Mercedes Mullins
Permatex is a leading manufacturer of chemical products for automotive maintenance and repair. Its Fuel Tank and Radiator Repair Kit is designed to seal holes, seams, or cracks in metal tanks, radiators, or gas cans. The product is not recommended for use on plastic gas tanks. Some users have reported that the product does not work on plastic radiators, while others have found success with additional heat. It is important to read all directions before beginning any repair work.
| Characteristics | Values |
|---|---|
| Type of product | Fuel & Radiator Repair Kit |
| Product form | Two-component stick |
| Use | Seals holes, seams, or cracks |
| Surfaces | Metal tanks, radiators, or gas cans |
| Resistance | Chemical and moisture |
| Flammability | Non-flammable |
| Cure time | 2 hours |
| Temperature range | 50°F to 75°F |
| Cure time at lower temperatures | Longer than 2 hours |
| Preparation | Remove gas cap, ensure ventilation, drain tank if necessary, prepare damaged area |
| Application | Knead the two components together, apply to the surface, smooth with a brush |
| Safety warnings | Not for use on plastic fuel tanks, cancer warning |
| Customer reviews | Varied, some positive, some negative |
Explore related products
What You'll Learn
Permatex Fuel Tank and Radiator Repair Kit
The Permatex Fuel Tank and Radiator Repair Kit is a two-component stick that can seal holes, seams, or cracks in metal tanks, radiators, or gas cans. It is designed to be kneaded together and provides excellent chemical and moisture resistance and is non-flammable. The repair resin is designed to cure within two hours at temperatures between 50°F and 75°F (10°C to 25°C). Repairs made at lower temperatures will take longer to cure.
The Permatex kit includes easy-to-follow instructions with photographs, making it simple for anyone to use. It is important to read all directions before beginning the repair process. The first step is to remove the gas cap to vent the tank and ensure adequate ventilation. If the leak is large, the tank should be drained or the liquid level reduced to at least 2 inches below the damaged area. The damaged area should then be prepared by removing any oil, grease, tar, or dirt.
The Permatex Fuel Tank and Radiator Repair Kit is not recommended for use on plastic gas tanks. For plastic tanks, Permatex offers a separate Plastic Tank Repair Kit. This kit is designed to repair cracks up to 4 inches in length and holes up to 3/8 inch in diameter. The repair process involves mixing the resin, applying it to the damaged area, and then covering it with fiberglass. The resin will begin to harden within 8 to 10 minutes and will cure in 30 minutes.
While the Permatex Fuel Tank and Radiator Repair Kit has received some positive reviews for its effectiveness and ease of use, there are also reviews that indicate it may not work for all situations. Some users have reported that it did not work on plastic radiators or that the repairs did not last long-term. It is important to carefully follow the instructions and ensure that the kit is suitable for the specific type of repair before use.
Fueling Your PWC: Tank Tips and Tricks
You may want to see also
Explore related products
Permatex's two-component stick
Permatex's Fuel Tank and Radiator Repair Kit is a two-component stick that can seal holes, seams, or cracks on metal tanks, radiators, or gas cans. It is designed to cure within two hours at temperatures between 50°F and 75°F (10°C and 25°C). The repair process involves kneading the two components together and applying them to the damaged area. This product is not suitable for use on plastic gas tanks or plastic radiators.
The two-component stick provides excellent chemical and moisture resistance and is non-flammable, making it a reliable choice for sealing leaks in fuel tanks and radiators. It is essential to read and follow the directions provided with the kit before beginning any repair work. This includes ensuring adequate ventilation and preparing the damaged area by removing any oil, grease, tar, or dirt.
While Permatex's two-component stick is a popular choice for repairing metal fuel tanks and radiators, some users have reported mixed results when using it on plastic radiators. It is important to note that this product is not designed for use on plastic gas tanks, and attempting to do so may yield unsatisfactory results. For repairs to plastic components, alternative solutions may need to be considered.
Overall, Permatex's two-component stick is a trusted and effective solution for sealing leaks in metal fuel tanks and radiators. With its quick cure time, excellent sealing capabilities, and ease of use, it is a convenient option for automotive enthusiasts and professionals alike. However, it is crucial to follow the instructions carefully and ensure that the product is suitable for the specific type of repair being undertaken.
Dissolving Sludge in Diesel Fuel Tanks: Quick and Easy Methods
You may want to see also
Explore related products
Repairs holes, seams, cracks in metal tanks, radiators, gas cans
The Permatex Fuel Tank and Radiator Repair Kit is a versatile and essential tool for sealing holes, seams, or cracks in metal tanks, radiators, or gas cans. It is a two-component stick that, when kneaded together, forms a strong, durable seal. The product provides excellent chemical and moisture resistance and is non-flammable.
The Permatex Radiator Repair Kit is perfect for emergency repairs, ensuring that you can address leaks and damage efficiently. It is designed to repair small holes in all metal radiator tanks and is not recommended for use on plastic gas tanks. Repairs can be made ideally when the temperature is between 50°F and 75°F (10°C and 25°C). At lower temperatures, the repair will take longer to cure.
The Permatex Radiator Repair Kit is simple to use, even for those with minimal repair experience, as it comes with easy-to-follow, illustrated instructions. Before beginning the repair, it is important to read all the directions. First, ensure that the engine has cooled completely, and never open a hot radiator. Remove the radiator cap and wash your hands to ensure they are free of dirt, oil, grease, and rust. Next, sand the area around the damage with sandpaper and clean all surfaces using the provided alcohol swab. Finally, knead the two-component stick together and apply it to the damaged area. The repair will be complete when the resin has cured, which should take around 30 minutes.
Permatex is a leading manufacturer and distributor of premium chemical products for automotive maintenance and repair, home, and hardware markets. Their product categories include gasket makers, sealants, hand cleaners, thread lockers, adhesives, cleaners, repair kits, and lubricants.
Draining the 2003 Saturn Vue Fuel Tank: Step-by-Step Guide
You may want to see also
Explore related products
Permatex's Plastic Tank Repair Kit
The repair process involves mixing a two-part resin that hardens within 8 to 10 minutes and cures in 30 minutes. It is important to work quickly as the resin can generate significant heat, causing it to harden prematurely. Repairs are best conducted at temperatures between 50°F and 75°F (10°C and 25°C), as lower temperatures prolong the curing process.
The kit includes everything needed for professional-quality repairs, with state-of-the-art components and easy-to-follow instructions. It can effectively repair cracks up to 4 inches in length and holes up to 0.375 inches in diameter. Before beginning, it is crucial to read all directions and ensure proper ventilation. Additionally, the repair area should be prepared by draining the tank or reducing the fluid level at least 2 inches below the damaged area. Any oil, grease, tar, or dirt must be removed, and the affected area should be sanded beyond the damage.
Customer reviews for the Permatex Plastic Tank Repair Kit offer mixed opinions. Some users praise its effectiveness in sealing cracks and leaks, while others report that it did not work for their specific applications, such as plastic radiators or fuel tanks. It is important to carefully follow the instructions and work quickly due to the resin's fast-setting nature. Overall, the kit provides a cost-effective solution for repairing leaks and cracks in various plastic tanks, excluding plastic fuel tanks.
Keep Your Boat Afloat: Preventing Water in Fuel Tanks
You may want to see also
Explore related products
Permatex's repair resin
Permatex is a leading manufacturer and distributor of premium chemical products for automotive maintenance and repair, home and hardware markets. Its product categories include gasket makers, sealants, hand cleaners, threadlockers, adhesives, cleaners, repair kits, and lubricants.
The Permatex Fuel Tank Repair Kit includes everything required for making professional-quality permanent repairs in just minutes. It comes with easy-to-follow instructions and state-of-the-art components. The kit can be used to repair cracks up to 4 inches (10 cm) long and holes up to 3/8 inch (9 mm) in diameter.
It is important to note that this product is not recommended for use on plastic fuel tanks. For repairing plastic tanks, Permatex offers a separate Plastic Tank Repair Kit, which can be used to repair all types of plastic tanks. This kit also includes everything needed for a full repair and comes with easy-to-follow instructions.
Applying POR 15 to Your Motorcycle Fuel Tank: A Step-by-Step Guide
You may want to see also
Frequently asked questions
No, Permatex Fuel Tank Repair is not suitable for use on plastic or nylon radiators. It is designed for use on metal tanks, radiators, or gas cans.
The Permatex Fuel Tank Repair Kit comes as a two-component stick that can be kneaded together and used to seal holes, seams, or cracks. It provides excellent chemical and moisture resistance and is non-flammable.
The Permatex Fuel Tank Repair resin is designed to begin hardening within 8 to 10 minutes and typically cures in 30 minutes. Repairs made at lower temperatures may take longer to cure.
Yes, the Permatex Fuel Tank Repair Kit eliminates the need for dangerous welding. However, it is important to ensure adequate ventilation and carefully follow the instructions provided by the manufacturer.
