Trimmer Maintenance: Replacing Fuel Lines In Bolens 110

Changing the fuel lines on a Bolens 110 trimmer can be a straightforward task. The fuel lines are part of the fuel tank assembly, which also includes the fuel cap, fuel filter, and screws needed for assembly. Before beginning this repair, it is important to drain the gas from the tank to avoid any safety hazards. The fuel lines should be routed from the opening of the tank to the other side, with the weighted line reaching almost to the opposite wall of the tank. The other line, which is a vent line, should be left protruding about an inch inside the tank. It is important to ensure that the lines are connected to the correct nipples at the carburetor, and pumping the purge bulb will help verify that the lines are installed correctly. If the fuel lines are leaking or clogged, it is recommended to replace them as soon as possible to avoid engine problems.

How to replace the fuel lines on a Bolens 110 trimmer

To replace the fuel lines on a Bolens 110 trimmer, you will need to purchase a fuel tank assembly, as the fuel lines are only sold as part of this assembly. The fuel tank assembly includes the fuel lines, fuel cap, fuel filter, and screws needed for assembly.

• Drain the gas from the fuel tank.
• Remove the old fuel tank assembly: This will involve unscrewing the screws holding the assembly in place and carefully detaching the fuel lines from the carburetor.
• Install the new fuel tank assembly:

• Insert the new fuel lines through the gas cap opening and thread them through the hole in the bottom of the fuel tank.
• Pull the lines through and place the retainer ring on the lines, pressing it firmly against the external side of the fuel tank wall.
• Attach the fuel lines to the correct ports on the carburetor. Ensure that the lines are connected to the correct nipples, as one line will be for fuel outflow and the other will be a return line/vent.

• Prime the carburetor by pumping the purge bulb several times to ensure that fuel is flowing through the lines.
• Check for any leaks and ensure that the fuel lines are securely attached.

By following these steps, you will be able to successfully replace the fuel lines on your Bolens 110 trimmer, ensuring that your equipment continues to run smoothly and safely.

Where to buy replacement fuel lines

If you are looking to replace the fuel lines of your Bolens 110 trimmer, you can purchase a new fuel tank assembly, which includes the fuel lines, from various online retailers. Here are some options:

Apex Tool Supply

Apex Tool Supply offers a Fuel Tank Assembly Replacement (Part Number: 753-06183) that is compatible with MTD 753-06183, Craftsman, Cub Cadet, Troy-Bilt, Yard Man, and Bolens line trimmers. This product is available on Amazon.com.

EReplacementParts.com

EReplacementParts.com also offers the Fuel Tank Assembly (Part Number: 753-06183) which includes the fuel lines. This website specializes in providing genuine Bolens replacement parts.

Amazon.com

Amazon offers a variety of Bolens BL110 parts, including the Fuel Tank Assembly with the part number 753-06183. Additionally, Amazon also offers the Hipa WT973 Carburetor Kit, which includes a fuel line, fuel filter, and spark plug. This kit is compatible with the Bolens BL110, BL160, and BL425 models.

How to install the fuel tank assembly

To install the fuel tank assembly on your Bolens 110 trimmer, you will need to first drain the gas from the tank of your trimmer. Next, remove the old fuel tank assembly by detaching the fuel lines from the carburettor. You can do this by cutting the lines at an angle and pulling them through.

Now, take your new fuel tank assembly and trim the new fuel lines at a 45-degree angle. Feed these lines into the tank and pull them through, trimming the ends square. Ensure that the line with the weight goes all the way to the bottom of the tank, almost touching the opposite wall. Leave about an inch of the other line (the vent line) protruding inside the tank.

Finally, connect the fuel lines to the correct nipples on the carburettor. Pump the purge bulb to ensure the lines are installed correctly. You should see fuel surging through the lines. If not, switch the lines at the carburettor end and try again.

How to identify if the fuel lines need replacing

Knowing when to replace the fuel lines on your Bolens 110 trimmer is essential for keeping your equipment in top shape. Here are some detailed instructions on how to identify if the fuel lines need replacing:

Signs of Wear or Damage

The fuel lines on your trimmer play a crucial role in delivering fuel from the tank to the engine. Over time, these lines can become worn out, cracked, or clogged, leading to decreased performance or engine issues. Keep an eye out for any visible signs of deterioration, such as cracks, brittleness, or leaks. If you notice any of these, it's a clear indication that the fuel lines need to be replaced.

Engine Performance Issues

If your trimmer is not starting or is running erratically, it could be a sign that the fuel lines need attention. Fuel lines can become clogged or damaged, hindering the flow of fuel to the engine. This can result in poor engine performance, such as difficulty starting, stalling, or uneven running. If you suspect fuel line issues, inspect the lines carefully and replace them if necessary.

Fuel Line Age

Even if your fuel lines appear to be in good condition, it's important to consider their age. Fuel lines should be replaced periodically, typically once every two years or as recommended by the manufacturer. Aged fuel lines are more prone to cracking, leaking, and other forms of deterioration. Regular replacement ensures optimal performance and helps prevent unexpected failures.

Fuel Contamination

The condition of your fuel can also impact the lifespan of your fuel lines. If you've been using old or contaminated fuel, it may have caused damage to the fuel lines. Over time, dirt, debris, or water can accumulate in the fuel, leading to clogged or damaged fuel lines. If you've had issues with fuel contamination, it's a good idea to inspect and replace the fuel lines to prevent further problems.

Difficulty in Fuel Flow

When the fuel lines become clogged, partially blocked, or kinked, it can restrict the flow of fuel to the engine. This may result in the engine starving for fuel or receiving an insufficient amount. If you notice that your trimmer is not getting enough fuel or experiences frequent surges, it could be a sign that the fuel lines need to be replaced.

In summary, keeping a close eye on the condition of your fuel lines and being aware of any performance issues will help you identify when they need to be replaced. By replacing the fuel lines as needed, you can ensure that your Bolens 110 trimmer runs smoothly and efficiently, making your landscaping tasks a breeze.

How to troubleshoot fuel line issues

To troubleshoot fuel line issues on your Bolens 110 trimmer, you can follow these steps:

• Identify the problem: Check if the fuel lines are rotted, cracked, or leaking. Also, look for any signs of clogging in the fuel line or carburetor.
• Obtain replacement parts: You can purchase a fuel line and filter kit, which should include the necessary fuel lines and a new fuel filter. You may also need a new carburetor if the issue is related to fuel and air mixing.
• Drain the fuel tank: Before starting any repairs, it is important to drain the gas from the fuel tank to avoid any accidental spills during the repair process.
• Disconnect the old fuel lines: Carefully remove the old fuel lines from the fuel tank and carburetor. Take note of how the lines are routed and where they connect.
• Install the new fuel lines: Cut the new fuel lines at a 45-degree angle and feed them into the fuel tank. Ensure that the line with the weight goes all the way to the bottom of the tank, and the other line (vent line) protrudes about an inch inside the tank.
• Secure the fuel lines: Use the provided retainer ring to secure the fuel lines in place, both inside and outside the fuel tank.
• Connect the fuel lines to the carburetor: Attach the fuel lines to the correct ports on the carburetor. Refer to your trimmer's manual or seek assistance if you are unsure about the connections.
• Refill the fuel tank and test: Once the new fuel lines are installed, refill the fuel tank and start the trimmer to ensure that it is now operating correctly.

It is important to follow safety precautions when working with fuel and power equipment. Always wear appropriate protective gear and refer to the manufacturer's instructions or seek expert advice if needed.

Frequently asked questions