Rajan Wilcox
The fuel tank on a Victory Vision motorcycle is located on either side of the frame, with a fuel capacity of around 3 gallons per side. The fuel tank system includes various components such as the fuel pump, fuel line, fuel cap, and fuel tank overflow tube. While the exact location of the fuel tank may vary depending on the motorcycle model and year, it is typically found underneath the seat or near the engine.
| Characteristics | Values |
|---|---|
| Fuel Tank Capacity | 5.8 gallons (22 litres) |
| Fuel Light Indicator | Illuminates when 1 gallon (3.8 litres) of fuel remains |
| Fuel Range | 40-45 miles per gallon |
| Fuel Pump and System | Available for purchase |
| Fuel Tank Replacement | Available for purchase |
| Fuel Tank Overflow Tube | Located at the bottom of the fill hole |
| Fuel Gauge Behaviour | Slow movement between full and 3/4 tank, faster movement between 3/4 and empty |
| Fuel Efficiency | Varies with speed and terrain, ranging from 31 MPG to 50 MPG |
Explore related products
What You'll Learn
- The fuel tank capacity of a Victory Vision is 5.8 gallons
- The fuel sensor moves slowly at a full tank mark but quickly between 3/4 and empty
- Water infiltration in the fuel tank can be caused by a faulty water drain
- The fuel tank has an overflow tube to prevent overfilling
- The Victory Vision fuel pump system can be purchased online
The fuel tank capacity of a Victory Vision is 5.8 gallons
To get a more accurate estimation of fuel consumption, it is recommended to reset the "average MPG" on the Victory Vision each time you refuel. This will help you understand your fuel-burning rate per tank. Additionally, it's worth noting that the fuel sensor in these bikes is non-linear. They respond slowly when the tank is relatively full but move rapidly between the three-quarters and empty marks. Therefore, some owners suggest monitoring your odometer or simply refuelling at set intervals, such as every 150 miles, to avoid running out of fuel.
While the Victory Vision's fuel tank capacity is stated as 5.8 gallons, it is important to be cautious and not push the bike to its limits regarding fuel range. Some owners have shared their experiences of riding at 65 MPH and achieving between 180 and 220 miles between fill-ups. However, they noted that they never let the fuel level drop below 20 miles after the fuel warning light came on. Additionally, they emphasised that factors like wind direction, speed, and terrain can significantly impact fuel efficiency.
The Victory Vision's fuel tank capacity of 5.8 gallons provides a reasonable range for riders. However, it is always advisable to refuel before reaching extremely low fuel levels. While the bike can handle occasional low fuel situations, it is not advisable to make it a habit. Maintaining proper fuel levels ensures the fuel pump remains cool and also helps improve mileage and performance, especially for bikes with less than 5000 miles on them.
In conclusion, the Victory Vision's fuel tank capacity is officially stated as 5.8 gallons in the owner's manual. However, owners' experiences vary, and it is recommended to pay close attention to fuel levels and consumption patterns. Resetting the "average MPG" with each refuel and understanding the non-linear response of the fuel sensor can help riders make more informed decisions about refuelling. Ultimately, staying proactive about refuelling and maintaining proper fuel levels will ensure a smoother riding experience and help avoid being stranded on the roadside.
Preventing Water in Your Boat's Fuel Tank: Effective Strategies
You may want to see also
Explore related products
The fuel sensor moves slowly at a full tank mark but quickly between 3/4 and empty
The fuel sensor in Victory Vision motorcycles does not have a linear response. This means that the rate at which the needle moves varies according to the fuel level. Specifically, the fuel sensor moves slowly at a full tank mark but quickly between 3/4 and empty. This behaviour can be explained by understanding the mechanism behind the fuel gauge.
The fuel gauge system consists of three parts: the fuel gauge sender sensor, the fuel gauge in the instrument cluster, and the wiring between them. The fuel sending unit, also known as the fuel level sensor, is located in the fuel tank and measures the fuel level. It consists of a float, a metal rod/arm, and a variable resistor. The float moves up or down according to the fuel level, causing the metal rod to pivot and the wiper inside the variable resistor to move. The wiper's position on a strip of resistive material connected to a ground determines the strength of the electric current from the resistor. This current is interpreted by the fuel gauge, which displays the fuel level accordingly.
The non-linear behaviour of the fuel sensor in Victory Vision motorcycles can be attributed to the design of the fuel sending unit or the fuel gauge interpretation. The rate of change in the electric current from the resistor may not be linear with respect to the fuel level, resulting in slower or faster needle movement at certain fuel levels. Additionally, the fuel gauge's interpretation of the electric current may also contribute to the non-linear response.
It is important to note that the fuel gauge system relies on electrical connections and circuitry. Any faults or loose connections in the system can lead to inaccurate fuel level readings. For example, if the contacts wear out, the circuits can remain open, causing the fuel gauge to malfunction. Additionally, corrosion or interrupted ground connections can also affect the accuracy of the fuel gauge.
To troubleshoot a faulty fuel gauge, several tests can be performed. One method is to use a multimeter to measure the resistance by placing one probe on the sending terminal and the other on the ground. If there is no change in resistance when moving the float, it indicates a failed sending unit. Another test involves checking the continuity between the sending terminal and the connection at the tank. If there is no continuity, it suggests a break in the wiring.
Priming Outboard Engines: Post-Fuel Tank Maintenance Guide
You may want to see also
Explore related products
Water infiltration in the fuel tank can be caused by a faulty water drain
The fuel tank on a Victory Vision motorcycle has a capacity of 5.8 gallons, according to the owner's manual. However, some users have observed that the bike can be filled up with less than the specified amount.
Now, water infiltration in the fuel tank of a Victory Vision motorcycle can be a cause for concern and can lead to operational issues. This issue can be caused by a faulty water drain, which is located on the left side of the tank, just inside where the fuel cap sits. If the water drain breaks inside the tank or becomes blocked, water can back up through the tank vent and contaminate the fuel.
One sign that your Victory Vision motorcycle may have water in the fuel tank is if it stalls or has difficulty starting, especially after being left unused for several days. If you suspect water infiltration, it is important to address the issue promptly. Do not attempt to start the engine if you are certain that a substantial amount of water has entered the fuel tank, as this could damage the engine. Instead, drain the fuel tank and refill it with fresh gasoline. You may also consider replacing the fuel filter and having your injectors cleaned by a professional mechanic to prevent future issues.
Additionally, it is recommended to regularly inspect and maintain the water drain and overflow hose to prevent blockages and ensure proper drainage. This includes checking for any debris or buildup that may be causing a blockage. By taking proactive measures, you can help prevent water infiltration in your Victory Vision's fuel tank and maintain the optimal performance of your motorcycle.
Locomotive Fuel Tanks: How Much Fuel Do They Hold?
You may want to see also
Explore related products
The fuel tank has an overflow tube to prevent overfilling
The fuel tank on a Victory Vision is located under the seat and can hold up to 5.8 gallons of fuel. It is essential to be cautious when filling the tank to avoid overfilling, which could lead to fuel spillage and potential hazards. To prevent this, the fuel tank is designed with an overflow tube that serves as a safety mechanism.
The overflow tube is a critical component of the fuel tank and plays a vital role in preventing overfilling. It is typically connected to the fuel tank's filler neck, allowing excess fuel to escape through the tube if the tank becomes overfilled. This mechanism ensures that any excess fuel is safely diverted away from the tank, reducing the risk of spillage during the refuelling process.
By incorporating the overflow tube, Victory Motorcycles have implemented an effective safety measure. Should the fuel tank be overfilled, the tube acts as a release valve, allowing the excess fuel to escape. This prevents the fuel from backing up in the filler neck and potentially overflowing when the cap is removed. The tube provides a controlled pathway for the excess fuel to exit, minimizing the risk of spills and potential hazards associated with overfilling.
Additionally, the overflow tube often serves a secondary function by acting as a vent. It helps regulate the pressure within the fuel tank, ensuring proper airflow and allowing for smoother fuel delivery to the engine. This venting function is crucial for maintaining the optimal performance and efficiency of the motorcycle's fuel system.
Understanding the purpose and functionality of the overflow tube is essential for the proper care and maintenance of your Victory Vision. It is important to regularly inspect the tube for any blockages or leaks, ensuring its effectiveness in preventing overfilling and maintaining proper fuel tank ventilation. By paying attention to this critical component, you can help ensure the safety and optimal performance of your motorcycle.
Acerbis Fuel Tanks: Where Are They Manufactured?
You may want to see also
Explore related products
The Victory Vision fuel pump system can be purchased online
Additionally, VictoryOnly.com offers the Intank EFI Fuel Pump Victory Vision by Quantum Fuel Systems. This fuel pump is designed as a direct replacement for the in-tank fuel pump and comes with a lifetime warranty on the parts. The pump does not include a new fuel pressure regulator, but the old one can be reused as they rarely need to be replaced. The Polaris fuel pressure specification of these models can be up to 62 psi +/- 3 psi, depending on the regulator on the Victory motorcycle. Typical fuel pump failure symptoms include stalling, popping, and intermittent quitting during hot weather operation.
Another option for purchasing the Victory Vision fuel pump system online is eBay. eBay offers a variety of Victory motorcycle fuel pumps, including replacement fuel pumps and exhaust system parts. The prices on eBay vary, with some sellers offering free shipping and returns.
It is important to note that when purchasing fuel pump systems online, customers should carefully review the product specifications and compatibility with their specific Victory Vision model to ensure a proper fit and functionality. Additionally, some fuel pump systems may require additional components or modifications for a complete installation.
Empyrion: Warp Tank Fuel Requirements Explained
You may want to see also
Frequently asked questions
The fuel tank is on the left side of the Victory Vision.
You may need to replace your fuel tank if you notice any leaks or cracks.
You can buy a replacement fuel tank for your Victory Vision from Witchdoctors, who offer a one-stop shopping experience with a wide selection of Victory and Indian motorcycle parts.
It is recommended that you refer to the manufacturer's publication(s) and/or website(s) for specific fitment and other important application information. You can also contact Witchdoctors for assistance.
