Replacing The Fuel Pump In Your 2009 Ford Escape

The fuel pump in a car is responsible for delivering gas from the fuel tank to the fuel injectors. The pump delivers the right amount of fuel and maintains enough pressure to keep the engine running smoothly. The fuel pump in most cars is powered by an electric motor and can be located either inside or outside the fuel tank. The fuel pump in the 2009 Ford Escape is located inside the fuel tank. Replacing the fuel pump in a 2009 Ford Escape can cost between \$561 and \$729, excluding taxes and fees. The labour costs are estimated to be between \$123 and \$155, while the parts are priced between \$437 and \$574.

Disconnect the battery

Disconnecting the battery is the first step in replacing the fuel pump on a 2009 Ford Escape. This is because working with the fuel system is dangerous and disconnecting the battery reduces the chance of a fire.

There are two ways to access the battery on a 2009 Ford Escape. One way is to take the windshield wiper cowl off and go from the top. The other way is to take the air intake box out and go through the front. Taking the airbox off is easier than removing the cowl, and it is still hard to get to the negative terminal if you go this route. If you choose to remove the cowl, you will need to remove the wipers and the cowl that is under them. This involves removing four bolts and some clips, and it comes off in two separate pieces.

When disconnecting the battery, be careful of the battery sensor that is hooked up to the negative terminal. Double-check everything while you have the battery off. Also, make sure to reset the battery management system after the battery is changed.

Remove the access cover

To remove the access cover of your 2009 Ford Escape, start by disconnecting the battery to reduce the chance of a fire. Next, drain the fuel from the tank. Depending on the model of your car, the fuel pump will either be inside or outside the fuel tank.

If your fuel pump is inside the fuel tank, there will be an access cover that needs to be removed. With the cover off, you will be able to access the fuel pump and pre-pump filter screen for replacement.

If your fuel pump is outside the tank, you will need to disconnect the fuel lines before removing and installing the new pump.

Remember to take all necessary precautions when working with the fuel system to prevent fires.

Replace the pump and pre-pump filter screen

To replace the pump and pre-pump filter screen on a 2009 Ford Escape, the first step is to disconnect the battery to reduce the chance of a fire. Next, locate the pump. If the pump is inside the fuel tank, remove the access cover. In some cases, you will need to drain the fuel before removing the access panel. With the cover off, the pump and pre-pump filter screen can be replaced. If the pump is outside the tank, disconnect the fuel lines, then remove and replace the pump. Once the pump is replaced, check for any fuel leaks.

It is recommended that fuel filters are replaced at the same time as the fuel pump. This includes the intake screen for in-tank fuel pumps. Additionally, the fuel pump relay is known to fail on some vehicles, so it is good practice to replace the relay when the pump is replaced.

Working with the fuel system is dangerous, so take all necessary precautions to prevent fires. Once the repair is complete, be on the lookout for fuel leaks or odors. If you notice any issues, do not start or drive the car, and do not park inside a structure. Instead, have the car towed to a shop for inspection and repair.

Check for fuel leaks

When replacing the fuel pump on a 2009 Ford Escape, it is important to check for fuel leaks. Fuel leaks can be dangerous and can lead to fires, so it is crucial to take all necessary precautions.

After replacing the fuel pump, inspect the area around the fuel pump for any signs of leakage. Look for any wet spots, drips, or puddles of fuel. If there is fuel present, it indicates a leak.

If there is no visible leak, you can perform a pressure test to check for any leaks in the fuel system. This involves pressurizing the system and monitoring for any drops in pressure, which could indicate a leak.

Additionally, you can perform a visual inspection of the fuel lines, hoses, and connections. Look for any cracks, damage, or signs of wear and tear. If any issues are found, the relevant components should be replaced.

It is also recommended to replace the fuel filters at the same time as the fuel pump. This can help prevent future issues and ensure the fuel system is in optimal condition.

If you notice any fuel odours or signs of leakage after the repair, do not attempt to start or drive the vehicle. Contact a professional mechanic or have the vehicle towed to a repair shop for further inspection and repairs.

Leave it to the professionals

Replacing a fuel pump on a 2009 Ford Escape is not a job for the amateur mechanic. While it might be tempting to save money on repair costs by doing this job yourself, it is a complex and potentially dangerous task that should only be undertaken by those with extensive experience in car repairs.

The fuel pump is an essential component of your car's engine, delivering fuel from the tank to the fuel injectors at the right pressure to keep the engine running smoothly. A failing fuel pump will not create enough pressure in the fuel system, causing a loss of engine power or even preventing the car from starting. Other symptoms of a bad fuel pump include a whining noise from the fuel tank, difficulty starting the car, slow acceleration or lack of power, misfires and stalling, and the check engine light coming on.

If you notice any of these symptoms, it is important to get your car checked out by a professional mechanic. They will be able to diagnose the issue and determine if the fuel pump needs to be replaced. The process of replacing a fuel pump involves disconnecting the battery, removing an access cover to get to the pump, and, in some cases, draining fuel before removing the access panel. It is a labour-intensive process that can take several hours to complete, and it is important to take all necessary precautions to prevent the risk of fire when working with the fuel system.

The average cost for a 2009 Ford Escape Fuel Pump Replacement is between $561 and $729, including labour and parts. While this may seem expensive, it is important to remember that a fuel pump is a critical component of your car's engine, and replacing it with a professional mechanic will ensure the job is done safely and correctly.

Frequently asked questions