Replacing The Fuel Filter On A 2006 Honda Rincon 680: Step-By-Step Guide

If you're looking to change the fuel filter on your 2006 Honda Rincon 680, you'll first need to locate the fuel pump. Follow the hose from the fuel tank down in front of the motor, and you'll find an aluminium tank that houses both the fuel pump and the filter. It's important to note that they come as one piece. While it is possible to get a filter separately, replacing the entire assembly is often the easier option. When removing the old filter, be careful not to force anything, as the components inside are made of plastic.

The fuel pump and filter are in one unit

To change the fuel filter on a 2006 Honda Rincon 680, you will need to access the fuel pump and filter assembly, which are located together as one unit. Here is a step-by-step guide to help you through the process:

Step 1: Locate the Fuel Pump and Filter Assembly

Follow the hose from the fuel tank down in front of the motor. You will find an aluminium tank, which houses both the fuel pump and the filter.

Step 2: Prepare for the Replacement

Before starting, it is important to take your time and not force any components loose during the process of removing the pump assembly. Make sure you have the necessary tools and a replacement fuel filter ready.

Step 3: Remove the Old Fuel Filter

Carefully remove the fuel pump assembly, following any specific instructions provided by Honda for this model. Pay close attention to the quick-connect fitting, as it can be challenging to release. You may need to pull the fuel joint rubber out and snip it to make releasing the retainer easier.

Step 4: Install the New Fuel Filter

With the old fuel filter removed, you can now install the new fuel filter. Ensure you follow the instructions for this step carefully, as the assembly is made of plastic and can be delicate.

Step 5: Reassemble and Test

Once the new fuel filter is in place, carefully reassemble the fuel pump assembly and secure it in place. Check that all connections are secure before starting the engine.

It is recommended to refer to a Honda Rincon service manual or seek advice from a qualified mechanic if you are unsure about any steps or procedures.

Some Honda Rincon owners have also suggested adding an inline filter above the pump as a precautionary measure. This can provide additional protection for the fuel system and engine.

You can get a filter separately if you don't need the pump

If you don't need the pump assembly, you can get a filter separately. The filter locking mechanism is not the same as the OEM, and the filter surface area is bigger, which makes installation a little more difficult. However, it is half the cost.

You can find fuel filters for the Honda Rincon 680 on Amazon, where they are highly rated and described as "perfect" and "exactly what was needed." The AUTOKAY 16706-HN8-305 Fuel Filter Kit is compatible with the Honda Rincon 680 and is available for $19.94.

The filter is cheap

The fuel filter for your 2006 Honda Rincon 680 is an inexpensive part, with prices starting at $19.94. This small price tag makes it an affordable fix for your ATV. You can find the part on Amazon, where it has received positive reviews from buyers.

The filter is easy to install, and with this simple and cheap fix, you can get your Honda Rincon 680 running smoothly again. The filter is a great investment to ensure the long-term health of your ATV and to avoid any fuel-related issues.

You can also find the fuel filter on eBay, where it is sold by various sellers, often as part of a package with other parts. This gives you the option to stock up on filters and other necessary components for your Honda Rincon 680.

Overall, the fuel filter is an essential and cost-effective component to maintain the performance of your ATV.

Be careful, as everything inside the pump and filter assembly is plastic

When changing the fuel filter on a 2006 Honda Rincon 680, it's important to be cautious and gentle as all the components inside the pump and filter assembly are made of plastic.

First, locate the fuel pump and filter assembly. On the 2007 model, this is an aluminium tank that you can find by following the hose from the fuel tank down in front of the motor. It's important to note that the 2006 model may have a slightly different setup, but the process should be similar.

Once you've located the assembly, carefully follow the instructions to remove it. Take your time and avoid using force when detaching any parts, as this can damage the plastic components.

After successfully removing the assembly, you'll have access to the fuel filter. Again, be cautious when handling the filter and any surrounding parts to avoid any accidental breakage.

When installing the new fuel filter or reassembling the old one, carefully follow the instructions provided by the manufacturer. Ensure that all connections are secure before starting the engine.

By being cautious and meticulous throughout the process, you can successfully change the fuel filter on your 2006 Honda Rincon 680 while avoiding any damage to the plastic components within the pump and filter assembly.

The hardest part is getting the quick-connect fitting off

When changing the fuel filter on a 2006 Honda Rincon 680, the hardest part of the process is getting the quick-connect fitting off. This is because the quick-connect fitting is designed to be difficult to remove, and it can be challenging to access and manipulate the necessary components.

To remove the quick-connect fitting, you will need to locate the fuel joint rubber and pull it out far enough to snip it and remove it. This will make it easier to release the retainer than fighting it and the rubber. You may need to purchase a fuel filter kit that includes the necessary tools and components to complete this task.

It is important to take your time and not force anything to come loose when working on the fuel pump and filter assembly, as the components inside are made of plastic and can be easily damaged. Additionally, it is recommended to follow the instructions for this task carefully to avoid any issues.

Overall, while getting the quick-connect fitting off can be challenging, with patience and the right tools, it can be successfully completed as part of the fuel filter replacement process on a 2006 Honda Rincon 680.

Frequently asked questions