How To Change The Fuel Pump In A Can-Am Maverick

Changing the fuel pump in a Can-Am Maverick can be a tricky process. There is a possibility that the regulator is faulty or that there is another issue causing problems with the fuel system. Symptoms of a faulty fuel pump include poor idling, sputtering, and cutting out at high speeds. If you choose to replace the fuel pump, you can purchase a complete fuel pump assembly that is designed to fit the Can-Am Maverick, which makes the process easier. It is important to note that, for some models, you must run 2018 ECU programming to run the 2018 fuel pump assembly.

Fuel pump replacement parts

Changing the fuel pump on a Can-Am Maverick can be tricky, but it is possible to do it yourself. There are a number of replacement parts available on the market, which typically include a fuel pump, fuel pressure regulator, tank seal, and strainer.

QFS OEM In-Tank Fuel Pump Replacement

This replacement fuel pump is compatible with Can-Am Commander 1000/1000 Max/800/800 Max Maverick 1000 All Models EFI, model years 2011-2021. It comes with a fuel pressure regulator, tank seal, and strainer. It is designed for problem-free operation in excess of 10,000 hours or 100,000 miles, and features upgraded polymers, brushes, and commutators to guarantee consistent flow, amperage draw, and quiet operation. It also includes a lifetime warranty.

Can-Am Fuel Pump Assembly

This is a complete fuel pump assembly that fits directly into the stock location of your Can-Am Maverick. It is compatible with Maverick 1000 (including Max, but not X3), Maverick Sport 1000 (including Max), and Maverick X3 Turbo (all models). It is designed to address issues such as poor idling, sputtering, and cutting out at high speeds.

Sxqddz Fuel Pump Assembly

This fuel pump assembly is compatible with Can-Am Commander Maverick 800/1000 EFI/LTD/STD/X/XT/DPS 4x4, model years 2011-2020. It replaces part numbers # 709000362 and # 709000759.

Hodflop Fuel Pump Assembly

This fuel pump assembly is compatible with Can-Am Commander Maverick 800/1000, model years 2011-2020, as well as Commander Max 800/1000, model years 2014-2020, and Maverick Max, model years 2016-2018. It replaces part numbers # 709000362 and # 709000759.

DOLKSN Fuel Pump Module Assembly

This fuel pump module assembly fits Can-Am Commander Maverick 800/1000 EFI/LTD/STD/X/XT/DPS 4x4, model years 2011-2020. It replaces part numbers # 709000362 and # 709000759.

Fuel pump installation

This guide will take you through the process of installing a fuel pump in your Can-Am Maverick. Please note that this is a general guide and you should always refer to the instructions provided with your specific fuel pump for the most accurate and safe installation process.

Step 1: Prepare Your Vehicle

Before beginning the installation process, it is important to ensure that your vehicle is properly prepared. Park your vehicle on a level surface and engage the parking brake to prevent any accidental movement. It is also recommended to disconnect the negative battery terminal to prevent any electrical shorts during the installation.

Step 2: Locate the Fuel Pump

The fuel pump in the Can-Am Maverick is located in the fuel tank. To access it, you will need to remove the seat and any other necessary components to gain access to the fuel tank. Refer to your vehicle's service manual for detailed instructions on accessing the fuel pump.

Step 3: Disconnect the Old Fuel Pump

Once you have located the fuel pump, carefully disconnect the electrical connector and any fuel lines attached to the pump. Be sure to have a container ready to catch any spilled fuel. You may also need to remove the fuel pump assembly to gain better access to the pump.

Step 4: Install the New Fuel Pump

With the old fuel pump removed, you can now install the new one. Carefully connect the new fuel pump to the electrical connector and fuel lines, ensuring that all connections are secure and tight. If you had to remove the fuel pump assembly, reinstall it at this point.

Step 5: Test the New Fuel Pump

Before closing up your vehicle, it is important to test the new fuel pump to ensure it is functioning properly. Reconnect the negative battery terminal and turn on the vehicle. Listen for any unusual noises coming from the fuel pump and check for any fuel leaks. If everything appears to be functioning correctly, turn off the vehicle.

Step 6: Reassemble Your Vehicle

Finally, reassemble your vehicle by reinstalling any components that were removed to access the fuel pump. Be sure to refer to your vehicle's service manual for specific instructions on reassembly. Once everything is reassembled, take your vehicle for a test drive to ensure that it is running smoothly.

Please note that these steps are general guidelines, and the specific process may vary depending on your vehicle's make, model, and year. Always refer to your vehicle's service manual or a trusted mechanic for more detailed instructions on fuel pump installation.

Additionally, it is important to note that working on fuel systems can be dangerous, and it is always recommended to seek the assistance of a qualified professional if you are unsure about any part of the installation process.

Fuel pump issues

• Engine not starting or idling improperly
• Loud whining sound coming from the pump
• "Surging" engine, where the fuel pump delivers too much fuel at once
• Poor idling, sputtering, or cutting out at high speeds

If you are experiencing any of these issues with your Can-Am Maverick, it is possible that you need to replace the fuel pump. It is recommended to consult a professional or refer to a service manual for specific instructions on how to change the fuel pump for your particular model. Additionally, make sure to use the correct fuel pump for your vehicle's year and model to ensure compatibility and proper function.

When replacing the fuel pump, it is important to also consider other components that may need to be changed at the same time. For example, the fuel filter should be replaced regularly, and there may be multiple filters that need attention. The fuel pressure regulator, tank seal, and strainer are also important components that may need to be replaced along with the fuel pump.

It is worth noting that changing the fuel pump may not always fix the issue. There could be other underlying problems with the vehicle, such as a faulty regulator or other issues. In some cases, it may be more convenient and effective to install a complete fuel pump assembly rather than just replacing the fuel pump itself. This can save time and effort in troubleshooting and ensure the proper operation of your fuel system.

Fuel filter change

The fuel filter in a 2019 Can-Am Maverick X3 RC is located on the bottom of the fuel pump, which is under the plastic right in front of the passenger side glove box. To access the fuel filter, you will need to pull out the fuel pump.

It is recommended to replace the fuel filter at 1000 miles or 100 hours. However, some users have reported that the in-tank filters do not require servicing and definitely not every 1000 miles.

Signs that your fuel pump may be failing include:

• Engine not starting or idling
• Current fuel pump making a loud whining sound
• Engine "surging" (fuel pump is delivering excess fuel)

Fuel pump assembly

The fuel pump assembly is a crucial component of the Can-Am Maverick's fuel system, supplying fuel from the tank to the engine. While changing out the fuel pump can be tricky, a complete fuel pump assembly offers a straightforward solution. This involves a drop-in installation, where the fully assembled unit is placed into the fuel tank and plugged in.

Symptoms of a Faulty Fuel Pump

There are several signs that can indicate a failing fuel pump, including:

• Poor idling
• Sputtering
• Cutting out at high speeds
• Difficulty starting the engine
• Loud whining sound from the pump
• "Surging" engine, where the pump delivers excess fuel

Fuel Pump Replacement Options

When it comes to replacing the fuel pump, there are two main options:

• Complete Fuel Pump Assembly: This option offers a simple drop-in installation, eliminating the need for complex fuel pump changes. It is a fully assembled unit that directly replaces the stock fuel pump, ensuring proper operation and longevity.
• Individual Fuel Pump Replacement: This involves replacing only the fuel pump itself, which can be more complex and time-consuming. It requires disassembling the pump module and installing a new pump, which may include additional components like a fuel pressure regulator, tank seal, and strainer.

Fuel Pump Compatibility

It is essential to ensure that the fuel pump assembly is compatible with your specific Can-Am Maverick model. Different models have unique fuel pump requirements, and using the wrong assembly can lead to improper function and potential damage. Always verify the compatibility of the fuel pump assembly with your vehicle's make, model, and year before proceeding with the installation.

Fuel Pump Maintenance

To ensure optimal performance and longevity of your Can-Am Maverick's fuel pump assembly, it is important to follow the recommended maintenance schedule. While fuel pump filters typically have longer intervals, it is always a good idea to refer to the owner's manual for specific recommendations. Regular maintenance can help prevent unexpected failures and keep your vehicle running smoothly.

Frequently asked questions