Best Places To Buy Chainsaw Fuel Line Replacements

Chainsaw fuel lines can clog, crimp, or crack over time, which restricts fuel flow and prevents the engine from starting. If your chainsaw won't start, you can replace the fuel lines yourself by following a DIY repair guide. You can buy replacement fuel lines for chainsaws from a variety of retailers, including Amazon, Walmart, Sears, and Home Depot.

Fuel line replacement kits for chainsaws

For example, Amazon offers a range of fuel line replacement kits for chainsaws, including:

• Awoopdan Fuel Line Replacement Kit: This kit includes four fuel lines with different inner and outer diameters to fit a range of chainsaws and blowers.
• HUZTL Fuel Line Hose Kit: Designed for Poulan, Craftman, and other small engine fuel hoses, this kit includes four fuel lines with varying inner and outer diameters.
• AC04122 Fuel Line Kit: Suitable for small engines, this kit includes a primer bulb and fuel filter, and is compatible with Zama, Poulan, Craftman, Ryobi, Homelite, and Husqvarna brands.

Sears also offers a range of fuel line replacement kits for chainsaws, such as:

• Proven Part Chainsaw Gas Fuel Line and Filter Kit: This kit includes two fuel lines and filters compatible with McCulloch chainsaws.
• Husqvarna Craftsman Poulan Chainsaw Replacement Fuel Line Fitting: A replacement fuel line designed specifically for Husqvarna, Craftsman, and Poulan chainsaws.
• Panari Tune-Up Kit: Including an air filter, primer bulb, and fuel line, this kit is suitable for Poulan, Craftsman, and Husqvarna chainsaws.

Additionally, Walmart offers fuel line replacement kits that are compatible with various chainsaw models. For instance:

• Poulan Craftsman Chainsaw 3 Pack OEM Replacement Fuel Tank Line: This kit provides three replacement fuel tank lines for Poulan and Craftsman chainsaws.
• Uxcell Fuel Filter Fuel Line: Designed for Stihl chainsaw models, this kit includes three fuel filters and fuel lines.
• YESTUNE Fuel Gas Line Pipe Hose: A 2.5mm fuel line hose suitable for trimmer chainsaws and blowers.

When purchasing a fuel line replacement kit for a chainsaw, it is important to ensure compatibility with the specific make and model of your chainsaw.

Where to buy fuel line replacement kits

Fuel line replacement kits for chainsaws can be purchased from a variety of online retailers, including Amazon and Walmart.

Amazon

Amazon offers a wide range of fuel line replacement kits for various chainsaw models, including:

• HUZTL Fuel Line Hose Kit, which comes in four different sizes and is suitable for Poulan, Craftsman, and other small engine fuel hoses.
• Awoopdan Fuel Line Replacement Kit, which includes four fuel lines with different inner and outer diameters.
• AC04122 Fuel Line Kit, which includes a primer bulb and fuel filter and is compatible with small engines from Zama, Poulan, Craftsman, Ryobi, Homelite, and Husqvarna.
• MOTOALL 4 Size Yellow Fuel Line Hose, which is 16 feet long and suitable for Poulan, Craftsman, and other power tools.
• Hilitchi 20-Feet Petrol Fuel Line Hose, which comes in four different sizes and is suitable for common 2-cycle small engines.

Walmart

Walmart also offers a range of fuel line replacement kits for chainsaws, such as:

• Poulan Craftsman Chainsaw 3 Pack OEM Replacement Fuel Tank Line.
• 4 Sizes Premium Petrol Fuel Line, a 4-foot-long hose suitable for Poulan, Craftsman, and other power tools.
• Uxcell Fuel Filter Fuel Line, which is compatible with various chainsaw models, including 021, 023, 025, MS210, MS230, and MS250.
• YESTUNE New Sell Fuel Gas Line Pipe Hose, a 2.5mm fuel line suitable for trimmers, chainsaws, and blowers.
• 2Pcs Petrol Fuel Gas Line Pipe Hose, a 2-piece fuel line set with a 2mm and a 2.5mm hose suitable for string trimmers, chainsaws, and blowers.

Both Amazon and Walmart offer free delivery on orders over a certain amount, providing convenience and value for customers purchasing fuel line replacement kits for their chainsaws.

Chainsaw fuel line maintenance

Buying a Replacement Fuel Line

Firstly, it's important to purchase a suitable replacement fuel line for your chainsaw. You can find these at various hardware stores or online retailers. Websites such as Amazon and Walmart offer a wide range of fuel line options for different chainsaw models. Make sure to check the compatibility of the fuel line with your chainsaw's make and model.

Installing the Fuel Line

When installing a new fuel line, ensure you have the correct size and type of fuel line for your chainsaw. If the line is too big or too small, it may not fit properly. You can try cutting the end of the line to a sharp point to guide it through the holes, and using tools like needle-nose pliers or hemostat pliers can also help guide the line through. If the line still won't fit, you may need to boil it in water to soften it or use a sealant to secure it in place.

Preventing Fuel Line Issues

To prevent fuel line issues, it's important to use the right type of fuel for your chainsaw. Ethanol-free blends are recommended, as ethanol can cause the fuel lines to loosen or dilate. Additionally, ensure that you are using the correct size fuel lines, as lines that are too big or too small may not fit securely and can lead to leaks.

Fuel Line Maintenance Tips

• Regularly inspect your fuel lines for any signs of damage, wear, or disintegration.
• Keep your fuel lines clean and free of debris.
• Consider using a fuel filter to help maintain the condition of your fuel lines and prevent clogs.
• Store your chainsaw properly when not in use, and always refer to the manufacturer's instructions for maintenance and safety guidelines.

By following these tips and guidelines, you can effectively maintain and replace your chainsaw fuel line, ensuring the optimal performance and longevity of your chainsaw.

Chainsaw fuel line installation

Chainsaw fuel lines can be purchased from a variety of online retailers, including Amazon, Walmart, and eBay. They are also available at Ace Hardware.

Now, onto the installation process.

Before beginning, ensure you are wearing work gloves to protect your hands. It is also important to work in a well-ventilated area.

Prepare the Chainsaw

• Remove the fuel cap and empty the fuel tank into an approved storage container.
• Using an Allen wrench, remove the screws that hold the cylinder shield to the engine, and lift it off.
• Disconnect the spark plug wire and remove the air filter cover and filter.
• Straighten a piece of coat hanger and bend a hook on one end. Feed it through the mouth of the tank to remove the cylindrical fuel filter. Cut the fuel line if necessary.
• Using a 7/16-inch socket driver, remove the two mounting nuts that secure the carburetor to the engine.
• Pull the carburetor from the engine block, being careful not to bend the throttle linkage or damage the gas lines.

Install the New Fuel Lines

• Cut the new fuel lines at an angle to thread them into the tank. Use scissors or a sharp tool to create a sharp, long point at the end of the line.
• Push the large line about one inch into the tank.
• Push the small line into the tank and grab it through the mouth of the tank with needle-nose pliers. Pull the line out, cut the end square, and install the fuel filter.
• Pull the line back into the tank so that the filter rests at the bottom.
• Trim the fuel lines and connect them to the carburetor.

Reassemble the Chainsaw

• Slip the carburetor onto the mounting studs and push it into place.
• Position the air filter housing and replace the mounting nuts, tightening them to seal the gasket between the engine and carburetor.
• Reinstall the air filter cover and connect the spark plug wire.
• Reinstall the cylinder shield.
• Refill the fuel tank.

Note: It is recommended to take digital photos of the throttle linkage and gas line connections for accurate reassembly. Additionally, lubricating the fuel lines with a drop of oil can ease threading.

Some additional tips and tricks for installing fuel lines:

• Try using hemostat pliers, which are perfect for getting into tight spaces. You can also slip short pieces of rubber tubing over the tips of the pliers to avoid damaging the fuel lines.
• Cut the fuel line in half vertically and pull it through with pliers. You may need to poke the uncut side with a screwdriver while pulling.
• If the fuel line is too stiff, try leaving it in boiling water for a while to soften it.
• If the line is still difficult to thread, you can use a thin piece of wire attached to a key ring. Thread the wire through the hole, attach the fuel line to the wire, and pull it through.

Remember to always exercise caution when working with power tools and equipment.

Chainsaw fuel line removal

Chainsaw fuel lines can clog, crimp, or crack over time, causing issues with the fuel flow and preventing the engine from starting. If you're having trouble getting your chainsaw to start, you may need to remove and replace the fuel lines. Here's a step-by-step guide on how to do it:

Step 1: Prepare the Chainsaw

• Put on work gloves to protect your hands.
• In a well-ventilated area, remove the fuel cap and empty the fuel tank into an approved storage container.
• Using an Allen wrench, remove the screws that hold the cylinder shield to the engine, and lift it off.
• Disconnect the spark plug wire and remove the air filter cover and filter.

Step 2: Remove the Old Fuel Lines

• Straighten a coat hanger and bend a hook on one end. Insert it into the mouth of the tank to remove the white cylindrical fuel filter. Cut the fuel line to take out the filter.
• Using a socket driver, remove the mounting nuts that secure the carburetor to the engine.
• Pull the carburetor from the engine block, being careful not to bend the throttle linkage or damage the gas lines.
• Take pictures of the throttle linkage and gas line connections for accurate reassembly.
• Pull the fuel lines off the carburetor and primer bulb using needle-nose pliers.
• If necessary, remove the screws from the primer bulb to detach the fuel lines completely.

Step 3: Install the New Fuel Lines

• Cut the new fuel lines at an angle to help thread them into the tank.
• Push the large line about an inch into the tank.
• Pull the small line out through the mouth of the tank using needle-nose pliers.
• Cut the end of the small line square and install the fuel filter.
• Pull the small line back into the tank so that the filter rests at the bottom.
• Trim the fuel lines and connect them to the carburetor.

Step 4: Reassemble the Chainsaw

• Slip the carburetor onto the mounting studs and secure it with the mounting nuts.
• Reinstall the air filter and cover, and reconnect the spark plug wire.
• Reinstall the cylinder shield.
• Refill the fuel tank.

Note: It's important to follow the instructions specific to your chainsaw model and always wear the necessary safety equipment when performing repairs.

Frequently asked questions