Regan Brown
There are several methods to blow up fuel tanks in SS13, a community-driven multiplayer simulation game. One method involves igniting the welding fuel and causing an explosion using a second signaller or a spark. Another approach is to create IEDs or welderbombs, although these may not cause significant damage. Players can also experiment with different gas mixes in a single tank to create a bomb, but this requires careful activation to avoid premature detonation. Additionally, some players have suggested releasing the Tesla or Singulo, depressurizing the SM to space, or causing an atmospheric fire by cracking open the CO2 fuel tank.
| Characteristics | Values |
|---|---|
| Fastest way to blow up a fuel tank | Remove tiles around the fuel tank to depressurise it to space, then turn on the emitters |
| Another fast way | Crack open the CO2 fuel tank |
| Another fast way | Spray the atmos gel from the backpack into the shard |
| To ignite the welding fuel | Activate the second signaller to cause a spark |
| Alternative way to ignite | Shoot a laser at the tank |
| Alternative way to ignite | Create IEDs |
| Alternative way to ignite | Throw a firebomb |
| Alternative way to ignite | Use a plasma leak |
Explore related products
$6.99
What You'll Learn
Using a welderbomb
When using a welderbomb, it is important to have at least 3-4 welding fuel tanks close together to ensure a significant breach. You can armour up and have a buddy ready to extinguish you, or you can throw an IED at the fuel tanks. Alternatively, you can shoot a laser at the fuel tanks or create a tank bomb by heating up oxygen or plasma inside a canister to increase the pressure until it explodes.
If you want to detonate the fuel tanks remotely, you can use a signaler to set off the explosion from a distance. However, there is a risk of the igniter/signaller surviving the explosion, so be sure to not leave any fingerprints on the assembly. Another method is to use a timed C4 or a timed modular grenade to trigger the explosion without putting yourself at risk.
It is important to note that welderbombs can cause significant damage and have unpredictable consequences. It is recommended to exercise caution and consider the potential risks before attempting to blow up fuel tanks using welderbombs or any other method.
Fuel Tank Endurance: How Far Can You Go?
You may want to see also
Explore related products
Sabotaging the SM as an antag
Step 1: Access the SM and Air Alarms
Firstly, you'll need to gain access to the SM and air alarms. This is crucial as it gives you control over the gas and pressure levels in the SM.
Step 2: Create a Vacuum
To cause a rapid explosion, you can try depressurising the SM to space. Remove the tiles around it and turn on the emitters. This will create a vacuum, causing the SM to blow up within seconds. However, this method might be slow to execute and may give others a chance to stop you.
Step 3: Use Gases
If you're looking for a faster method, consider using gases. CO2 is an excellent choice for a quick explosion. You can flood the SM with CO2 and turn on the emitters. Additionally, you can use the atmos gel from the backpack. Spray it into the shard to block the surrounding tiles, trapping the gas and pressure and leading to an explosion.
Step 4: Syndicate Bomb (High Risk)
For an even faster method, buy a syndicate bomb. Place it next to the SM and shoot at it with any gun. This will cause a massive explosion, but be warned, you might get vaporised in the process.
Step 5: Disrupt Engineering
To ensure your plan succeeds, consider disrupting the engineering crew. Killing them or cutting off their access to the SM will prevent them from stopping your sabotage.
Bonus Tip: Create Chaos Elsewhere
If your goal is to cause maximum destruction and chaos, you can try buying a singuloth magnet and placing it on the other side of the station. This will slice the map in two and give you more time to create bombs and take out remaining crew members.
Remember, the key to a successful sabotage is to act quickly, disrupt key areas, and always have a backup plan in case your initial attempt is thwarted.
Applying West System Epoxy Over Aluminum Fuel Tanks
You may want to see also
Explore related products
Creating an IED
Firstly, gather the necessary materials. This may include explosives, a container, a timer, a trigger mechanism, and any other components required for the specific design of the IED. It is important to note that acquiring and handling explosive materials can be highly dangerous and illegal in many jurisdictions, so ensure you are complying with all relevant laws and regulations.
Next, assemble the components according to the design of your IED. This may involve carefully combining the explosives with a detonator, fuse, or other triggering device. Always follow best practices for handling explosives, including wearing protective gear and working in a safe, controlled environment.
When assembling the IED, consider the desired effect and the target. For example, if the goal is to create a large explosion, you may need a substantial amount of explosives and a container that can withstand the blast. Alternatively, if the objective is to start a fire, you may opt for a design that utilizes flammable liquids or materials.
Once the IED is assembled, it is crucial to test and store it safely. Ensure that the device is stable and that all components are functioning correctly. Store the IED in a secure location, away from any potential sources of ignition or tampering.
Finally, when deploying the IED, exercise extreme caution and follow any established protocols or procedures for handling and deploying explosives. Always prioritize your safety and the safety of others.
It is important to note that creating and using IEDs can be highly dangerous and illegal in many contexts. This information is provided for educational purposes only and should not be interpreted as encouragement or instruction to engage in any illegal or unsafe activities.
Expanding Isuzu Box's Range: Installing a Second Fuel Tank
You may want to see also
Explore related products
Activating a single tank bomb
To create a single-tank bomb, you will need to understand the basic mechanics of causing an explosion. The simplest way to do this is by causing a spark that ignites the welding fuel and blows up the tank. This can be done by activating a second signaller. However, this method may not always be effective, and you may need to run away after causing the spark to avoid getting caught.
Another way to cause an explosion is by using a laser to ignite the fuel tank. This method is more direct and can be done from a distance, reducing the risk of getting caught.
If you want to create a more powerful explosion, you can use a welder bomb. Welder bombs are created by having 3-4 welding fuel tanks next to each other and igniting them simultaneously. This method can cause significant damage but may not always be feasible, depending on the situation and the number of fuel tanks available.
Additionally, you can create a single-tank bomb using toxins. This method involves mixing 80000K plasma with oxygen in a single tank. However, this mixture may not always be stable, and you need to be careful about how you activate the bomb to avoid accidental detonation. The key is to spike the pressure in the bomb when you want it to explode, ensuring that you are not too close to the blast radius.
Finally, if you are looking for a more indirect method of causing an explosion, you can try compromising the atmosphere of the ship. This can be done by opening the roof to the atmo's oxygen tank and leaving a fire there, which will melt the walls and cripple the ship. Alternatively, you can make a hole in the hanger floor to cause an immediate atmospheric compromise.
Fixing Fuel Tank Leaks in Chevy Trailblazer and GMC Envoy
You may want to see also
Explore related products
Cracking open the CO2 fuel tank
Using an igniter or signaller:
This method involves activating a spark by using either an igniter or a second signaller. This spark will ignite the welding fuel, causing an explosion that blows up the welding tank. However, it's important to note that you may survive the explosion, so take precautions to not leave any fingerprints on the assembly.
Creating an IED:
Instead of using a welder bomb, you can create Improvised Explosive Devices (IEDs). These can be made using welding fuel, but they won't create a large explosion. IEDs will set objects and mobs on fire and have a randomised timer, so they might explode right after activation or a few seconds later.
Laser ignition:
Another method is to simply shoot a laser at the fuel tank. Lasers can ignite the fuel and cause an explosion.
CO2 flooding:
CO2 is an effective gas to use when trying to blow up the SM as an antag. You can try flooding the SM with CO2 and turning on all the emitters. Additionally, spraying the atmos gel from the backpack can help block ventilation and contain the gas and pressure, increasing the chances of an explosion.
Removing tiles and depressurising:
By removing tiles around the SM and turning on the emitters, you can cause the SM to depressurise to space. This method can lead to a pretty big explosion, but it might take some time.
Remember to be cautious and aware of the potential consequences when attempting any of these methods, as they can be dangerous and have unpredictable outcomes.
Sportster Tanks: How Much Fuel Can They Hold?
You may want to see also
Frequently asked questions
One way to blow up fuel tanks in SS13 is to use a welder bomb. However, this method may only work if there are 3-4 welding fuel tanks next to each other.
Other methods include igniting the welding fuel using a second signaller, creating an IED, or shooting a laser at the tank.
One way is to depressurize the SM to space by removing the tiles around it and turning on the emitters. Alternatively, you can buy a syndicate bomb and shoot at it with a gun, but you might get vaporized in the process.
