Changing Fuel Filters: A Step-By-Step Guide For Sorento Owners

Changing the fuel filter in a Kia Sorento is a quick and easy task that can be done at home with basic tools. The fuel filter is located inside the fuel tank, and can be accessed by removing the rear seat. It is important to change the fuel filter periodically, as dirt can clog fuel injectors and cause major drivability issues. The process involves relieving the fuel system pressure, removing the fuel pump, disconnecting the fuel sender connector, and then installing a new fuel filter and reassembling the components.

Locating the fuel filter

To locate the fuel filter in a Kia Sorento, first open the hood and secure it in an upright position. Then, open the cover of the under-hood fuse box and locate the fuel pump relay by reading the diagram under the fuse box cover. Next, remove the fuel pump relay by pulling it up with your fingers. With the relay removed, crank the engine for about 5 seconds and repeat this step two more times. The engine will not start as there is no fuel pump relay; this step is to relieve the pressure in the fuel system.

Now, you can locate the fuel filter on the passenger side of the engine compartment. It is black and cylindrical in shape and has two fuel hoses attached to it.

Removing the fuel pump relay

To remove the fuel pump relay on a Kia Sorento, you will need to first open the hood and prop it open. Next, open the cover to the under-hood fuse box and locate the fuel pump relay. You can find the fuel pump relay by reading the diagram under the fuse box cover. Once you have located the fuel pump relay, simply pull it up with your fingers to remove it.

It is important to note that removing the fuel pump relay will disable the fuel pump, preventing the engine from starting. This is done to relieve fuel system pressure so that you can safely remove the fuel filter without fuel spraying dangerously. Therefore, it is crucial to crank the engine for approximately 5 seconds and repeat this process three times to ensure that any remaining pressure is released before proceeding with any further maintenance or repairs.

Additionally, always wear safety glasses to protect your eyes from potential injury when working on your vehicle.

Removing the fuel filter

To remove the fuel filter from a Kia Sorento, you will need to first open the hood and prop it open. Next, open the cover to the under-hood fuse box and locate the fuel pump relay by reading the diagram under the fuse box cover. Remove the fuel pump relay by pulling it up with your fingers.

With the fuel pump relay removed, crank the engine for approximately 5 seconds and repeat this three times. This will relieve the fuel system pressure, allowing you to safely remove the fuel filter without fuel spraying.

The fuel filter is located on the passenger side of the engine compartment. It is black and cylindrical in shape, with two fuel hoses attached. Use a screwdriver to unscrew both hose clamps and pull the hoses off. Then, unscrew the bracket holding the fuel filter and remove it.

If the fuel lines are difficult to remove from the old fuel filter, you can use pliers to grab onto the line where it connects to the filter and twist it side to side until it breaks free. Remember to wear safety glasses to protect your eyes.

Installing a new fuel filter

Step 1: Prepare the car

Open the hood and prop it open. Open the under-hood fuse box and locate the fuel pump relay by reading the diagram under the fuse box cover. Remove the fuel pump relay by pulling it up with your fingers.

Step 2: Relieve fuel system pressure

Crank the engine for approximately 5 seconds and repeat this process three times. The engine will not start as the fuel pump relay has been removed. This step is important to relieve the fuel system pressure, ensuring that you can safely remove the fuel filter without fuel spraying.

Step 3: Locate and remove the old fuel filter

The fuel filter is located on the passenger side of the engine compartment. It is black and cylindrical, with two fuel hoses attached. Loosen and remove both hose clamps with a screwdriver, then pull the hoses off. Unscrew the bracket holding the fuel filter and remove it.

Step 4: Install the new fuel filter

Take the new fuel filter and attach it to the bracket. Tighten the bracket with a screwdriver. Connect the two fuel lines to the new fuel filter and tighten the hose clamps with a screwdriver.

Step 5: Reinstall the fuel pump relay and test

Reinstall the fuel pump relay. Start the Kia Sorento and check for any leaks. It may take a few cranks to get the fuel circulated through the system for the car to start.

Additional tips:

• The fuel lines may be difficult to remove from the old fuel filter. If this is the case, use pliers to grip the fuel line where it connects to the fuel filter and twist the line side to side until it breaks free.
• Always wear safety glasses to protect your eyes from injury.

Reinstalling the fuel pump relay

To reinstall the fuel pump relay in your Kia Sorento, follow these steps:

• Open the hood of your Kia Sorento and prop it open.
• Locate the under-hood fuse box and open its cover. You will find the fuel pump relay by reading the diagram under the fuse box cover.
• Reinstall the fuel pump relay by pushing it back into place with your fingers. Ensure it is secure.
• Start the car. It may take a few cranks to get the fuel circulated through the system for the car to start.

It is important to note that before removing the fuel pump relay, you would have cranked the engine for approximately 5 seconds, repeated three times, to relieve fuel system pressure. This step is crucial for safety reasons, as it ensures that fuel does not spray dangerously when you are working on the fuel system.

Frequently asked questions