Jettisoning Fuel Tanks In Dcs: A Step-By-Step Guide For The Fa-18C

how to jettison fuel tanks dcs fa18c

The F/A-18 Hornet is a high-fidelity combat flight simulation plane that does not have a single button for jettisoning fuel tanks. To drop the fuel tanks from the F/A-18 Hornet, you must first select the station you want to drop (CTR, LI, LO, RI, or RO). Then, use the Select Jett knob to choose what you want to drop from the selected station. Next, turn the Master Arm on, and push the red Jett button to drop the selected items. Finally, dial Select Jett back to Safe and secure the Master Arm. If you want to jettison stations 4 and/or 6, you don't need to select the stations first. Instead, dial Lfus / Rfus on the Select Jett Knob and follow the same steps as above. Alternatively, you can perform an emergency jettison, which will drop all tanks and air-to-ground munitions but not your missiles.

shunfuel

Emergency jettison: Drop all tanks and air-to-ground munitions, but not missiles

To perform an emergency jettison in the F/A-18 Hornet, which will drop all tanks and air-to-ground munitions but not missiles, follow these steps:

  • Ensure the Master Arm is on.
  • Press and hold the emergency jettison button, often located in the lower left near your left knee and the fuel panel. This will drop all tanks and air-to-ground munitions.
  • Dial "Select Jett" back to "Safe" and secure the Master Arm.

Note that the exact location of the emergency jettison button may vary depending on the aircraft and panel configuration. It is recommended to refer to the aircraft's manual or Chuck's Guide for specific instructions.

Additionally, it is important to be aware that the emergency jettison procedure may vary slightly between different versions or configurations of the F/A-18 Hornet.

shunfuel

Location of the emergency jettison button: Left knee area, near the fuel panel

The location of the emergency jettison button in the F/A-18 Hornet is in the lower left area, near the pilot's left knee and the fuel panel. It is not a single button, and the procedure to jettison fuel tanks is as follows:

  • Select the station(s) you want to drop (CTR, LI, LO, RI, RO). The Hornet only carries fuel on either CTR, LI and/or RI.
  • Use the "Select Jett" knob to select what you want to drop on the selected station(s) (Rack/Lchr or Stores).
  • Turn the Master Arm ON.
  • Push the red "Jett" button to drop the selected items.
  • Dial "Select Jett" back to "Safe" and secure the Master Arm.

If you want to jettison stations 4 and/or 6, you don't need to select stations first. Instead, dial "Lfus" / "Rfus" on the "Select Jett" Knob and proceed as mentioned above.

The emergency jettison button will drop all tanks and air-to-ground munitions, but it will not drop your missiles.

The location and procedure for the emergency jettison button and fuel tank jettison are important to know for pilots of the F/A-18 Hornet.

shunfuel

Master Arm must be on before jettisoning

To jettison the fuel tanks from the F/A-18C in DCS, you must first ensure that the Master Arm is turned on. The Hornet is not a low-fi plane, so you will not have a single button to press to jettison the fuel tanks. Instead, you will have to follow a selective jettison procedure.

Firstly, you must select the station you want to drop. The C Hornet only carries fuel on either CTR, LI and/or RI. You can then use the "Select Jett" knob to choose what you want to drop on that selected station, such as Rack, Lchr, or Stores.

Once you have made your selections, you must then ensure the Master Arm is turned on. After this, you can push the red "Jett" button to drop your selected items. Finally, dial "Select Jett" back to "Safe" and secure the Master Arm.

If you want to jettison stations 4 and/or 6, you don't need to select stations first. Instead, dial "Lfus" / "Rfus" on the "Select Jett" Knob and then follow the rest of the procedure as outlined above.

It is important to note that the emergency jettison function will drop all of your A/G weapons and fuel tanks, but it will not drop your missiles.

shunfuel

Selective jettison procedure: Select station, use Select Jett knob, then push the red Jett button

The Hornet does not have a single button to jettison fuel tanks. Instead, you must follow the selective jettison procedure:

Firstly, select the station you want to drop (CTR, LI, LO, RI, or RO). The C Hornet only carries fuel on either CTR, LI, and/or RI. Next, use the "Select Jett" knob to select what you want to drop on that selected station (Rack/Lchr or Stores). You should select the station or Arm after you rotate the knob to avoid accidentally jettisoning something else.

Then, turn the Master Arm ON. Finally, push the red "Jett" button to drop the selected item. After this, dial "Select Jett" back to "Safe" and secure the Master Arm.

If you want to jettison stations 4 and/or 6, you don't need to select stations first. Instead, dial "Lfus" / "Rfus" on the "Select Jett" Knob and proceed as mentioned above.

shunfuel

Select Jett knob: Dial to Safe after dropping selected tanks

To jettison fuel tanks from the F/A-18C, you must first select the station you want to drop (CTR, LI, LO, RI, RO). The C Hornet only carries fuel on either CTR, LI and/or RI.

Next, use the "Select Jett" knob to select what you want to drop on the selected station(s) (Rack/Lchr or Stores).

Then, turn the Master Arm on.

After that, push the red "Jett" button to drop the selected tank.

Finally, dial the "Select Jett" knob back to "Safe" and secure the Master Arm.

If you want to jettison stations 4 and/or 6, you don't need to select stations first. Instead, dial "Lfus" / "Rfus" on the "Select Jett" knob and follow the same procedure as above.

It is important to note that the emergency jettison button will drop all tanks and air-to-ground munitions, but not your missiles.

Frequently asked questions

Written by
Reviewed by
Share this post
Print
Did this article help you?

Leave a comment