Sylvie Willis
Replacing the fuel filter on a Pontiac Sunfire is a straightforward task that can be completed with a few simple tools. The fuel filter is located underneath the car, on the passenger's side of the fuel tank. To replace it, you will need to raise the rear of the car with a floor jack and support the weight with jack stands. You will then need to remove the old filter by spraying the nut with penetrating oil and using a 16mm wrench and an adjustable wrench to secure the filter and remove the nut. Be careful, as some gas will come down from the fuel line.
| Characteristics | Values |
|---|---|
| Tools needed | 16mm and 19mm wrenches or two adjustable wrenches |
| Location of fuel filter | Underneath the car, above the rear axle on the passenger's side of the fuel tank |
| First step | Spray the nut with penetrating oil |
| Second step | Use a 16mm wrench and an adjustable wrench to secure the filter and remove the nut |
| Third step | Have a catch pan to collect any fuel spillage |
| Fourth step | Unplug the filter from the other hose |
| Fifth step | Connect the filter to the hose and clip the filter into the clamp style mount |
| Sixth step | Use your wrenches to tighten the nut |
Explore related products
What You'll Learn
Locating the fuel filter
To locate the fuel filter on a Pontiac Sunfire, you will need to lift the rear of the car with a floor jack and place one jack stand under each rear axle to support the weight of the vehicle. The fuel filter is a metal cylindrical piece located underneath the car on the passenger's side of the fuel tank, above the rear axle.
Replacing Fuel Lines: 97 Road King Maintenance Guide
You may want to see also
Explore related products
Removing the nut
To remove the nut, you will need to use a 16mm wrench and an adjustable wrench. Spray the nut with penetrating oil and then use the wrenches to secure the filter and remove the nut. Be careful, as some gas will come down from the fuel line.
You will need to raise the back of the Sunfire with a floor jack and support the weight of the vehicle with one jack stand placed under each rear axle. The fuel filter is located underneath the Sunfire on the passenger's side of the fuel tank. It is a metal cylindrical piece.
Make sure you do not apply too much force on the fuel line and that you don't twist it, otherwise you will have to replace it. Place a catch pan underneath to collect any fuel spillage.
Nylon vs Rubber: Safe Fuel Line Substitute?
You may want to see also
Explore related products
Removing the old filter
To remove the old fuel filter from your Pontiac Sunfire, you'll need to start by raising the back of the car with a floor jack. Place one jack stand under each rear axle to support the weight of the vehicle.
The fuel filter is located underneath the car, on the passenger's side of the fuel tank. It's a metal cylindrical piece, and you'll find it above the rear axle.
Spray the nut with penetrating oil and use a 16mm wrench and an adjustable wrench to secure the filter and remove the nut. Be careful, as some gas will come down from the fuel line. Place a catch pan underneath to collect any fuel spillage.
After removing the nut, use a flat-headed screwdriver to pry out the metal clamp that secures the filter. Then, unplug the filter from the other hose.
Replacing Ford's Mechanical Fuel Pump: Step-by-Step Guide
You may want to see also
Explore related products
Connecting the new filter
To connect the new fuel filter, you'll need to press the end of the new fuel filter that has the clip onto the fuel line until the line clicks into place. Then, use a wrench to tighten the end of the other fuel line to the fuel filter.
Make sure you have a catch pan to collect any fuel spillage.
After connecting the new filter, you can lower the Sunfire with the floor jack and remove the wheel chocks to complete the installation.
Replacing the Fuel Pump in a '97 Suburban: A Step-by-Step Guide
You may want to see also
Explore related products
Tightening the nut
To tighten the nut when replacing the fuel filter on a Pontiac Sunfire, you will need to use a 16mm wrench and an adjustable wrench. First, spray the nut with penetrating oil. Then, use the wrenches to tighten the nut. Make sure you do not apply too much force on the fuel line and that you don't twist it, otherwise you will have to replace it.
Replacing the Fuel Pump in Your 2002 BMW 325i: Step-by-Step Guide
You may want to see also
Frequently asked questions
You will need 16 mm and 19 mm wrenches or two adjustable wrenches.
The fuel filter is located underneath the Sunfire, on the passenger's side of the fuel tank, above the rear axle.
Spray the nut with penetrating oil. Use a 16mm wrench and an adjustable wrench to secure the filter and remove the nut. Have a catch pan to collect any fuel spillage.
Press the end of the new fuel filter that has the clip onto the fuel line until the line clicks into place. Then use a wrench to tighten the end of the other fuel line to the fuel filter.
Make sure you do not apply too much force on the fuel line and that you don’t twist it, otherwise you will have to replace it.
