Craftsman Weedwacker: Replacing Fuel Filter, Step-By-Step Guide

If you're looking to replace the fuel filter on your Craftsman Weedwacker, you've come to the right place. This is a step-by-step guide on how to do it safely and efficiently. First, you'll need to disconnect the spark plug wire and empty the fuel tank into an approved storage container. Then, you can locate and remove the fuel filter from inside the gas tank using needle-nosed pliers or a wire hanger. Next, disconnect and remove the fuel lines from the carburetor, before feeding the new fuel lines into the tank, cutting them at an angle to make this easier. Attach the new fuel filter to the end of the smaller fuel line and drop it into the tank. Reconnect the fuel lines to the carburetor, reattach the spark plug wire, and fill the tank with fuel. Now you're ready to test your Weedwacker and ensure it's working properly.

Disconnect the spark plug wire

To disconnect the spark plug wire on a Craftsman weedwacker, first park the tractor on a level surface in a well-ventilated area. Set the parking brake and turn off the ignition. It's important to let the engine cool down before proceeding. Wear work gloves to protect your hands, then lift the tractor hood. Now you can pull the spark plug wire straight off the spark plug.

Remove the fuel filter

To remove the fuel filter from your Craftsman Weedwacker, first disconnect the spark plug wire by pulling it straight off the spark plug. Then, in a well-ventilated area, remove the fuel cap and empty the fuel tank into an approved storage container.

Now you can remove the fuel filter. It's a white cylinder attached to the end of the small fuel line inside the gas tank. Use a pair of needle-nosed pliers or a straightened wire clothing hanger with a hook formed on the end to fish the filter out of the tank. Once you've done that, pull the fuel filter off the end of the fuel line.

Disconnect the lines from the carburetor

Disconnecting the lines from the carburetor is a crucial step in changing the fuel filter on a Craftsman Weedwacker. Here is a detailed, step-by-step guide to help you through the process:

Firstly, before you begin any work on your Weedwacker, it is essential to ensure your safety. For this task, you should wear protective gear, including gloves and safety goggles. You should also move your Weedwacker to a well-ventilated area to avoid inhaling excessive fumes.

Now, let's begin the process of disconnecting the lines from the carburetor. Start by locating the fuel lines. These are the lines that carry fuel from the fuel tank to the carburetor. They are usually colour-coded or labelled clearly. Once you have identified the fuel lines, the next step is to make a diagram or take a clear picture of how these lines are configured and connected to the carburetor. This step is crucial as it will serve as a reference when reconnecting the new fuel lines.

Using a pair of needle-nose pliers, carefully grip the fuel lines and gently pull them away from the carburetor. Be cautious not to use excessive force, as it may damage the lines or the carburetor. If the lines are tightly secured, you can try wiggling them gently back and forth to loosen them before pulling them out. Ensure that you do not bend or split the lines during this process, as it can affect the fuel flow.

Once the fuel lines are disconnected from the carburetor, carefully set them aside, keeping track of their orientation. It is important to ensure that you do not misplace or confuse the lines, as it will be challenging to reconnect them properly.

At this point, it is a good idea to inspect the disconnected fuel lines for any signs of damage, such as cracks, splits, or blockages. If you notice any issues, make sure to replace the fuel lines with manufacturer-approved parts before proceeding further.

By following these steps, you will successfully disconnect the fuel lines from the carburetor of your Craftsman Weedwacker, preparing you for the next steps in changing the fuel filter. Remember to stay cautious and refer to your Weedwacker's user manual if you need further clarification on any of the steps.

Pull the fuel lines out of the tank

To pull the fuel lines out of the tank of your Craftsman Weedwacker, you will need needle-nose pliers or a wire hanger. You should also place an approved fuel container on standby to catch any fuel that spills out of the tank.

First, disconnect the spark plug wire by pulling it straight off the spark plug. Then, in a well-ventilated area, remove the fuel cap and empty the fuel tank into your approved storage container.

Now you can pull out the fuel lines. Grip the lines with the needle-nose pliers and pull them out of the tank. If you can't pull the lines out, cut them flush with the tank, then use a small screwdriver to push the remaining line pieces into the tank. Tip the trimmer and shake it to get any small pieces out of the tank.

Feed the new fuel lines into the tank

To feed the new fuel lines into the tank, first cut the ends of the new fuel lines at an angle. This will make it easier to thread them into the tank. Then, force the cut ends of the lines into the proper holes of the tank, using needle-nose pliers if necessary. You may need to apply a small amount of oil to the outside of the line to make this process easier. Push the larger vent line about an inch into the tank. Finally, push the smaller fuel supply line into the tank far enough so that the fuel filter will lay on the bottom of the tank.

Frequently asked questions