Replacing A Fuel Pump: Nissan 720 Step-By-Step Guide

If you're experiencing issues with your Nissan 720's fuel pump, you may need to replace it. There are a variety of fuel pumps compatible with the Nissan 720, including the Delphi Fuel Pump, the Carter Mechanical Fuel Pump, and the QFS Electric Fuel Pump. Before replacing the fuel pump, it's important to check for any debris in the fuel tank, as this can cause issues with the fuel pump's performance. It's also recommended to consult a professional or a repair manual for guidance on how to safely and correctly replace the fuel pump in your Nissan 720.

Check for debris in the fuel tank

To check for debris in the fuel tank of your Nissan 720, you will need to remove the fuel tank and inspect it. Here is a step-by-step guide:

• Park your Nissan 720 on a level surface and engage the parking brake.
• Disconnect the negative battery cable with a wrench to prevent any accidental ignition during the process.
• Locate the fuel tank under the vehicle. The fuel tank is typically located at the rear of the vehicle, underneath the trunk or rear seat.
• Place a suitable container under the fuel tank to catch any spilled fuel.
• Disconnect the fuel lines and electrical connections leading to the fuel tank. Label each connection to ensure proper reassembly.
• Carefully lower the fuel tank and remove it from the vehicle. You may need an assistant to help with this step as the fuel tank can be heavy.
• With the fuel tank removed, open the tank and inspect it for any debris, rust, or other contaminants. Use a flashlight to thoroughly examine the inside of the tank.
• If you find any debris, use a clean cloth or brush to remove it. Ensure that the tank is completely free of any foreign objects.
• Reinstall the fuel tank and connect all the fuel lines and electrical connections. Tighten all fittings securely.
• Reconnect the negative battery cable.
• Start the engine and check for any fuel leaks. Ensure that the fuel gauge is functioning correctly.

By following these steps, you can effectively check for and remove any debris from the fuel tank of your Nissan 720. This process will help ensure that your fuel system is free of blockages and contaminants, which can cause performance issues or damage to the fuel pump.

It is important to exercise caution when working with fuel systems. Always allow the vehicle to cool down before starting work and avoid any open flames or sparks. If you are uncomfortable performing this task, it is recommended to seek the assistance of a qualified mechanic.

Check the fuel filter

Checking the fuel filter on your Nissan 720 is an important part of routine maintenance. Here is a step-by-step guide on how to do it:

First, locate the fuel filter. On the Nissan 720, the fuel filter is located near the fuel tank. It is usually found along the fuel line, which runs from the fuel tank to the engine.

Next, you will need to remove the fuel filter for inspection. This process can vary depending on the year and model of your Nissan 720, but it typically involves the following steps:

• Disconnect the negative battery terminal to prevent any accidental sparks.
• Relieve the fuel system pressure by releasing the pressure in the fuel lines. This is an important safety step to prevent fuel spray when you disconnect the fuel lines.
• Place a container under the fuel filter to catch any spilled fuel.
• Disconnect the fuel lines from the filter. Be careful not to damage the O-rings or other components.
• Remove the fuel filter mounting bracket or clamps if applicable.
• Carefully remove the fuel filter.

Once the fuel filter is removed, you can inspect it for any signs of damage, leaks, or clogging. Here are some things to look for:

• Check the exterior of the fuel filter for any cracks, leaks, or damage. If the filter housing is compromised, it will need to be replaced.
• Inspect the O-rings or seals for any signs of damage or deterioration. Replace them if necessary.
• Cut open the fuel filter carefully to examine the filter media. Look for any signs of clogging, debris, or contamination. If the filter media is excessively dirty or clogged, it will need to be replaced.
• Check for water contamination. Water in the fuel can lead to engine issues, so it is important to ensure that the fuel filter is doing its job of separating water from the fuel.

After inspecting the fuel filter, you can decide if it needs to be replaced. If the filter is clogged, damaged, or contaminated, it is important to install a new one. Follow the installation instructions provided with your new fuel filter, and be sure to use compatible parts and fluids.

Remember to dispose of the old fuel filter properly and according to local regulations. Fuel filters contain flammable liquids and hazardous materials, so take them to a designated disposal facility if possible.

Check the fuel lines

When checking the fuel lines of your Nissan 720, there are a few key steps to follow. Firstly, it is important to identify the location of the fuel lines. They are usually situated between the fuel tank and the engine, so start by checking the area around the fuel tank and follow the lines to the engine.

Once you have located the fuel lines, you can begin inspecting them for any signs of damage or wear and tear. Look for cracks, leaks, or any other abnormalities that could indicate a problem. If you notice any debris or dirt buildup on the fuel lines, it is important to clean them to ensure uninterrupted fuel flow. You can use compressed air or a specialised cleaning solution to remove any debris or buildup.

After inspecting and cleaning the fuel lines, you should also check the fuel filter. The fuel filter is responsible for removing impurities from the fuel before it enters the engine. A clogged fuel filter can restrict fuel flow and cause problems similar to those of a faulty fuel pump. Refer to your Nissan 720's manual to locate and replace the fuel filter if necessary.

In some cases, the fuel lines may be damaged internally, which can be more difficult to identify. If you suspect internal damage, it is recommended to replace the fuel lines entirely. This is a more involved process and may require the assistance of a qualified mechanic. They will have the necessary tools and expertise to replace the fuel lines correctly.

Finally, it is important to check for any signs of fuel leaks after you have completed the replacement of the fuel pump. Leaks can be dangerous and should be addressed immediately. Ensure that all connections are secure and that there is no fuel dripping or pooling anywhere along the fuel lines.

Check the fuel pump relay

To check the fuel pump relay on a Nissan 720, start by locating the relay in the fuse box. The relay will be labelled, so you can easily identify it. Once you've found it, you can perform a simple test to check if it's working. Start by turning the ignition key to the 'on' position, but don't start the engine. You can then listen for a faint clicking sound coming from the relay—this indicates that it's working. If you don't hear the clicking sound, this could mean that the relay is faulty and needs to be replaced.

Another way to check the fuel pump relay is to use a multimeter to test for voltage and resistance. With the ignition off, disconnect the electrical connector from the relay and set your multimeter to test for resistance. Place the multimeter probes on the connector terminals and check the reading. A reading of 50-100 Ohms indicates a functioning relay, while a reading of 0 Ohms or "OL" indicates a short circuit. If the reading is infinite Ohms, the circuit is open, and the relay is faulty.

You can also test for voltage at the relay with the ignition on. Connect the multimeter probes to the battery feed and ground terminals on the relay connector. A reading of 12 volts indicates that the relay is receiving power, while a reading of 0 volts means there is no power. If the relay is not receiving power, check the fuse and wiring for any issues.

If your Nissan 720 is experiencing fuel pump issues, it's important to check the relay as it could be the cause of the problem. A faulty relay can prevent the fuel pump from receiving power, leading to fuel delivery issues and engine performance problems. By performing these simple tests, you can determine if the fuel pump relay is functioning correctly and replace it if necessary.

Check the fuel pump assembly

To check the fuel pump assembly of your Nissan 720, you can start by locating the fuel pump relay in the fuse box. Refer to your owner's manual to find the exact location of the relay and how to test it. The fuel pump relay is a small part that tells the fuel pump when to turn on and off, so if it's not working properly, your fuel pump may not work either.

Another way to check the fuel pump assembly is to test the fuel pressure. You can do this by connecting a fuel pressure gauge to the fuel rail and turning on the engine. Check the pressure reading on the gauge; if it's too low, it could indicate an issue with the fuel pump. You can find the correct fuel pressure for your Nissan 720 in the owner's manual.

Additionally, you can listen for the fuel pump when you turn on the car. Put the key in the ignition and turn it to the "on" position without starting the engine. Listen carefully for a humming noise coming from the gas tank area. If you don't hear anything, it could be a sign that the fuel pump is not functioning properly.

If you suspect a problem with your fuel pump, it's important to address it promptly. A faulty fuel pump can cause issues such as engine stalling, increased fuel consumption, and difficulty starting the engine. Additionally, regular maintenance and replacement of the fuel pump assembly can help ensure the optimal performance and longevity of your Nissan 720.

Frequently asked questions