Edge Insight's Fuel Pressure Reading Capability Explored

The Edge Insight CTS2 is a monitoring device that can be used to track fuel pressure. Users can set up the device to read fuel pressure by connecting it to a laptop and updating it to the newest CTS version. The Edge Insight CTS2 is compatible with the Edge Products 98607 1/8 NPT 0 - 100 PSIg EAS Pressure Sensor, which can be purchased separately on Amazon. However, the Edge Insight device and its complementary parts are expensive, with some users expressing frustration at the high cost.

Edge Insight CTS2 and fuel pressure

The Edge Insight CTS2 is a monitoring device that can be installed in certain vehicles to provide data on various metrics. It is compatible with the EAS Pressure Sensor, which can be used to monitor fuel pressure.

The EAS Pressure Sensor is a 0-100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system. It comes with the correct wires and connectors, saving time and money on installation. The sensor can be used to monitor fuel rail pressure, among other data points.

To set up the Edge Insight CTS2 to read fuel pressure, you may need to update the device to the newest CTS Version 3.0 and use the MyStyle software to set up the CTS pressure sensor PID.

It is important to note that purchasing the Edge Insight CTS2 device, the EAS Pressure Sensor, and any required additional parts can be expensive. The total cost may exceed the cost of the entire monitor.

Additionally, some users have reported issues with the device not turning off or freezing, requiring them to unplug it. Therefore, it is recommended to research and compare different products before making a purchase decision.

Edge Insight CTS and fuel pressure sensor

The Edge Insight CTS is a monitoring device that can be used to track a variety of parameters in a vehicle. While it does not come with a fuel pressure sensor, this can be added as an extra feature.

To add fuel pressure monitoring to the Edge Insight CTS, you will need to purchase a few additional parts. Firstly, you will require the Edge Products EAS Universal Sensor Input, which allows any 0-5v sensor to be used. This will need to be connected to the Edge Products EAS Pressure Sensor, which will measure the fuel pressure. The pressure sensor is designed to work with the Edge Insight CTS and has a measurement range of 0-100 PSI.

The exact installation process may vary depending on the vehicle's specific setup, but it typically involves connecting the pressure sensor to the fuel system and then plugging it into the universal sensor input. In some cases, an adapter or harness may be required to complete the installation.

It is important to note that adding fuel pressure monitoring can be a costly endeavour, as the required parts can be expensive. Additionally, some users have reported issues with the pressure sensor not working correctly out of the box or not being compatible with their vehicle's setup. Therefore, it is essential to carefully research the required parts and installation process before purchasing.

Overall, while it is possible to add fuel pressure monitoring to the Edge Insight CTS, it may require a significant investment and careful planning to ensure a successful installation.

Edge Insight and fuel rail pressure

The Edge Insight CTS2 is a monitoring device that can be installed in certain Ford and Dodge vehicles. It can be used to monitor fuel pressure, but this requires purchasing additional parts. The parts required include an EAS starter kit, an EAS universal sensor input, and an EAS pressure sensor. These parts can be purchased from the Edge Products website.

Once the required parts are acquired, they need to be installed and configured correctly. This may involve removing the plug on the fuel bowl and connecting the sensors to the starter kit and the fuel system. In some cases, it may be necessary to update the firmware on the Edge Insight CTS2 device and configure the software to recognise the fuel pressure sensor.

It's important to note that the cost of purchasing and installing these additional sensors can be significant, potentially exceeding the cost of the Edge Insight CTS2 monitor itself.

Additionally, some users have reported issues with the device freezing or failing to turn off, requiring a restart of the vehicle. However, this may be addressed by using a different reader or tuner device, such as the MiniMaxx, which has been reported to have faster cycling and better reliability.

For those looking to monitor fuel pressure specifically, an alternative option to consider is installing a fuel pressure gauge. This may be a more cost-effective solution, especially if you already have analog gauges for other functions.

Edge Insight and expandable EGT kit

The Edge Insight CTS2 and CTS3 are monitoring devices that can be used to read fuel pressure. The Edge Accessory System (EAS) was created with future expandability in mind, allowing users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.

The Edge Insight EGT Probe Starter Kit with EAS is one such accessory. The kit includes a starter cable and an EGT probe for CS and CTS monitors. The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat, which can cause engine damage. With the EAS system, users can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be more precise.

The Edge Insight and expandable EGT kit is easy to connect and configure. It is also expandable to include additional data feeds, such as fuel pressure and air temperature. However, it should be noted that some users have reported issues with the EGT probe, with one reviewer stating that they had to contact Edge for support after their probe went "haywire" a couple of months after installation.

Overall, the Edge Insight and expandable EGT kit provide a convenient way to monitor critical engine data and can be a valuable tool for diesel drivers, especially when towing, as it helps prevent overheating.

Edge Insight and fuel pressure gauge

The Edge Insight CTS2 and CTS3 are automotive monitoring devices that can be used to monitor fuel pressure. However, to monitor fuel pressure, you will need to purchase additional parts, such as the EAS pressure sensor, the EAS universal sensor input, and the EAS starter kit. These parts can be purchased from the official Edge Products website or from third-party retailers such as Amazon and PEPE DEALS INC.

The installation process involves connecting the pressure sensor to the universal sensor input and then plugging the assembly into the Edge Insight monitor. The pressure sensor measures fuel pressure and sends the data to the monitor, which then displays the readings. This setup allows users to keep track of their vehicle's fuel pressure in real time.

It is important to note that the Edge Insight monitor must be updated to the newest CTS Version 3.0 for the fuel pressure reading to work accurately. Additionally, the MyStyle software from the Edge website needs to be downloaded to set up the CTS pressure sensor PID.

The Edge Insight fuel pressure monitoring system is designed to be plug-and-play, making the installation process relatively straightforward. The system uses pre-wired weatherpack connectors, eliminating the need for soldering or splicing wires. This results in a clean and clutter-free installation, with wires running under the door or dash trim.

While the Edge Insight fuel pressure monitoring system offers a convenient and accurate way to monitor fuel pressure, it is a pricey option. The cost of the required parts can quickly add up, with some users expressing surprise at the total expense. However, the system provides a sleek and integrated solution for those willing to invest in it.

Frequently asked questions