Replacing Fuel Pump In Honda Element: Step-By-Step Guide

The fuel pump is an essential component of your car, delivering gas from the fuel tank to the fuel injectors to keep the engine running smoothly. A faulty fuel pump can cause a host of issues, including engine stalling, poor fuel economy, and poor vehicle performance. If you own a Honda Element and suspect that your fuel pump needs replacing, it's best to leave this job to the professionals due to the risk of fire. The average cost for a Honda Element Fuel Pump replacement is between $1,063 and $1,207, with labour costs estimated between $44 and $56.

To replace the fuel pump, a technician will first disconnect the battery to reduce the chance of a fire. They will then need to remove an access cover to reach the pump if it is located inside the fuel tank, which is usually the case for most cars. With the cover off, the technician can replace the pump and pre-pump filter screen. In some instances, fuel will need to be drained before removing the access panel. If the pump is outside the tank, the mechanic will disconnect the fuel lines, remove the pump, and install a new one. Once the pump is replaced, a final check will be done to ensure there are no fuel leaks.

Disconnect the battery

Disconnecting the battery is the first step in replacing the fuel pump in a Honda Element. This is a crucial safety precaution to reduce the chance of a fire occurring during the procedure.

To begin, locate the battery in your Honda Element. It is usually found in the engine bay, near the front of the vehicle. Once you have located the battery, you will need to identify the negative terminal, which is typically marked with a "-" symbol or a black cover. This is the terminal that you will need to disconnect.

Before disconnecting the battery, ensure that you have the necessary tools, such as a wrench or socket that fits the terminal bolt securely. You may also want to wear protective gear, such as gloves and eye protection, to shield yourself from any potential hazards. It is also recommended to have a plan for securing or lowering the vehicle's windows, as power accessories will not function once the battery is disconnected.

Once you are ready, use your wrench or socket to loosen the bolt that secures the negative battery cable to the terminal. Be careful not to touch any metal surfaces with the wrench or socket, as this could create a spark and cause an explosion. After the bolt is loosened, carefully remove the cable from the terminal. Ensure that the cable does not touch any metal surfaces that could create a spark.

Now that the battery is disconnected, you can proceed with the next steps in replacing the fuel pump, which may include relieving fuel pressure, removing the fuel tank cap, and accessing the fuel pump assembly. Remember to exercise caution and follow established safety procedures throughout the entire process.

Remove the fuel tank cap

To remove the fuel tank cap on a Honda Element, you will need to relieve the fuel pressure. This is an important first step to ensure safety.

Next, you will need to remove the centre console, both track floor covers, and both sill trims. This will give you access to the floor covering, which you will need to fold back until you can access the fuel tank cap.

Once you have exposed the fuel tank cap, you can then proceed to remove it. It is important to note that working with the fuel system can be dangerous, so ensure all necessary precautions are taken to prevent any potential hazards, such as a fire.

Remove the centre console, floor covers, and sill trims

To remove the centre console, floor covers, and sill trims of your Honda Element, you will need to first relieve the fuel pressure and remove the fuel tank cap. Then, you can start removing the centre console. You will also need to remove both track floor covers and both sill trims.

Once you have removed these components, you will need to fold back the floor covering until you can access the access panel. Remove this access panel from the floor. Now that you have exposed this area, you can begin to disconnect components relating to the fuel pump.

Fold back the floor covering to access the fuel pump

To fold back the floor covering of your Honda Element to access the fuel pump, you will first need to relieve the fuel pressure and remove the fuel tank cap. Next, remove the centre console, both track floor covers, and both sill trims. Then, fold back the floor covering until you can access the access panel. This will be located under the rear seats, under the floor mat. Once you have located the access panel, you can remove it to access the fuel pump.

Disconnect the fuel pump connector

To disconnect the fuel pump connector, you will need to relieve the fuel pressure and remove the fuel tank cap. Then, remove the centre console, both track floor covers, and both sill trims. Fold back the floor covering until you can access the access panel. Remove the access panel from the floor, then disconnect the fuel pump 5P connector.

To relieve the fuel pressure, make sure to refer to your Honda Element's manual or consult a professional. This is a crucial step to ensure safety when working on any fuel-related components in your vehicle.

Once the fuel pressure is relieved, you can proceed to remove the fuel tank cap. This will allow you to access the necessary components and begin the process of disconnecting the fuel pump connector.

After removing the centre console, both track floor covers, and both sill trims, you will need to fold back the floor covering to access the access panel. This panel is usually located under the rear seats or under the driver's seat. Make sure to set aside any screws or fasteners removed during this process in a safe place so that you can reassemble everything correctly later.

With the access panel exposed, use the appropriate tool to remove it. The access panel should provide clear access to the fuel pump and its connector. Identify the fuel pump 5P connector and proceed to disconnect it carefully. Ensure that you do not force the disconnection, as this may damage the connector or surrounding components.

At this point, the fuel pump connector should be successfully disconnected. You can now continue with the next steps in the fuel pump replacement process for your Honda Element. Remember to work carefully and consult a professional or the repair manual if you have any doubts during the process.

Frequently asked questions