limited fuel reserves, with only 30 points under BattleTech Compendium rules. The Phoenix Hawk LAM was heavier than the BattleMechs it was based on, weighing 5 tons more.
| Characteristics | Values |
|---|---|
| Fuel | Limited fuel capacity; 30 points under BattleTech Compendium rules |
| Weight | Heavier than the BattleMechs they are based on by 5 tons |
| Armament | Torso-mounted Amsterdam 120 large laser; tandem Maxum medium laser-Sperry Browning machine gun mounts in each arm |
| Heat Management | 12 double heat sinks keep the heat curve low |
| Armor | Limited armor protection |
| Maneuverability | Limited maneuverability; capable of evading heavier foes |
| Size | Largest Land-Air 'Mech produced during the Star League |
| Manufacturer | Allied Aerospace |
Explore related products
What You'll Learn
- The Phoenix Hawk LAM was the largest Land-Air Mech produced during the Star League
- It was capable of remaining in AirMech mode
- It was developed for the Star League Defense Force Royal Divisions in 2692
- It was heavier than the BattleMechs it was based on
- It was armed with a torso-mounted Amsterdam 120 large laser
The Phoenix Hawk LAM was the largest Land-Air Mech produced during the Star League
The basic configuration of the Phoenix Hawk LAM is armed with a torso-mounted Amsterdam 120 large laser, and tandem Maxum medium laser-Sperry Browning machine gun mounts in each arm. House Marik produced a variant of the Phoenix Hawk LAM which replaces the large laser and machine guns with a Holly LRM-10. Another variant, the PHX-HK2, removes the ER large laser, a medium laser, and two single heat sinks, replacing them with an experimental snub-nose PPC, Beagle active probe, and an additional half-ton of armour.
The Phoenix Hawk LAM was the largest LAM ever constructed capable of remaining in AirMech mode. Unfortunately, large Land-Air Mech conversion technology was not fully researched before the fall of the Star League, and the Phoenix Hawk LAM frequently met its end due to glitches. The end of the Star League and the destruction of Allied Aerospace facilities at the beginning of the First Succession War prevented further development and refinement of the Phoenix Hawk LAM.
The Phoenix Hawk LAM had limited fuel, armour, and manoeuvrability, making it easy prey for aerospace fighters of the same weight class. However, it could manoeuvre fast enough to evade heavier foes. While in AirMech mode, the Phoenix Hawk LAM could take 10% more damage, had a stability threshold of -40, a 100% faster walk speed, a +0.2 sprint, could ignore terrain and landmines for movement, and had a 360-degree firing arc.
The Weight of 36,000 Gallons of Fuel: A Quick Guide
You may want to see also
Explore related products
It was capable of remaining in AirMech mode
The Phoenix Hawk LAM was the largest Land-Air 'Mech produced during the Star League. It was capable of remaining in AirMech mode, a hybrid mode between aerospace fighter and BattleMech modes. In this mode, the LAM can move as per a Wing in Ground Effect vehicle, with a 100% faster walk speed and the ability to ignore terrain and landmines. However, it also takes 10% more damage and has a lower stability threshold.
The Phoenix Hawk LAM was developed for the Star League Defense Force Royal Divisions in 2692. It was based on the successful Phoenix Hawk medium BattleMech. The basic configuration of the Phoenix Hawk LAM includes a torso-mounted large laser and tandem medium lasers and machine guns in each arm. It also had limited fuel, armour, and manoeuvrability, making it vulnerable to aerospace fighters of the same weight.
The Phoenix Hawk LAM was produced by Allied Aerospace, who reworked their designs for conversion equipment and the size of the LAM after learning from their mistakes with the Shadow Hawk LAM. Unfortunately, large Land-Air 'Mech conversion technology was not fully researched before the fall of the Star League, and the Phoenix Hawk LAM often met its end due to glitches. The destruction of Allied Aerospace facilities at the beginning of the First Succession War prevented further development and refinement of the Phoenix Hawk LAM.
Despite its limitations, the Phoenix Hawk LAM had some notable variants. House Marik produced a version that replaced the large laser and machine guns with a Holly LRM-10. Additionally, Jade Falcon scientists modified a Phoenix Hawk LAM, dubbed "Evil Twin One", which included an additional large laser, extra SRM capacity, and a dual cockpit allowing a Mechwarrior and aerospace pilot to control their respective modes. Evil Twin One was ultimately destroyed in its only battle.
The Phoenix Hawk LAM has also made its way into tabletop gaming and miniature collecting, with enthusiasts sharing their experiences and tips online.
The B-52's Fuel Capacity: A Strategic Advantage
You may want to see also
Explore related products
It was developed for the Star League Defense Force Royal Divisions in 2692
The Phoenix Hawk LAM was initially developed for the Star League Defense Force Royal Divisions in 2692. This variant of the Phoenix Hawk LAM used four medium lasers and a single ER large laser as its main firepower. It was equipped with 12 double heat sinks to keep the heat curve low. However, its limited fuel supply, armour, and manoeuvrability made it vulnerable to aerospace fighters of the same weight class. Despite this disadvantage, the Phoenix Hawk LAM could manoeuvre quickly enough to evade heavier opponents.
The Phoenix Hawk LAM was the largest Land-Air 'Mech produced during the Star League era. Allied Aerospace redesigned their conversion equipment and increased the size of the LAM, learning from their mistakes with the Shadow Hawk LAM and the success of the Stinger LAM. Despite its size, the Phoenix Hawk LAM was capable of remaining in AirMech mode. Unfortunately, the large Land-Air 'Mech conversion technology was not fully refined before the fall of the Star League, leading to occasional glitches that ended the mech's operation.
The basic configuration of the Phoenix Hawk LAM included a torso-mounted Amsterdam 120 large laser and tandem Maxum medium laser-Sperry Browning machine gun mounts in each arm. This provided the mech with significant firepower to complement its mobility. However, the Phoenix Hawk LAM's large size also presented challenges in terms of armour and manoeuvrability, making it a target for aerospace fighters.
The development of the Phoenix Hawk LAM was discontinued after the fall of the Star League and the destruction of Allied Aerospace facilities during the First Succession War. The loss of these facilities prevented further advancements and refinements to the design. Despite its limitations and the eventual halt in its production, the Phoenix Hawk LAM remains a significant example of Land-Air 'Mech technology, showcasing the capabilities and challenges of combining aerial and terrestrial combat functions in a single machine.
C-17 Globemaster: Massive Fuel Capacity, Global Reach
You may want to see also
Explore related products
It was heavier than the BattleMechs it was based on
The Phoenix Hawk LAM was the largest Land-Air 'Mech produced during the Star League. It was also the largest LAM ever constructed, capable of remaining in AirMech mode. The Phoenix Hawk LAM was heavier than the BattleMechs it was based on—typically, LAMs are somewhat heavier, and in the case of the Phoenix Hawk LAM, it was heavier by 5 tons. The weight difference is due to the distinct design and functionality of LAMs, which can operate as both aerospace fighters and BattleMechs.
The Phoenix Hawk LAM was developed for the Star League Defense Force Royal Divisions in 2692. Allied Aerospace reworked their designs for conversion equipment and the size of the LAM, learning from their previous experiences with the Shadow Hawk LAM and the Stinger LAM. The resulting Phoenix Hawk LAM was a large machine, with a basic configuration that included a torso-mounted large laser and tandem medium laser and machine gun in each arm.
The weight of the Phoenix Hawk LAM had advantages and disadvantages. Its large size allowed it to carry more armour and equipment, such as an additional half ton of armour in one variant. However, its weight also made it easier prey for aerospace fighters of the same weight class, and it had limited fuel and manoeuvrability. Despite its size, the Phoenix Hawk LAM could manoeuvre fast enough to evade heavier foes.
The Phoenix Hawk LAM's weight and design reflect its intended role as a versatile and powerful combat machine. While it faced challenges due to the occasional glitch and the destruction of Allied Aerospace facilities, its size and capabilities made it a unique and formidable presence in the Star League era.
JLTV Fuel Capacity: How Much Can It Hold?
You may want to see also
Explore related products
It was armed with a torso-mounted Amsterdam 120 large laser
The Phoenix Hawk LAM, the largest Land-Air 'Mech produced during the Star League, had modest fuel reserves, with only 30 points of fuel under BattleTech Compendium rules. It was armed with a torso-mounted Amsterdam 120 large laser, which provided significant firepower. The large laser was complemented by tandem medium lasers and machine guns in each arm, providing additional offensive capabilities. The Phoenix Hawk LAM was developed for the Star League Defence Force Royal Divisions in 2692 and was an advanced 'Mech capable of both flight and ground operations.
The basic configuration of the Phoenix Hawk LAM's weaponry included the Amsterdam 120 large laser, which was a significant upgrade over the previous variant's ER large laser. The Amsterdam 120 offered increased range, accuracy, and damage output, making it a formidable weapon. The large laser was typically mounted in the torso, providing a stable platform for long-range engagements.
In addition to the Amsterdam 120 large laser, the Phoenix Hawk LAM also featured tandem Maxum medium laser-Sperry Browning machine gun mounts in each arm. This dual-weapon system provided a balance of versatility and firepower. The medium lasers offered precision and range, while the machine guns delivered rapid-fire capabilities at shorter distances. Together with the large laser, this combination of weapons made the Phoenix Hawk LAM a well-rounded and dangerous opponent in both aerospace and ground combat scenarios.
The Phoenix Hawk LAM's weaponry could be further enhanced through modifications and variant designs. For example, House Marik's variant replaced the large laser and machine guns with a Holly LRM-10, offering a different tactical approach. The Evil Twin One, a modified Phoenix Hawk LAM, retained the original armament while also adding an additional large laser and extra SRM capacity. These modifications demonstrated the flexibility and adaptability of the Phoenix Hawk LAM design, allowing it to be tailored to specific mission requirements and combat roles.
While the Phoenix Hawk LAM's limited fuel reserves may have restricted its operational endurance, its advanced weaponry, including the torso-mounted Amsterdam 120 large laser, ensured that it packed a powerful punch in both aerospace and ground engagements. The combination of range, accuracy, and firepower provided by its arsenal made the Phoenix Hawk LAM a force to be reckoned with, despite its technological glitches and the occasional challenges faced by its operators.
The Titanic's Daily Fuel Consumption: A Historical Perspective
You may want to see also
Frequently asked questions
The Phoenix Hawk LAM has limited fuel and can only carry 30 points of fuel under BattleTech Compendium rules.
The Phoenix Hawk LAM is the largest Land-Air 'Mech ever produced during the Star League.
The Phoenix Hawk LAM is armed with four medium lasers and a single ER large laser. It also has 12 double heat sinks to keep the heat curve low.
Due to its limited fuel, armour, and maneuverability, the Phoenix Hawk LAM is vulnerable to aerospace fighters of the same weight.
