Ford Expedition Fuel Filter: Changing The 2005 Model

If you're looking to change the fuel filter on a 2005 Ford Expedition, you've come to the right place. This is a job you can do yourself, but it's important to take the necessary precautions and follow the correct steps to avoid any mishaps. The fuel filter is located in front of and at the top of the gas tank on the driver's side. Before you begin, park your car in a well-ventilated area, engage the parking brake, and slowly remove the gas cap to depressurize the fuel system. You'll then need to slide under the car and locate the fuel filter, which is a cylinder-shaped component with fuel lines coming out of each end. From here, you can start to disconnect the fuel lines and replace the filter, making sure to note the direction of the arrow on the filter so that you can position the new one correctly.

Locating the fuel filter

To locate the fuel filter on a 2005 Ford Expedition, look on the driver's side of the vehicle. The fuel filter is located in front of and at the top of the gas tank, which is on the left-hand side of the vehicle.

The fuel filter is positioned under the body of the vehicle, attached to the left frame rail. You will need to slide under the truck to see it. It is about the size of a 20-ounce water bottle.

To access the fuel filter, you will first need to remove the negative battery cable from the battery. There are two metric nuts holding a metal guard that hides the filter. Remove these two nuts, and the guard will come off, revealing the filter.

Before disconnecting the fuel lines, it is important to release the pressure from the system. This can be done by removing the fuse for the fuel pump with the engine running, causing it to stall. Turn the ignition off, put the fuse back in place, and then you can proceed to disconnect the fuel lines and replace the filter.

Disconnecting the fuel lines

Before beginning, ensure you have the necessary tools, including a fuel line quick-disconnect tool and a flat-head screwdriver. These tools can be purchased at most auto-parts stores. It is also important to work in a well-ventilated area and to avoid any open flames or smoking during the process, as you will be working with flammable fuel.

To begin, park your Ford Expedition on a level surface and engage the parking brake to prevent any accidental movement. Next, slowly remove the gas cap from the filler tube on the gas tank. This step is important as it helps to depressurize the fuel system, reducing the risk of fuel spraying when the fuel lines are disconnected.

Locate the fuel filter, which is positioned in front of and at the top of the gas tank on the driver's side. Place a drip pan underneath the fuel filter to catch any fuel that may spill during the process.

Now, you can start disconnecting the fuel lines. Insert the end of the quick-disconnect tool into one of the fuel lines connected to the fuel filter. Press the tool inward while simultaneously pulling outward on the fuel line. This will release the line from the fuel filter port. Repeat this process for the other fuel line.

Once both fuel lines are disconnected, use the flat-head screwdriver to loosen the clamp holding the fuel filter in place. Pay attention to the direction of the arrow on the side of the fuel filter, as this indicates the direction of fuel flow and is important when installing the new fuel filter. Carefully remove the old fuel filter from the bracket and place it into the drip pan.

At this point, you have successfully disconnected the fuel lines from the old fuel filter. The next step would be to install the new fuel filter, ensuring the arrow is pointing in the correct direction, and then reconnect the fuel lines to the new filter.

Remember to always exercise caution when working with fuel and refer to safety guidelines provided by the manufacturer or automotive experts.

Removing the old fuel filter

To remove the old fuel filter from your 2005 Ford Expedition, begin by parking your car in a well-ventilated area on a level surface and engaging the parking brake. Next, remove the gas cap from the filler tube on the gas tank to depressurize the fuel system and prevent fuel from spraying when the fuel lines are removed.

Now, slide under the driver's side of the car and locate the fuel filter. It is a cylinder-shaped component with a quick-connect fuel line coming out of each end, mounted to the frame rail directly in front of the gas tank. Place a drip pan under the fuel filter to catch any spills.

Insert a quick-disconnect tool into the end of one of the fuel lines, pressing it inward and pulling the fuel line out at the same time. Repeat this process for the other fuel line. Then, loosen the clamp around the fuel filter with a flat-head screwdriver and remove the filter from the bracket, taking note of the direction of the arrow on the filter. The arrow indicates the direction of fuel flow and must point toward the fuel line travelling to the engine. Place the old fuel filter in the drip pan.

Be sure to dispose of the old fuel filter properly, following state and local laws regarding the discarding of used fuel and fuel filters. Never dispose of fuel onto the ground.

Installing the new fuel filter

To install the new fuel filter, position it into the clamp with the arrow pointing in the same direction as the old filter. Tighten the clamp over the new fuel filter with a screwdriver. Then, push both fuel lines straight back onto the new fuel filter ports until each line locks into place. Once the lines are pushed far enough onto the ports, the plastic clips will lock inside the fuel lines. To ensure that each fuel line is secured to the fuel filter ports, slowly pull outward on the fuel lines.

Slide the drip pan out from under the Ford Expedition and screw the gas cap back onto the filler tube until it clicks. Turn the ignition to the accessory position for about five seconds, then turn it back to the off position. Repeat this process two more times before cranking the engine.

Crank the engine and inspect the new fuel filter for signs of gas leaking around the fuel lines. Let the engine run for about 30 seconds, then turn it off. The arrow imprinted on the side of the fuel filter represents the direction of fuel flow through the filter. It must point toward the fuel line travelling to the engine.

Checking for leaks

To check for leaks, turn the ignition to the accessory position for about five seconds, then turn it back off. Repeat this process two more times before cranking the engine. Once the engine is running, inspect the new fuel filter for signs of gas leakage around the fuel lines. Let the engine run for about 30 seconds, then turn it off.

The arrow imprinted on the side of the fuel filter indicates the direction of fuel flow through the filter. The arrow must point towards the fuel line that is travelling to the engine.

Frequently asked questions