Adjusting Your Nike Fuel Band: A Step-By-Step Guide

The Nike+ FuelBand was an activity tracker worn on the wrist that allowed its wearers to track their physical activity, steps taken daily, and amount of energy burned. The information from the wristband was integrated into the Nike+ online community and phone application, allowing wearers to set their own fitness goals, monitor their progression, and compare themselves to others in the community. The Nike+ FuelBand comes in three different sizes – small, medium and large. The band can be adjusted to make the fit looser or tighter. The LED display on the band lets you view results, check progress and access advanced features with the press of a button. The Nike+ FuelBand is water-resistant, but not waterproof, so it cannot be used for swimming.

How to connect your Nike FuelBand to your phone via Bluetooth

To connect your Nike FuelBand to your phone via Bluetooth, you will first need to download and install the Nike+ Connect app on your computer. Visit nikeplus.com/setup to do this. After installing and launching the app, connect your FuelBand to your computer by plugging it directly into your USB port or using the provided USB cable and dock. If a firmware update is available, you will be prompted to update before continuing.

Once your FuelBand is plugged in and updated, the Connect app will recognize it, and you will be prompted to enter your current weight, height, and wrist you'll be wearing the band on. You will also be asked to set your daily activity goal and sign up for a Nike+ account, which is required to track your activity, goals, and progress.

After completing the setup, you will need to download and install the Nike+ FuelBand app on your iPhone from the App Store. Hold down the button on your FuelBand until the Bluetooth icon appears, then release and press the button again. The icon should start blinking, indicating that the FuelBand is now discoverable.

Now, you can pair the FuelBand with your iPhone as you would with any other Bluetooth accessory. Once paired, launch the app and sign in to your Nike+ account to finish the setup process.

Please note that the Nike+ FuelBand application is only compatible with iOS 7.1+ devices.

How to sync your Nike FuelBand with your Nike+ account

To sync your Nike FuelBand with your Nike+ account, you will first need to download and install the Nike+ Connect app on your computer. Visit nikeplus.com/setup to do this. After installing and launching the app, connect your FuelBand to your computer either by plugging it directly into your USB port or using the USB cable and dock provided. If a firmware update has been released for the band, you will be prompted to update before continuing.

Once your FuelBand is plugged in and updated, the Connect app will recognize it and your browser will launch. You will then be prompted to enter your current weight and height, as well as which wrist you'll be wearing the band on. You will also be asked to set your daily activity goal. Finally, you'll need to sign up for a Nike+ account, which is required to track your activity, goals, and progress.

If you have an iPhone, you will also need to set up the FuelBand to sync with your phone. Download and install the app from the App Store. Hold down the button on your FuelBand until you see the Bluetooth icon, then let go and press the button again. The icon should start blinking, indicating that the FuelBand is now discoverable. You can now pair the band with your iPhone as you would with any other Bluetooth accessory. Once they're paired, launch the app again and sign in to your Nike+ account to finish the setup process.

How to adjust your daily goal on your Nike FuelBand

The Nike+ FuelBand is an activity tracker worn on the wrist that allows its wearers to track their physical activity, steps taken daily, and amount of energy burned. The information from the wristband is integrated into the Nike+ online community and phone application, allowing wearers to set their own fitness goals, monitor their progression, and compare themselves to others.

To adjust your daily goal on your Nike FuelBand, you can follow these steps:

Using the Nike+ Connect Software

• Open the Nike+ Connect software on your computer.
• Navigate to the "Daily Goal" section within the software.
• Increase or decrease your daily activity goal as desired.

Using the Nike+ FuelBand Mobile Application

• Open the Nike+ FuelBand mobile app on your device.
• Go to the "Me" section of the app.
• Tap on "Settings".
• Select "Daily Goal".
• Adjust your daily activity goal to your preferred level.

By following these steps, you can customize your daily goal to suit your fitness needs and track your progress over time. The Nike+ FuelBand offers a flexible way to monitor and adjust your activity level, helping you stay motivated and achieve your fitness objectives.

How to change your profile on the Nike+ website

The Nike+ FuelBand is an activity tracker worn on the wrist that is compatible with iPhone, iPad, or Android devices. The information from the wristband is integrated into the Nike+ online community and phone application, allowing wearers to set their own fitness goals, monitor their progression, and compare themselves to others in the community.

To change your profile on the Nike+ website, follow these steps:

• Go to the Nike+ website and log in to your account.
• Navigate to your profile page. This can usually be found by clicking on your name or profile picture in the top-right corner of the website.
• Once you are on your profile page, look for an "Edit Profile" or "Settings" button. This will allow you to change your profile information, such as your name, email address, password, and other personal information.
• Make the desired changes to your profile. This may include updating your name, email address, or other personal information. You may also be able to change your profile picture or cover photo.
• Save your changes. Once you have finished making changes to your profile, be sure to save them. This will usually involve clicking a "Save" or "Update Profile" button.

It is important to note that as of April 30, 2018, Nike no longer supports the Nike+ Connect software that was previously used to transfer data to a user's NikePlus Profile. Despite this, you can still log in to the Nike+ website and make changes to your profile as needed.

How to update your Nike FuelBand

The Nike+ FuelBand was an activity tracker worn on the wrist and compatible with iPhone, iPad, or Android devices. It allowed its wearers to track their physical activity, steps taken daily, and amount of energy burned. The FuelBand is no longer supported by Nike, but if you have one, here's how you can update it.

Firstly, you'll need to set up your Nike+ FuelBand before you use it. To get started, open an internet browser on your computer and go to www.nikeplus.com/setup. You'll need to download and install the Nike+ Connect software, which allows you to sync your data to Nike+, customise your settings, and set your daily NikeFuel goal. Follow the on-screen instructions to install the software.

Next, take your Nike+ FuelBand out of the box and plug it into a USB port on your computer. You can also use the USB cable that came in the box.

Now, you'll need to create a new account. You can click 'register' or register using your Facebook or Twitter account. If you already have a Nike+ account, you can log in with your email address and password, or use your Facebook or Twitter account.

Once you've set up your account, you can adjust your FuelBand's fit. The FuelBand comes with two extender links—an 8mm link that’s already inserted in the band and an extra 16mm link. You can add or remove the links to make the fit looser or tighter.

To update the FuelBand, simply plug it into the USB port on your computer. Nike+ Connect will check for new firmware (updates for your FuelBand). When new updates are available, a message in Nike+ Connect will prompt you to accept the update.

That's it! Your FuelBand should now be updated with the latest firmware.

Frequently asked questions