Kia Sorento Fuel Filter: Diy Replacement Guide

Replacing the fuel filter on your Kia Sorento is a quick and easy task that can be done at home with basic tools. The fuel filter needs to be replaced periodically to avoid engine damage from particles in the fuel tank. The process involves opening the hood, locating and removing the fuel pump relay, relieving fuel system pressure by cranking the engine, locating and removing the fuel filter, installing a new fuel filter, reconnecting the fuel lines, and finally, restarting the car. It is important to wear safety glasses during this process to protect your eyes.

Locating the fuel filter

To locate the fuel filter of your Kia Sorento, open the hood and prop it open. Then, open the cover of the under-hood fuse box and locate the fuel pump relay by reading the diagram under the fuse box cover. Next, remove the fuel pump relay by pulling it up with your fingers. With the relay removed, crank the engine for approximately 5 seconds and repeat this step two more times. This will relieve the fuel system pressure to ensure safe removal of the fuel filter.

Now, you can locate the fuel filter on the passenger side of the engine compartment. It should be black and cylindrical with two fuel hoses attached to it. Unscrew the hose clamps with a screwdriver and pull the hoses off to access the fuel filter.

Removing the fuel pump relay

To remove the fuel pump relay on a Kia Sorento, follow these steps:

First, open the hood of your Kia Sorento and prop it open. Locate the under-hood fuse box and open its cover. You will find the fuel pump relay inside the fuse box. To identify it, read the diagram that is usually present under the fuse box cover.

Once you have located the fuel pump relay, use your fingers to pull it up and remove it. After removing the fuel pump relay, crank the engine for approximately 5 seconds and repeat this step three times. The engine will not start as the fuel pump relay has been removed, but cranking it will help relieve the fuel system pressure. This is an important safety measure as it ensures that you can remove the fuel filter without any fuel spraying dangerously.

Now, you can safely proceed with removing the fuel filter. It is located on the passenger side of the engine compartment and should be black and cylindrical in shape, with two fuel hoses attached to it. Use a screwdriver to unscrew both hose clamps and pull the hoses off. Then, unscrew the bracket holding the fuel filter and remove it.

At this point, you can install a new fuel filter. Simply screw the new fuel filter onto the bracket and tighten the bracket with a screwdriver. Connect the two fuel lines to the new fuel filter and tighten the hose clamps with a screwdriver. Finally, reinstall the fuel pump relay and start the car. It may take a few cranks to get the fuel circulated through the system for the car to start.

Relieving fuel system pressure

To relieve the fuel system pressure of your Kia Sorento, follow these steps:

Step 1: Open the Hood

Prop open the hood of your Kia Sorento. This will allow you to access the necessary components for relieving the fuel system pressure.

Step 2: Locate the Under-Hood Fuse Box

The fuse box is usually located on the passenger side of the engine compartment. Open the cover to access the fuses and relays.

Step 3: Identify the Fuel Pump Relay

Read the diagram under the fuse box cover to locate the fuel pump relay. It should be labelled clearly. The fuel pump relay controls the power to the fuel pump, and by removing it, you can disable the fuel pump temporarily.

Step 4: Remove the Fuel Pump Relay

Using your fingers, gently pull out the fuel pump relay from the fuse box. The fuel pump will now be deactivated, preventing the flow of fuel and building pressure in the system.

Step 5: Crank the Engine

With the fuel pump relay removed, turn the ignition key to the "Start" position and crank the engine for approximately 5 seconds. Repeat this process three times. The engine will not start, but cranking it will help relieve any remaining pressure in the fuel lines.

At this point, you have successfully relieved the fuel system pressure and can proceed with safely replacing the fuel filter without the risk of fuel spraying. It is important to exercise caution when working with fuel systems to avoid any potential hazards.

Removing the fuel filter

To remove the fuel filter from your Kia Sorento, you will need to first relieve the fuel system pressure so that you can safely remove the fuel filter without fuel spraying dangerously. Open the hood and prop it open. Then, open the cover of the under-hood fuse box and locate the fuel pump relay by reading the diagram under the fuse box cover. Remove the fuel pump relay by pulling it up with your fingers. Crank the engine for approximately 5 seconds and repeat this step two more times. The engine will not start as the fuel pump relay has been removed.

Next, locate the fuel filter on the passenger side of the engine compartment. It should be black and cylindrical with two fuel hoses attached to it. Unscrew both hose clamps with a screwdriver and pull the hoses off. Once the hoses have been removed, unscrew the bracket holding the fuel filter with a screwdriver and remove the old fuel filter.

When removing the fuel filter, take the necessary safety precautions. Wear safety glasses to protect your eyes from injury.

Installing the new fuel filter

Now that you have relieved the fuel system of pressure, it's time to install the new fuel filter.

First, locate the fuel filter on the passenger side of the engine compartment. You will recognise it by its black, cylindrical shape and two fuel hoses attached to it. Using a screwdriver, loosen and then unscrew the hose clamps and pull the hoses off. Next, unscrew the bracket holding the fuel filter in place and remove the old fuel filter.

Take your new fuel filter and attach it to the bracket. Tighten the bracket with a screwdriver. Now, connect the two fuel lines to the new fuel filter and tighten the hose clamps with your screwdriver.

You can now reinstall the fuel pump relay. Start the Kia Sorento and check for any leaks. It may take a few cranks to get the fuel circulated through the system for the car to start.

Frequently asked questions