Mercedes Mullins
If you need to drain the fuel tank of a 2005 Durango, you're not alone. Many people have reported issues with their 2005 Durango fuel tanks, including spillback and theft of the entire fuel pump assembly. The fuel system is sealed, so the gas may not be bad, but if you need to drain it, you can try siphoning it out of the filler tube, although some people have reported difficulties with this method. You could also try removing the fuel inlet hose from the tank and feeding in a siphon hose, or jumping the fuel pump relay and disconnecting the fuel supply line to lengthen it and reach a container. If you're having trouble, a mechanic should be able to help.
| Characteristics | Values |
|---|---|
| Vehicle Model | 2005 Dodge Durango 5.7 Hemi |
| Problem | Fuel filling issue, fuel spillback issue, bad gas |
| Solution | Purchase a fuel tank inlet check valve repair kit, siphon gas out of the filler tube |
| Parts | Fuse, jumper, straight pin, fuel pump feed wire |
| Cost | $250 |
Explore related products
What You'll Learn
Siphoning gas from the filler door tube
Disclaimer: Please note that siphoning gas can be dangerous and is illegal in some areas. Always use caution and follow proper safety procedures. It is also crucial to respect other people’s property and never attempt to siphon gas without their permission.
Step 1: Understand the Risks and Alternatives
Firstly, it is important to recognize that siphoning gas can be risky and potentially dangerous. Modern gas spouts often have blocks in place to prevent siphoning, and attempting to bypass these measures can damage your vehicle. Additionally, consider if there are any alternative options available to you, such as transferring fuel from another vehicle or seeking professional assistance.
Step 2: Gather the Necessary Tools and Materials
Before starting the siphoning process, ensure you have the right tools and equipment. You will need a length of tubing that is long enough to reach from the filler door tube to a container on the ground. This tubing should be thin enough to fit securely into the filler tube. You will also need a container to hold the drained gas, a pair of pliers, and possibly a small air compressor or bike pump if you plan to use the air pressure method.
Step 3: Locate the Filler Door Tube and Insert the Tubing
Locate the filler door tube, which is typically found near the rear wheels of the car. Insert one end of the tubing into the filler door tube, ensuring that it is securely in place and reaches the bottom of the gas tank.
Step 4: Start Siphoning
There are two common methods for siphoning gas: manual siphoning and air pressure siphoning.
- Manual Siphoning: This method involves creating a suction effect to draw the gas out of the tank. Place the other end of the tubing into your container and use your mouth to create suction at the start of the tube. Be extremely cautious if you choose this method, as it can be harmful to your health.
- Air Pressure Siphoning: This method uses air pressure to force the gas out of the tank. Insert the other end of the tubing into a container and use a small air compressor or bike pump to create pressure in the container. However, be very careful when using this method, as too much pressure can cause the gas tank to rupture or explode.
Step 5: Stop the Flow and Dispose of the Gas Properly
Once you have siphoned enough gas, remove the tubing from the filler door tube and allow any remaining gas to drain into the container. Use the pliers to crimp the tubing and stop the flow of gas. Properly dispose of the drained gas according to local regulations and safety guidelines.
Remember to exercise extreme caution throughout the entire process, and if you are unsure or uncomfortable at any point, it may be best to seek professional assistance or explore alternative options for draining the gas tank of your 2005 Durango.
Connecting Boat Fuel Tanks: A Guide to Linking Them Together
You may want to see also
Explore related products
Jump the fuel pump relay
If you are looking to jump the fuel pump relay of your 2005 Durango, there are a few methods you can try. Firstly, it is important to note that the 2011-2013 models of the Dodge Durango are likely to have an external fuel pump relay installed, while other models may not. If your vehicle does have an external relay, you can try removing it from the wire harness and jumping pins 30 and 87 to provide full-time power to the fuel pump.
Alternatively, if you are experiencing issues with your fuel pump not receiving power, you can try running a jumper wire from the connector by the tank to the battery. Look for the wire with a dark blue and orange stripe that runs into and out of the connection, as this is the fuel pump feed wire. Slip a straight pin along the wire to make contact, and then connect the jumper to the positive post of the battery. You can purchase a suitable fuse and jumper from any auto parts store.
If you are still having issues with your fuel pump, there are a few other potential causes to consider. These include a blown fuse, impact sensor activation, engine control unit (ECU) issues, or a clogged fuel filter. Additionally, common causes of fuel pump relay failure include current overload, short circuits, and defective internal components.
Connecting a Fuel Transfer Tank to Your Truck's Fuel Tank
You may want to see also
Explore related products
Using a straight pin to make contact with the fuel pump feed wire
To drain the fuel tank of a 2005 Durango, you will need to locate the fuel pump feed wire. This is identified by its dark blue/orange stripe. Once you have found this wire, you can make contact with it by slipping a straight pin along it.
First, locate the connector by the tank. This is where you will find the fuel pump feed wire. Look for a wire with a dark blue/orange stripe that runs into and out of the connector. This wire feeds the pump. Once you have identified the correct wire, you can move on to the next step.
Take a straight pin and carefully slip it in along the wire. Ensure that the pin makes contact with the wire inside the connector. This is important as it will allow you to connect the jumper wire to the fuel pump feed wire. You may need to gently adjust the pin to ensure a good connection.
Now that the straight pin is in place, you can connect the jumper wire. The jumper wire should be long enough to reach from the connector by the tank to the battery. You can purchase a suitable fuse and jumper wire from any auto parts store. Simply explain what you are doing, and they will be able to assist you in choosing the correct parts.
Once you have the jumper wire, connect one end to the straight pin. The other end of the jumper wire should be connected to the positive post of the battery. This will allow you to bypass the fuel pump relay and drain the fuel tank.
By following these steps, you can safely and effectively drain the fuel tank of your 2005 Durango.
Merging Fuel Tanks: A Guide to Efficient Conversion
You may want to see also
Explore related products
Buying a fuel tank inlet check valve repair kit
If you are looking to buy a fuel tank inlet check valve repair kit for your 2005 Durango, there are a few things to keep in mind. Firstly, it is important to understand the issue you are facing with your fuel tank. Some common problems with the 2005 Durango fuel tank include difficulty in siphoning gas from the filler door tube, fuel leakage, and fuel spit back during refueling.
To address these issues, you may consider purchasing a fuel tank inlet check valve repair kit. This kit typically includes a replacement check valve and other necessary components to fix the fuel tank inlet. When buying a repair kit, ensure that it is compatible with your vehicle's specific make and model. In this case, look for kits specifically designed for the 2005 Durango or similar SUV models.
One option for purchasing a fuel tank inlet check valve repair kit is through online retailers like Amazon. Amazon offers kits such as the FUEL TANK INLET ROLLOVER CHECK VALVE REPAIR KIT, which is suitable for SUVs, trucks, and cars. This particular kit features an aluminum check valve and has received positive reviews from customers. It is important to read reviews and compare prices to ensure you are getting a high-quality product.
Additionally, it is worth noting that there have been recalls for the 2005 Durango related to fuel tank issues. Before purchasing a repair kit, check with your local dealer to see if your vehicle is covered under any recalls or warranties. This information can be found using your vehicle's VIN number. If your vehicle is eligible for a recall repair, the dealer may replace the fuel tank assembly free of charge.
Finally, consider the cost and ease of installation when purchasing a fuel tank inlet check valve repair kit. Some kits may require professional installation, adding to the overall cost. However, by carefully reviewing your options and seeking advice from automotive experts, you can make an informed decision that best suits your needs and budget.
Cutting Open an Old Fuel Tank: The Safe Way
You may want to see also
Explore related products
Removing the fuel tank completely
To remove the fuel tank completely from a 2005 Durango, you will need to first drain the tank. You can do this by removing the fuel inlet hose from the tank and feeding in a siphon hose. If you have help, you could remove the bed bolts and slide the bed back. Alternatively, you could jump the fuel pump relay and disconnect the fuel supply line, lengthening it to reach a container to hold the drained fuel.
Once the tank is drained, you can disconnect the battery and then disconnect the lines going to the fuel pump assembly. These are accessible from under the passenger's side, right in front of the rear tire. Next, disconnect the electrical connection to the fuel pump assembly.
Now, you can prop up the gas tank and remove the two straps holding the tank in place. There is a single bolt for each strap. At this point, you can carefully lower the tank. One source recommends blocking up the rear of the tank with a 4"x4" piece of wood so that you can lower it far enough to gain access from the side.
Finally, with the tank lowered, you can reach around and remove the filler neck. Now, the fuel tank has been completely removed.
Dissolving Diesel Sludge: Cleaning Your Fuel Tank
You may want to see also
Frequently asked questions
There are a few ways to go about this. You can try to siphon the gas out of the filler tube, but this may not work. Another option is to remove the fuel inlet hose from the tank and feed in a siphon hose. If you have help, you can also remove the bed bolts and slide the bed back, or you can jump the fuel pump relay and disconnect the fuel supply line.
This was a busy topic at the time, so there are many threads on this issue. You can try to get the needed repairs done for a few hundred dollars, or even for free. You can also purchase a fuel tank assembly for a low price.
First, make sure it will start if you supply the fuel. A shot of starting fluid or propane will let you check. If it does, you need to check the fuel pressure. You can also try to clear it out by putting in HEET and clean gas.
