Craftsman Trimmer Fuel Line: Quick Replacement Guide

If you need to replace the fuel line of your Craftsman Trimmer, you can find a variety of replacement parts on Amazon and eBay. The fuel line is an essential component of the trimmer, supplying fuel to the engine. When looking for a replacement, you'll need to ensure it is compatible with your specific Craftsman Trimmer model. Options are available for a range of Craftsman Trimmer models, including the Poulan, Craftman Chainsaw, and String Trimmer Blower.

Craftsman CMXGZAM950074 Fuel Line Repair Kit

The Craftsman CMXGZAM950074 Fuel Line Repair Kit is a comprehensive solution for maintaining your Craftsman 2-cycle and 4-cycle gas-powered tools. This kit is compatible with a range of Craftsman equipment, including the Weedwacker trimmer, blowers, pole saws, cultivators, hedge trimmers, and edgers.

The kit includes a range of essential components for repairing and maintaining your equipment's fuel system. It comes with one large and one small primer bulb, a remote primer bulb assembly, a fuel filter, a fuel filter fitting, a length of low permeation fuel line, an installation tool, and a fuel line connector.

To use this kit effectively, follow these steps:

• Disconnect the fuel source and remove any remaining fuel from your equipment.
• Refer to your equipment's user manual to locate the fuel line assembly and access it safely.
• Inspect the existing fuel line for any damage or wear. Take note of how the fuel line is routed and secured in place.
• Using the appropriate tools, carefully remove the old fuel line, primer bulb, and any other components that need replacement.
• Take the new fuel line from the Craftsman CMXGZAM950074 kit and cut it to the appropriate length, ensuring it matches the original routing.
• Install the new fuel line, primer bulb, and any other replaced components, following the instructions provided with your equipment or seeking guidance from a qualified technician.
• Reattach any fuel line clamps or fasteners securely, ensuring there is no leakage.
• Prime the bulb according to your equipment's instructions, and check for any signs of leakage around the fuel line and connections.
• Once you've confirmed there are no leaks, start your equipment and ensure it's running smoothly.

By following these steps and using the Craftsman CMXGZAM950074 Fuel Line Repair Kit, you can efficiently replace and maintain the fuel line system in your Craftsman 2-cycle and 4-cycle gas-powered tools, ensuring their optimal performance and longevity.

Craftsman Line Trimmer Fuel Line Right Angle Fitting

If you need to replace the fuel line right angle fitting on your Craftsman line trimmer, you can purchase a new part online. The Craftsman 104-ST025.2-020 Line Trimmer Fuel Line Right Angle Fitting is available on eBay for a reasonable price. This part connects two fuel lines and is essential for the fuel system to function properly.

When installing this part, it is important to take the necessary safety precautions. First, allow the engine to cool down completely and disconnect the spark plug wire. It is also recommended to wear work gloves to protect your hands during the installation process.

The Craftsman Line Trimmer Fuel Line Right Angle Fitting is designed to connect two fuel lines, allowing fuel to flow through the system. Over time, the original fuel line may become damaged or cracked, leading to leaks. If you notice any leaks or damage to your fuel line, it is important to replace it as soon as possible to prevent further issues.

By following the instructions provided by the manufacturer and taking the necessary safety precautions, you can successfully replace the fuel line right angle fitting on your Craftsman line trimmer. This will ensure that your trimmer continues to run efficiently and safely.

Craftsman Carburetor with Fuel Line and Gasket

To replace your Craftsman Trimmer's fuel line, you'll need to purchase a replacement carburetor with a fuel line and gasket. This is a relatively easy process that can be done at home with the right tools and parts. Here's a step-by-step guide to help you through the process:

First, make sure you have the correct replacement carburetor for your Craftsman Trimmer model. You can find this information in your owner's manual or by searching for your model number online. Once you have the correct carburetor, gather the necessary tools, including basic hand tools like screwdrivers and wrenches.

Next, locate the fuel tank on your trimmer. You will need to disconnect the fuel lines from the tank and carefully remove any remaining fuel. Be sure to do this in a well-ventilated area and dispose of the fuel safely.

Now, you can start removing the old carburetor. Disconnect any cables or linkages attached to the carburetor, taking note of their positions for reassembly. Carefully remove the old carburetor, making sure to not damage any nearby components.

With the old carburetor removed, it's time to install the new one. Position the new carburetor in place and secure it with the appropriate screws or bolts. Reattach any cables or linkages, ensuring they are in the correct positions.

Finally, attach the new fuel lines to the fuel tank and carburetor. Ensure that all connections are secure and tight to prevent any leaks. Fill the fuel tank with fresh fuel and check for any signs of leakage before starting your trimmer.

By following these steps and using a replacement carburetor with a fuel line and gasket, you can replace your Craftsman Trimmer's fuel line and get back to work in no time. Remember to wear appropriate safety gear and work in a well-ventilated area when handling fuel.

Some replacement carburetor options for Craftsman Trimmers include the HQparts Carburetor & Gasket, which is compatible with the Craftsman 30CC 4-Cycle Gas Trimmer Weedwacker 73197. This product has received positive reviews for its performance and the quality of its fuel lines and filters. Another option is the WS2200 Carburetor Fuel Line Kit, which is suitable for various Craftsman trimmer models, including the WS210, WC-2200, and WS-2400. Always ensure that the replacement carburetor you choose is compatible with your specific Craftsman Trimmer model.

Craftsman Fuel Line & Filter Kit

The Craftsman Fuel Line & Filter Kit is an essential purchase for maintaining your Craftsman machine. The kit includes a fuel line, primer bulb, and fuel filter, which are necessary for the proper functioning of your Craftsman equipment.

The fuel line is a vital component, responsible for delivering fuel from the tank to the engine. Over time, it can become brittle, cracked, or clogged, leading to fuel flow interruption. Replacing the fuel line with a new one from the kit ensures uninterrupted fuel supply, maintaining the performance of your Craftsman machine.

The primer bulb is another critical element in the fuel delivery system. It helps prime the engine with fuel, facilitating a smooth and quick start. A defective primer bulb may fail to deliver the necessary fuel for ignition, causing starting issues. By replacing the primer bulb with the one provided in the kit, you can ensure reliable starting performance.

Additionally, the fuel filter plays a crucial role in maintaining the health of your Craftsman engine. Over time, contaminants can build up in the fuel, and the fuel filter works to trap these impurities, preventing them from entering the engine. A clogged fuel filter can restrict fuel flow and degrade engine performance. Replacing the fuel filter with the one included in the kit ensures that clean fuel reaches the engine, optimizing performance and prolonging engine life.

The Craftsman Fuel Line & Filter Kit is designed to fit a range of Craftsman machines, including chainsaws, string trimmers, blowers, and lawn mowers. With this kit, you can easily replace the essential fuel system components, ensuring the optimal performance of your Craftsman equipment.

Craftsman Fuel Line Hose Tube

If you need to replace the fuel line of your Craftsman trimmer, you can purchase a replacement fuel line kit. The fuel line allows fuel to travel from the fuel tank to the carburetor and from the primer bulb to the fuel system. If the fuel line is leaking, replace it.

There are several Craftsman fuel line kits available, including:

• A fuel line kit with both large and small diameter fuel lines included.
• A large fuel line.
• A small fuel line with a 9/64 (.140) inch OD and a .080-inch ID, which comes with installation instructions.
• A fuel line with 15 inches of 1/4 inch inside diameter hose.
• A fuel line kit with a primer and filter.

When purchasing a replacement fuel line, be sure to select the correct part number for your specific Craftsman model.

To replace the fuel line, follow these steps:

• Purchase the correct replacement fuel line for your Craftsman trimmer.
• Locate the fuel line on your trimmer. It should run from the fuel tank to the carburetor.
• Disconnect the old fuel line from the fuel tank and carburetor.
• Connect the new fuel line to the fuel tank and carburetor, following any included instructions.
• Ensure that the new fuel line is securely connected and not leaking before starting the trimmer.

Frequently asked questions